Content | Shelf speaker, 2-way
The Monitor Supreme 102 is a very compact shelf speaker, which is equipped with a 110 mm bass-midrange driver and a newly developed tweeter. Both precision drivers are adequately accommodated in a low-resonance MDF cabinet with visually offset baffle.
The speaker, which is available in two wood finishes, is equipped with a specially coated paper cone and offers an astonishing level of dynamics and good precision. The 13 mm Mylar dome is perfectly embedded in the new tweeter flange and reproduces the entire frequency range above 3400 Hz with exceptional accuracy.
Description
Value
Principle
2 way
Equipment
13 mm dome-tweeter
110 mm woofer-midrange
Power Handling (RMS / Max.)
60 / 120 Watts
Sensitivity (2.8V/1m)
89 dB
Impedance
4 – 8 Ohms
Frequency Response
42 - 36000 Hz
Recommended Amplifier Output
20 - 110 Watts
Dimensions (WxHxD)
149 x 250 x 190 mm
Weight
2.8 kg
Cabinet surface
Ash decor black
Mocca decor |
Itʼs widely understood that the sound of surround TVs cannot compete with the excitement of a properly designed and equalised home theatre system. But great sound comes at the expense of living space…until now. The wall-hugging RX-FX surround speaker reconciles the problem by providing a convincing, enveloping timbre-consistent surround sound that places you on the edge of your seat and at the heart of the action. Discreet enough to be flush-mounted on side or rear walls, the RX-FX design will blend with the system and your décor so completely youʼll wonder why you ever thought of compromise. Itʼs also immensely flexible sonically, offering direct or diffuse sound effects at the flick of a switch. System Format: 2 Way Frequency Response: 60Hz - 35kHz Sensitivity (1W@1M): 89dB Nominal Impedance: 6 Ohms Maximum SPL (dBA): 111.8 Power Handling (RMS): 80W Recommended Amplifier Requirements (RMS): 10-80W Bass Alignment: Sealed Cabinet Tweeter Crossover Frequency: 2.1kHz Drive Unit Complement: 1 x 6" RST® Bass/Mid driver. 2 x 1" (25mm) C-CAM® gold dome tweeters Product External Dimensions: (H x W x D) 250 x 300 x 120 mm (9 13/16 x 11 13/16 x 4 3/4 inch) Individual Weight: 4.69 Kg (10.38 lb) User's Manual Available in colors
|
Driver Complements Mid/Woofer 1 - 6 1/2" Diameter (16.51cm) Dynamic Balance driver with Super Cell Areated Polypropylene cone Midrange 1 - 3 1/4" Diameter (8.26cm) Dynamic Balance driver with Super Cell Aerated Polypropylene cone Tweeter 1 - 1" Diameter (2.54cm) Enhanced Ring Radiator Dynamic Balance tweeter Electrical Overall Frequency Response 36Hz-40kHz Lower -3dB Limit 50Hz dB Upper -3dB Limit 30kHz dB Nominal Impedance compatible with 8 ohm outputs ohms Recommended Amplifier Power 20-200 w/channel Efficiency 88 dB Crossover Orth Crossover Crossover (mid-high array) 2800HZ Inputs Dual Gold-Plated Binding Posts Dimensions Cabinet Size 16 3/4" H x 8" W x 14 9/16" D (42.55cm H x 20.32cm W x 36.99cm D) Mounting Options speaker stands or shelf mount Enclosure Type Sealed Enclosure Type (subwoofer) PowerPort bass venting Shipping/Other Product Weight 29.60 lbs. (13.43kgs) Shipping unit: each Total Shipping Weight 32.50 lbs. (14.74kgs) Speaker Warranty 5 years parts and labor (original purchaser) ALSO AVAILABLE IN "EBONY" COLOR
|
The PL100 is a truly compact, wideband speaker capable of expressing the entire micro-dynamic texture of every performance. A rigid cabinet construction, proprietary bracing techniques and advanced damping technologies combine to provide the optimum environment for its wonderfully accurate and detailed C-CAM ribbon tweeter and its lightening-fast, precision-engineered RDT bass driver. The PL100 will draw a rich, natural radiance from the most demanding of music and film scores and reproduce the power and scale of dramatic passages with a breathtaking fidelity 1 x 6.5” RDT® Bass/mid-range driver 1 x C-CAM® high frequency ribbon transducer Ported. HiVe® II technology All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather. Finish options: Santos Rosewood veneer with clear gloss piano lacquer Ebony veneer with clear gloss piano lacquer Piano black gloss Optional dedicated floor stands are available Frequency Response: 42 Hz - 100 KHz Sensitivity (1W@1M): 88 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 112.6 dBA Power Handling (RMS): 120 W Recommended Amplifier Requirements (RMS): 50 - 120 W Bass Alignment: Ported HiVe II Technology Mid / H.F Crossover Frequency: 2800 Hz Bass Low Pass Crossover Frequency: N/A Drive Unit Compliment: 1 x 6.5" RDT Bass/mid-range driver 1 x C-CAM high frequency ribbon transducer External Dimensions - Excluding Stand (H x W x D): 370 x 225 x 285 mm (14 9/16 x 8 7/8 x 11 1/4 inch) Stand External Dimensions - (H x W x D): 615 x 340 x 365 mm (24 3/16 x 13 3/8 x 14 3/8 inch) Weight (each) Excluding stands: 13 Kg (28.6lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Woven Kevlar
Crossover Tuning
Nautilus Tapering Tube
Flowport
Technical features Nautilus™ tube loaded aluminium dome tweeter
Kevlar® brand fibre cone bass / midrange
Flowport™
Description 2-way vented-box system
Drive units 1x ø25mm (1 in) aluminium dome high-frequency
1x ø130mm (5 in) woven Kevlar® cone bass / midrange
Frequency range -6dB at 45Hz and 50kHz
Frequency response 55Hz - 22kHz ±3dB on reference axis
Dispersion Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc
Sensitivity 84dB spl (2.83V, 1m)
Harmonic distortion 2nd and 3rd harmonics (90dB, 1m)
|
Small is beautiful. The 686 S2 is the most compact speaker in the series, but don't underestimate its power and precision. That's thanks to a new Decoupled Double Dome tweeter and improved design.
An ideal bookshelf or wall-mounted speaker, the 686 S2 is designed to fit into any space and still sound perfect. Its main driver is a 5-inch bass/midrange unit which benefits from a new 25mm voice coil which makes for a higher sensitivity speaker with bass more suited for placement near a wall.
Bass performance is vital but can often suffer in smaller speakers. Not in the 686 S2, however. That's because a front-firing Flowport, dimpled like a golf ball around the aperture for smoothly regulated airflow, delivers superior bass response without the risk of rattle. Its placement ensures the speaker cabinet is slimmer than predecessors and can be wall mounted without affecting performance.
Like the rest of the range, and despite its smaller size, the 686 S2 also features a Decoupled Double Dome aluminium tweeter for superior high-frequency response. The 686 S2 even features a built-in bracket for easy wall mounting, although this small, versatile and precise speaker sounds great anywhere.
Woven Kevlar | Yes | Crossover Tuning | Yes | Nautilus Tapering Tube | Yes | Flowport | Yes | Technical features | Decoupled Double Dome aluminium tweeter with NautilusTM tube loading
FlowportTM | Description | 2-way vented-box system | Drive units | 1x ø25mm (1 in) aluminium dome high-frequency
1x ø130mm (5 in) woven Kevlar® cone bass/midrange | Frequency range | -6dB at 54Hz and 50kHz | Frequency response | 62Hz - 22kHz ±3dB on reference axis | Dispersion | Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc | Sensitivity | (84)85dB spl (2.83V, 1m) | Harmonic distortion | 2nd and 3rd harmonics (90dB, 1m)
|
|
Reviews
There are no reviews yet.