Content | Professional subwoofer 315 mm., cloth edge, paper cone.
- RMS power output: 500 watt
- Impedance: 8 Ohm
- Sensitivity: 97 dB
- Frequency response: 56-3500 Hz
- Magnet weight: 125 oz
- Voice coil diameter: 100 mm
- Recessed diameter: 285 mm
- Mounting depth: 120 mm
PARAMETERS
- Fs: 56 Hz
- Qes: 0.33
- Qms: 8.10
- Qts: 0.32 |
400 W continuous program power capacity |
| 70° nominal coverage |
| 60 – 18000 Hz response |
| 96 dB sensitivity |
| Single Neodymium magnet assembly |
| XO-6 dedicated crossover network |
|
1400 W continuous program power capacity |
|
100 mm (4 in) copper voice coil |
|
45 – 1000 Hz response |
|
93 dB sensitivity |
|
Double silicone spider with optimized compliance |
|
Specification Nominal Diameter 320 (12) mm (in) Nominal Impedance (1) 8 Ohm Minimum Impedence 7.5 Ohm Nominal Power Handling (2) 450 W Continuous Power Handling (3) 900 W Sensitivity (1W/1m) (4) 95 dB Frequency Range 40 - 1000 Hz Voice Coil Diameter 76 (3) mm (in) Winding Material Copper Former Material Glass Fibre Winding Depth 22 (0.9) mm (in) Magnetic Gap Depth 10.5 (0.4) mm (in) Flux Density 1.15 T
Thiele & Small Parameters Fs 42 Hz Re 6.1 Ohm Qes 0.22 Qms 3.8 Qts 0.2 Vas 75 (2.6) dm3 (ft3) Sd 522 (80.9) cm2 (in2) Eta Zero 2.4 % Xmax +/- 7 mm Xvar +/- 9 mm Mms 74 g Bl 23.5 Txm Le 2 mH
Mounting and Shipping Info Overall Diameter 316 mm (12.4 in) Bolt Circle Diameter 296 mm (11.6 in) Baffle Cutout Diameter 282 mm (11.1 in) Depth 140 mm (5.5 in) Flange and Gasket Thickness 16 mm (5/8 in) Net Weight 7.6 kg (16.7 lb) Shipping Weight 8.4 kg (18.5 lb) Shipping Box 340x340x170 mm (13.4x13.4x6.7 in) 1For different impedances, please ask. 22 hours test made with continuous pink noise signal (6 dB crest factor). Power calculated on rated minimum impedance. 3Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. |
Long excursion 12" woofer with 800W power handling for
subwoofer application. A special 3" copper voice coil using
proprietary high temperature adhesives and an optimized
magnet assembly guarantees superb LF dynamic range with a
very low distortion. Due to the linear characteristics of the 12
PZ 32, exceptional results are obtained in horn loaded
subwoofer applications.
Specifications
Nominal Diameter 320 mm (12 in)
Nominal Impedance 8 Ω
Minumum Impedance 7.8 Ω
Power Handling
(70 –700 Hz)
Nominal1 400 W
Continuous Program2 800 W
Sensitivity (1W/1m)3 95 dB
Frequency Range 40-2500 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 22 mm (7/8 in)
Magnetic Gap Depth 10 mm (3/8 in)
Flux Density 1.1 T
Also available in 4 Ω, data upon request
Thiele & Small Parameters4
Fs 38 Hz
Re 6.2 Ω
Qes 0.2
Qms 5.9
Qts 0.19
Vas 102 dm3 (3.6 ft3)
Sd 522 cm2 (80.9 in2)
η0 2.7%
X max ± 5.5 mm
X var ± 5.5 mm
Mms 64 g
Bl 21.7 T·m
Le 2.7 mH
Mounting and Shipping Information
Overall Diameter 316 mm (12.4 in)
Bolt Circle Diameter 296 mm (11.6 in)
Baffle Cutout Diameter 282 mm (11.1 in)
Depth 134 mm (5.3 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 7.6 kg (16.7 lb)
Shipping Weight 8.5 kg (18.7 lb)
Shipping Box 380x380x170 mm
(15x15x6.7 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2500 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test.
|
Building on the platform of the Blue, the Gold is a higher-powered, Alnico-magnet speaker that recreates the unmistakable sonic signature of a ʽwell played-inʼ original. Over time, the high frequencies of a Blue soften and become less chalky as the cone becomes more flexible – a much sought after characteristic that the Gold exhibits straight out of the box. Also present in the Gold sound from the outset is an added warmth and complexity in the midrange which, coupled with the classic Alnico qualities of a laid-back attack, rounded low end and brilliant belllike highs, deliver huge rhythm voicings and saturated vocal lead tones.
The Gold is a wonderfully expressive and revealing loudspeaker, affording guitarists an unprecedented degree of dynamic control. It has already become a favourite for many working players worldwide whether picking and bending with Brad Paisley, or rocking hard with Danny Spitz of Anthrax.
General specifications | Nominal diameter | 12“, 305mm | Power Rating | 50W | Nominal impedance | 8Ω and 15Ω | Sensitivity | 100dB | Chassis type | Pressed steel | Voice coil diameter | 1.75“, 44.5mm | Voice coil material | Round copper | Magnet type | Alnico | Frequency range | 75-5000Hz | Resonance frequency, Fs | 75Hz | DC resistance, Re | 6.4Ω & 11.8Ω | Mounting Information | Diameter | 12.2“, 309mm | Overall depth | 6.5“, 165mm | Magnet structure diameter | 5.0“, 128mm | Cut-out diameter | 11.1“, 283mm | Mounting slot dimensions | 0.31“, 7.9mm Ø | Number of mounting slots | 4 | Mounting slot PCD | 11.7“, 297mm | Unit weight | 9.3lb, 4.2kg |
|
Reviews
There are no reviews yet.