MIPRO ACT-30Hr Remote Volume Control Handheld Transmitter

249.24 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Extremely rugged, ergonomically designed housing. The unique flat top multi-layered steel grille protects the capsule against impact, rolling, pop noise and ensures sound clarity. The unique flat top multi-layered steel grille for condenser capsules and round top for dynamic capsules protect the capsule against impact, rolling and pop noise. The upper grille is able to […]

 

Read more

  • Extremely rugged, ergonomically designed housing.
  • The unique flat top multi-layered steel grille protects the capsule against impact, rolling, pop noise and ensures sound clarity.
  • The unique flat top multi-layered steel grille for condenser capsules and round top for dynamic capsules protect the capsule against impact, rolling and pop noise. The upper grille is able to be detached easily for cleaning and hygiene practices.
  • Premium true condenser microphone capsule provides high fidelity, wide frequency response, high dynamic range, rapid transient response, clarity and accurate sound reproduction.
  • Proprietary lockable silent on/off switch to avoid accidental power-off during performance.
  • Impact-resistant battery compartment holds 2 AA batteries.
  • Interchangeable colored rings for microphone channel identification on stage.
  • LCD displays group, channel, battery level & error message codes.
  • Low spurious PLL-synthesized technology enhances frequency stability and reliability. Patented “Built-in” antenna design.
  • Worldʼs first ACT™ function provides precise and rapid frequency sync to the transmitters.
  • Industryʼs only digital master control can be adjusted manually or wireless via new ACT-30Hr handheld transmitter microphone. (for MA-708 & MA-808 portables)

 

 

Built-in Volume Control

Yes. For MA-708 & MA-808 portable installed with MRM-70 & MRM-72 receiver modules.

Housing

Rugged Plastic

Oscillation Mode

PLL Synthesized

Frequency Range

UHF 480~934MHz

Bandwidth

24MHz

Channel Set-Up

ACT Sync

RF Output Power

10~30mW (country dependent)

Spurious Emissions

Weight 0.30 kg

Reviews

There are no reviews yet.

Be the first to review “MIPRO ACT-30Hr Remote Volume Control Handheld Transmitter”

Your email address will not be published. Required fields are marked *

Quick Comparison

MIPRO ACT-30Hr Remote Volume Control Handheld Transmitter removeSHURE FP2/VP68 MICROPHONE WITH FP2 TRANSMITTER removeTOA IR-200M Infrared Wireless Microphone removeSHURE SLX2-BETA87C-R5 Wireless Microphone removeLD SYSTEMS LDWS1000G2MC Wireless condenser handheld microphone removeDAP AUDIO D145282 EB-193 Wireless Beltpack Transmitter remove
NameMIPRO ACT-30Hr Remote Volume Control Handheld Transmitter removeSHURE FP2/VP68 MICROPHONE WITH FP2 TRANSMITTER removeTOA IR-200M Infrared Wireless Microphone removeSHURE SLX2-BETA87C-R5 Wireless Microphone removeLD SYSTEMS LDWS1000G2MC Wireless condenser handheld microphone removeDAP AUDIO D145282 EB-193 Wireless Beltpack Transmitter remove
Image
SKUACT-30HrFP2/VP68IR-200MSLX2-BETA87CLDWS1000G2MCD145282
Rating
Price249.24 incl. GR VAT 385.00 incl. GR VAT 279.00 incl. GR VAT 451.91 incl. GR VAT 240.86 incl. GR VAT 99.20 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Extremely rugged, ergonomically designed housing.
  • The unique flat top multi-layered steel grille protects the capsule against impact, rolling, pop noise and ensures sound clarity.
  • The unique flat top multi-layered steel grille for condenser capsules and round top for dynamic capsules protect the capsule against impact, rolling and pop noise. The upper grille is able to be detached easily for cleaning and hygiene practices.
  • Premium true condenser microphone capsule provides high fidelity, wide frequency response, high dynamic range, rapid transient response, clarity and accurate sound reproduction.
  • Proprietary lockable silent on/off switch to avoid accidental power-off during performance.
  • Impact-resistant battery compartment holds 2 AA batteries.
  • Interchangeable colored rings for microphone channel identification on stage.
  • LCD displays group, channel, battery level & error message codes.
  • Low spurious PLL-synthesized technology enhances frequency stability and reliability. Patented "Built-in” antenna design.
  • Worldʼs first ACT™ function provides precise and rapid frequency sync to the transmitters.
  • Industryʼs only digital master control can be adjusted manually or wireless via new ACT-30Hr handheld transmitter microphone. (for MA-708 & MA-808 portables)
   

Built-in Volume Control

Yes. For MA-708 & MA-808 portable installed with MRM-70 & MRM-72 receiver modules.

Housing

Rugged Plastic

Oscillation Mode

PLL Synthesized

Frequency Range

UHF 480~934MHz

Bandwidth

24MHz

Channel Set-Up

ACT Sync

RF Output Power

10~30mW (country dependent)

Spurious Emissions

VP68 Microphone with FP2 Handheld Transmitter

The FP2 Handheld Wireless Transmitter features either the legendary Shure SM58® cardioid dynamic microphone capsule or the VP68 omnidirectional condenser capsule mounted to lightweight, durable transmitter handles.

FP2 is compatible with all Shure wireless capsules and ideal for use with FP Wireless and SLX Wireless.

FP Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.

    Automatic transmitter setup instantly syncs the transmitter to the receiver frequency
    LED indicator for control lockout, IR/RF sync, and low battery
    Legendary SM58® or VP68 microphone capsule options

The IR-200M is a handheld infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.

Specification
Battery IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces).
Current Consumption Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H)
Infrared Emitter
Wavelength 870 nm (AM: Brightness modulation)
Modulation Method Frequency modulation
Carrier Frequency Channel A: 3.100 MHz
Channel B: 3.350 MHz
Transmission Distance Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space)
Tone Signal 32.768 kHz
Modulation Sensitivity ±4.8 kHz (1 kHz, when SPL of 84 dB is input)
Maximum Input Sound Pressure 120 dB SPL
Microphone Unit Unidirectional electret condenser microphone
Frequency Response 100 Hz - 12 kHz
Preemphasis 300 μs
Battery Operation Time Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N)
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 30 % to 85 %RH
Finish Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter
Dimensions φ37 × 241.8 (H) mm (φ1.46" × 9.52“)
Weight 170 g (0.37 lb) (with battery)
Accessory Screw driver (for setting) …1, Color label (6 colors) …1

 

Shure SLX2-BETA87C-R5 Wireless Microphone

Features:

Automatic Transmitter Setup
Backlit LCD with timeout feature
Frequency and power lockout
3-segment battery fuel gauge
2 AA batteries (included) provide 8 hours of continuous use
518 - 782 MHz operating range

Operating Range Under Typical Conditions

100m (300 ft.)

Note: actual range depends on RF signal absorption, reflection, and

interference

Audio Frequency Response (+/? 2 dB)

Minimum: 45 Hz

Maximum: 15 kHz

(Overall system frequency depends on microphone element.)

Total Harmonic Distortion (ref. +/? 38 kHz deviation, 1 kHz tone)

0.5%, typical

Dynamic Range

>100 dB A-weighted

Operating Temperature Range

?18°C (0°F) to +50°C (+122°F)

Note: battery characteristics may limit this range

Transmitter Audio Polarity

Positive pressure on microphone diaphragm (or positive voltage applied

to tip of WA302 phone plug) produces positive voltage on pin 2 (with

respect to pin 3 of low impedance output) and the tip of the high

impedance 1/4-inch output.

SLX1 Bodypack Transmitter

Audio Input Level

-10 dBV maximum at mic gain position

+10 dBV maximum at 0 dB gain position

+20 dBV maximum at -10 dB gain position

Gain Adjustment Range

30dB

Input Impedance

1 MΩ

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions

108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)

Weight

81 grams (3 oz.) without batteries

Housing

Molded ABS case

Power Requirements

2 ?AA? size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

SLX2 Handheld Transmitter

Audio Input Level

+2 dBV maximum at -10dB position

-8 dBV maximum at 0dB position

Gain Adjustment Range

10dB

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions (including SM58 cartridge)

254 mm x 51 mm dia. (10 x 2 in.)

Weight

290 grams (10.2 oz.) without batteries

Housing

Molded PC/ABS handle and battery cup

Power Requirements

2 ?AA? size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

SLX4 Receiver

Dimensions

42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)

Weight

816 g (1 lb. 13 oz.)

Housing

Galvanized steel

Audio Output Level (ref. +/? 38 kHz deviation with 1 kHz tone)

XLR connector (into 600 Ω load): ?13 dBV

1/4 inch connector (into 3000 Ω load): ?2 dBV

Output Impedance

XLR connector: 200 Ω

1/4 inch connector: 1kΩ

XLR output

Impedance balanced

Pin 1: Ground

Pin 2: (+)

Pin 3: (-)

Sensitivity

?105 dBm for 12 dB SINAD, typical

Image Rejection

>70 dB, typical

Power Requirements

12?18 Vdc at 150 mA, supplied by external power supply

 

96 CHN UHF TRUE DIVERSITY WIRELESS SYSTEM

The LD Systems WS 1000 G2 is an advanced 96 channel true diversity UHF wireless microphone system delivering natural sound with a wide dynamic range, high S/N ratio and low THD in both the 823 - 832 and 863 - 865 MHz bands. The WS 1000 G2 allows the use of up to 5 systems simultaneously and ships in various configurations. You can choose between dynamic or condenser handheld microphones, a beltpack transmitter with either a headset, lavalier-microphone, clip-on wind instrument microphone or guitar adaptor cable. It provides consistent audio transmission from 60 Hz to 16 kHz. Handhelds and beltpack feature convenient LCD indication of channel, group and battery status. Automatic channel scanning and the backlit multifunction receiver display facilitate system setup and operation. The operating time ranges up to 13 hours with high quality AA batteries. All WS 1000 G2 systems come with a rugged ABS plastic carrying case.

  • Handheld with high-quality condenser capsule
  • Convenient handling and channel setting via ASC
  • LCD display of channel, group and battery status
  • 2 AA batteries for up to 13 hours of operation
  • Model name: LDWS1000G2MC
  • Product type: Handheld microphone transmitter
  • Radio frequency range: 823 - 832 and 863 - 865 MHz
  • Channels: 96 (8 groups of 12 channels)
  • Microphone type: condenser
  • Directional characteristic: cardioid
  • Audio frequency response: 60 Hz - 16 kHz
  • RF output: 10 mW
  • Controls: Power On/Off
  • Indicators: LC display
  • Power supply: 2 x 1.5 V AA
  • Operating time: up to 13 hrs., battery-dependent
  • Length: 252 mm
  • Diameter: 50 mm

EB-193 Wireless PLL Beltpack Transmitter 193 freq 822-846 MHz • PLL synthesised 193 switchable
frequencies.
• Operation in the UHF range
• Compatible for lavalier or headset
microphones
• Powered by AA batteries
• Equipped with 4P mini XLR connector
• LCD Frequency Preparation: PL Synthesized Control
Carrier Frequency Range: 600-960 MHz
RF Output: 10 mW
Stability: ±0.005%
Frequency Deviation: ±48 kHz
LCD Display: Frequency, battery
fuel gauge
Controls: Power On/Off, AF level,
Frequency Up/Down, Lock-on mode
Spurious Rejection: Audio Freq. response: 50 Hz - 16 kHz
Battery: UM3, AA 1.5V x 2 

Weight0.30 kg0.30 kg0.17 kg1.00 kg0.25 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.30 kg
Weight 0.30 kg
Weight 0.17 kg
Weight 1.00 kg
Weight 0.25 kg
Weight 1.00 kg