| Content |
- Suitable for vocals, instruments and as a room microphone
- Polar pattern: Cardioid
- Frequency response: 20 - 18000 Hz
- Sensitivity: -30dB
- Impedance: 150 ohms
- Max. sound pressure level: 134 dB
- Robust "built-like-a-tank” construction
- Dimensions: 155 x 48 mm
- Weight: 0.21 kg
- Colour: Black
- Includes microphone suspension and XLR cable
|
The AVANTONE CK-6 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics…but at a fraction of their cost!
The rugged CK-6 microphone body and capsule assembly are precision machined of Brass. Aesthetically the compact body features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly. Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.
This Transformerless CLASS A FET Microphone w/ 32mm gold sputtered thin Mylar capsule is designed with circuitry that will yield pleasing professional results comparable to much more expensive designs. It also features -10 dB pad & 80 Hz LF roll off switches for varied recording situations.
The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.
Applications
Studio vocals, acoustic guitar, mandolin, drum overheads, piano, etc…
Specifications
Type: True Transformerless Condenser
Polar Pattern: Cardioid
Frequency Response: 35-20,000 Hz +/- 3.5dB
Output Impedance: |
| Acoustical operating principle | Pressure transducer | | Directional pattern | Omnidirectional | | Frequency range | 20 Hz ... 20 kHz | | Sensitivity at 1 kHz into 1 kohm | 20 mV/Pa | | Rated impedance | 50 ohms | | Rated load impedance | 1000 ohms | | Equivalent SPL CCIR 468-3 | 28 dB | | Equivalent SPL DIN/IEC 651 | 15 dB-A | | S/N ratio CCIR 468-3 | 66 dB | | S/N ratio DIN/IEC 651 | 79 dB | | Max. SPL (tube characteristic) | K | | Dynamic range (of the amplifier) | K | | Maximum output voltage | 8 dBu | | Weight | 800 g | | Diameter | 78 mm | | Length | 165 mm |
* THD of the microphone amplifier at an input voltage which is equivalent to the capsule output voltage at the specified SPL.
|
Rode's new NTK has the quality and warmth demanded from a tube mic.
With the large 1 in. capsule gold-plated membrane and twin triode tubes
(hand graded and selected), Rode is again setting the standard for value.
This is a tube mic designed exclusively for recording professionals who
want what only the best can offer.
Features:
Dynamic range of 47dB
Ultra low noise of only 12dB
Internal capsule shock mounting
Cardioid polar pattern
20Hz - 20kHz frequency response
Includes a power supply, 30 ft. cable, and stand adapter
Technical Description:
Capsule: Externally polarised 1 in. pressure-gradient condenser
Active Electronics: Unity-gain closed-loop impedance converter;
vacuum-tube input with bipolar buffering
Pickup Pattern: Cardioid
Frequency Response: 20Hz - 20kHz (+/-6dB)
Output Impedance: 200 ohms (100 ohms per leg)
Sensitivity: -38dB re 1V/Pa (12mV @ 94dB SPL) +/-1dB
Equivalent Noise: 12dB SPL (A-weighted per IEC268-15) +/-2dB
Maximum Output: > +29dBu (@ 1kHz, 5% THD into 1k (load)
Dynamic Range: > 147dB (A-weighted, per IEC268-15)
Maximum SPL: > 158dB SPL (@ 1kHz, 5% THD into 1k (load)
Signal/Noise Ratio: > 82dB (A-weighted, per IEC268-15)
External power supply: 100-120V/200-240V AC (user selectable)
50Hz/60Hz, 25VA maximum
Packed Weight: 4.53 kg (Mic only 760 gm)
Accessories included:
Power Supply
30 ft (10 m) Multicore Cable
M2 Standmount plus 3/8-5/8 in. Thread Adapter
Optional Extras: SM2 Shockmount
|
| Acoustical operating principle | Pressure gradient transducer | | Directional pattern | Cardioid | | Frequency range | 20 Hz ... 20 kHz | | Sensitivity at 1 kHz into 1 kohm | 20 mV/Pa | | Rated impedance | 50 ohms | | Rated load impedance | 1000 ohms | | Equivalent SPL CCIR 468-3 | 24 dB | | Equivalent SPL DIN/IEC 651 | 12 dB-A | | S/N ratio CCIR 468-3 | 70 dB | | S/N ratio DIN/IEC 651 | 82 dB | | Maximum SPL | 114 dB for THD | | Maximum output voltage | 8 dBu | | Dyn. range of the mic. amplifier DIN/IEC 651 | 102 dB for THD | | Supply voltage | Power supply N 149 A | | Matching connector | Microphone: DIN 8F, Power Supply: XLR 3F | | Weight | 460 g | | Diameter | 57 mm | | Length | 142 mm |
|
- One-inch large-diaphragm, true condenser cardioid transducer
- Rugged all-metal body
- Roadworthy construction
- Switchable 20 dB preattenuation pad
- Switchable bass cut filter
- Legendary AKG sound quality
- Designed and engineered by AKG in Vienna, Austria
- Comes with spider-type shock mount and aluminium carrying case
The Perception 220 is a large-diaphragm true condenser microphone offering outstanding build quality and excellent value. Its many useful features and included accessories make this microphone uncommonly versatile. It delivers a classic warm, clear sound and conforms to the stringent standards defined for AKG recording products. These standards are based on AKG΄s six decades of experience in making microphones and on input from sound engineers around the world who use AKG products every day.
Its 1-inch large-diaphragm true condenser transducer brings AKG studio quality to the project studio as well as all other areas of recording and live sound applications. A switchable bass cut filter and preattenuation pad make it perfectly suited even for use on loud sound sources producing sound pressure levels up to 155 dB SPL. The rugged and roadworthy design makes it also a perfect choice for on-stage applications. The Perception 220 comes with a spider-type shock mount and a rugged metal case. |
| Type |
1" Large Diaphragm True Condenser |
| Polar pattern |
cardioid |
| Frequency range |
20 to 20,000 Hz |
| Sensitivity |
18 mV/Pa (-35 dBV) |
| Max. SPL |
135 dB/155 dB (0/-20 dB) for 0.5% THD |
| Equivalent noise level |
16 dB-A (IEC 60268-4) |
| Signal/noise ratio (A-weighted) |
78 dB |
| Preattenuation pad |
0 dB, -20 dB |
| Bass filter |
12 dB/octave at 300 Hz |
| Impedance |
=1000 ohms |
| Current consumption |
|
|
|
Reviews
There are no reviews yet.