Content | Passive subwoofer
- 320 mm woofer, 100 mm voice coil
- Continuos power output: 500W RMS
- Frequency response: 50 - 120 Hz
- Sensitivity: 97 dB
- Impedance: 8 Ohm
- Speakon input
- Speakon output
- Wooden cabinet
- Dimensions: 42*46.5*53cm
- Weight: 25kg
- Package: 1 piece each box | Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 18 S
Description High-power-capacity 18" subwoofer with high-quality
Description crossover for powerful low-end kick
Power handling capacity RMS: 500 W
Power handling capacity Program: 1000 W
Frequency response within +/-3dB 48 Hz ? 150 Hz (internal wedge)
Frequency response @ -10dB 38 Hz ? 150 Hz (internal wedge)
Speaker 1 x 18“
Impedance 4 Ohm
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 129 dB
Crossover frequency 150 Hz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Dimensions (WxHxD) 53 cm x 61 cm x 64 cm
Dimensions (WxHxD) 20 3/4? x 24? x 25 1/4?
Weight 41.6 kg
Weight 91.52 lbs |
The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.
GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.
|
The black Electro-Voice EVID-S12.1 is a 12” subwoofer designed to provide low-end reinforcement for system designers, installers, and audio engineers configuring systems for background and foreground music in stores, clubs, eateries, schools, and more. Its acoustic ports and 12” dual voice-coil, high-excursion woofer yield a frequency response of 40 to 140 Hz and a 127 dB maximum SPL.
Inputs and outputs utilize spring-loaded speaker terminals. The subwoofer can accept a stereo input and drive up to four satellite speakers (available separately). It includes hardware for mounting to a wall or corner and has an eyebolt for the attachment of a safety line.
12" dual voice-coil, high-excursion woofer and acoustic ports yield a frequency response of 40 to 140 Hz800W peak (200W continuous) power handling for 127 dB maximum SPL (133 dB peak)Spring-loaded speaker terminals for inputs and outputsSimultaneously drive up to four satellite speakers (available separately)Logo can be replaced to match speaker orientationIncludes hardware for mounting subwoofer to a wall or corner
LF Driver |
1 x 12" / 305 mm |
Input |
Spring-loaded speaker terminals |
Output |
Spring-loaded speaker terminals |
Frequency Response |
40 to 140 Hz (-10 dB) |
Sensitivity |
104 dB (eighth space on corner averaged 60 to 100 Hz, 1 W) |
Maximum SPL |
127 dB calculated, 133 dB peak |
Power Handling |
800 W peak (200 W with continuous pink noise for 100 hours) |
Low Impedance |
Yes |
Nominal Impedance |
8 Ohms |
Dimensions (H x W x D) |
16.3 x 23.0 x 11.9" / 413 x 584 x 303 mm |
Weight |
39.2 lb / 17.8 kg |
| The S4012 high-efficiency band pass subwoofer is the ideal bass frequency extension to complement the RCFACUSTICA Compact series two-way loudspeakers for small size installations and distributed music systems.
The low-frequency transducer is an RCF Precision high-power 12” woofer with a 3” inside/outside voice coil to minimize power compression and extend the life of the product.
This new woofer design guarantees a fast and controlled reproduction of the bass frequency range. Using bandpass loading to the transducer, the subwoofer design ensures an efficient acoustic response down to 45 Hz.
The cabinet features two Neutrik Speakon™ connectors in a recessed input plate.
APPLICATIONS
- • Low Frequency Enhancement
- • Music Enhancement
- • Special Effects Reinforcement
- • Entertainment Systems
- • Live Music Reinforcement
- • Small Club Sound Systems
- • Infill Sub Bass Enhancement
General Specs
- 12" high-efficiency RCF Precision 3" voice-coil woofer with Inside/Outside Coil Technology
- Horn reflex loaded woofer
- 124 dB maximum sound pressure level
- Response down to 45 Hz
- Rectangular box enclosure with protective metal grille
- Baltic Birch cabinet with black, heavy duty, textured epoxy paint
- 35 mm standard pole mount in top section of cabinet
- Integrated hand carry points
Acoustical Specs
- Frequency Response -10 dB:45Hz ÷ 200 Hz
- Max SPL @ 1m:124dB
- System Sensitivity:92dB
- Nominal Impedance:8Ω
- Power Handling:400W
- Peak Power Handling:1600W
- Recommended Amplifier:800W
Cabinet Specs
- Cabinet Material:15 mm birch plywood construction
- Handles:2 on side
- Pole Mount/Cap:Yes
- Grille:Custom perforated steel grille
- Colour:Black, scratch resistant paint
Size/Weight
- Height:360 / 14.17 mm/inch
- Width:500 / 19.69 mm/inch
- Depth:400 / 15.75 mm/inch
- Net Weight:20 / 44 kg/lbs
|
The S8015 is an extremely compact, high output, band-pass subwoofer able to deliver tight and fast controlled bass response.
The new high power high sensitivity 15" woofer is the result of the latest RCF experience in sub-bass transducers and compact subwoofer design and manufacturing.
The band-pass configuration offers a significant acoustic impact resulting in a fast and controlled reproduction of the bass frequency range.
It is capable of a power of 1 kW RMS and able to deliver a MAx SPL in excess of 135 dB.
The cabinet's shape is unobtrusive rectangular low profile to be used under sofa or under limited height stages; the cabinet is constructed of Baltic Birch plywood and finished in a very resistant, textured black paint.
Rubber feet are also installed.
Applications
- Low Frequency Enhancement
- Under-sofa and under-stage constraints
- Music Enhancement
- Club-Bar Bass Enhancement
- Special Effects Reinforcement
- Entertainment Systems
- Live Music Reinforcement
- Small and Mid Club Sound Systems
- Infill Sub Bass Enhancement
- Auditoriums
- AV presentations
- Retail stores
Features |
---|
15" high-efficiency RCF Precision 4" voice-coil woofer with Inside/Outside Coil Technology | Bandpass woofer | 135 dB Max SPL | Response down to 43 Hz | Rectangular box enclosure |
Baltic Birch cabinet finished in a very resistant, textured black paint with rubber feet
Acoustical Specifications |
---|
Frequency Response -10 dB: | 43 Hz | ÷ 0.25 kHz | Max SPL @ 1m: | 135 dB | | System Sensitivity: | 99 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 800 Watt | | Peak Power Handling: | 2400 Watt | | Recommended Amplifier: | 1500 | |
TRANSDUCERS |
---|
Woofer: | 15" woofer, 4" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 900 Watts AES | | Sensitivity: | 97 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Colour: | Black, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 310 / 12.20 mm/inch | | Width: | 900 / 35.43 mm/inch | | Depth: | 380 / 14.96 mm/inch | | Net Weight: | 23.4 / 51.58 Kg/Lbs |
|
|
Reviews
There are no reviews yet.