MIPRO MU-13 Single-sided Earworn Microphone 50Hz 18KHZ

• Proprietary over-the-ear, shapeable frame design for an ultra secure, comfortable fit.
• Supplied in three earworn sizes for ideal fit.
• Fixed or detachable boom can be worn on left or right and detached for replacement or servicing.
• Subminiature 3mm omni-directional condenser capsule.
• Resistant to moisture, perspiration and salts. 
• Detachable cables with various types of plug are available.
• Soft yet flexible thin boom can be bent 120° and boom holder can be height rotated for an ideal fit.
• Ideal for speech applications.

Features:

* Head-worn microphone with continuously adjustable behind-the-neck headband
* External shock mount for high mechanical-noise rejection
* Miniature gooseneck for precise positioning near the user's mouth
* Microphone arm provides choice of left or right-hand use

Specifications:

* Polar pattern: cardioid
* Frequency range: 60 Hz to 20 kHz
* Sensitivity: 5 mV/Pa (-46 dBV)
* Max. SPL: 130 dB/132 dB (for THD = 1 %/3 %)
* Equivalent noise level: 31 dB-A
* Signal/noise ratio (A-weighted): 63 dB
* Impedance: = 2000 ohms
* Power requirement: 9 to 52 V phantom power to DIN 45596 or battery powering from B 29 L, or AKG bodypack transmitter
* Connector: C 520: 3-pin male XLR; C 520 L: 3-pin mini XLR
* Cable: C 520: 3 m (10 ft.); C 520 L: 1.5 m (5 ft.)
* Finish: matte black
* Dimensions: length: 195 mm (7.7 in.) (microphone only); max. diameter: 134 mm (5.3 in.)
* Net weight: 26 g (0.9 oz.)
* Shipping weight: C 520: 380 g (13.4 oz.); C 520 L: 260 g (9.2 oz.)

• Excellent feedback rejection
• Microphone includes a detachable cap as integral wind/popshield
• Individually adjustable to all head sizes
• Neckband design keeps the microphone clear from shirt-collar or clothing
• Twist-proof microphone boom (Ø 2.0 mm), can be attached to the left or right side
• Microphone boom is adjustable in length and angle
• Flexible gooseneck section
• Connection cable can easily be interchanged
• All metal parts coated in a physical vapour deposition process
• Can also be used with the omni-directional HSP 2 boom microphone

• Boom microphone
• Neckband
• Connection cable
• Plastic transport case, foam-lined with cut-outs
• Operating instructions

• Pick-up pattern  cardioid
• Frequency response  40...20 000 Hz
• Nominal impedance  (@ 1 kHz) 1000 Ohm
• Min. terminating impedance  4700 Ohm
• Sensitivity in free field, no load (1kHz)  4 mV/Pa
• Maximum sound pressure level (passiv)  150 dB
• Equivalent noise level  37 dB(A)
• Current consumption  ca. 250 µA
• Operating voltage (stand alone)  4,5-15 V
• Cable length  1,6 m
• Diameter  microphone head 8,4 mm
• Diameter  boomarm 2,4 mm
• Weight  9,2 g (without cable)

ansducer Type
Electret condenser

Polar Pattern
Omnidirectional

Frequency Response
20 to 20,000 Hz

Output Impedance
N / A

Sensitivity (open circuit voltage, @ 1 kHz, typical)
-41 dBV/Pa (9 mV)

Maximum SPL (1 kHz at 1% THD)
2500 Ω load: 107 dB SPL
1000 Ω load: 107 dB SPL

Signal-To-Noise Ratio
60 dB

Dynamic Range @ 1 kHz
2500 Ω load: 73 dB
1000 Ω load: 73 dB

Self-Noise (equivalent SPL, A-weighted, typical)
34 dB

Operating Temperature Range
-18°C (0°F) to 57°C (135°F)

Polarity
Positive pressure on diaphragm produces negative voltage on pin 3 with respect to pin 1

Power Requirements
+5 V DC (130 μA minimum)

Weight
19.76 g

Shure WBH54B Black Headworn Condenser Microphone

WBH54B is a subminiature, electret condenser head worn microphone. It provides uncompromised
sound quality and reliability with minimal visibility in applications such as broadcast, theater, and touring.
Despite their small size, the condenser element delivers full, clear, and natural reproduction of speech
and vocals. The microphone features a durable, low-profile wire frame headband which is fully adjustable for
stability and comfort. A plastic carrying case protects the microphone and its accessories.

Features:

Supercardioid polar pattern provides maximum gain-before-feedback and ambient rejection
Extended frequency response tailored for vocal performances
Able to handle extremely high sound pressure levels (SPL)
Snap-fit foam windscreens stay in place during intensive movement
Available with an in-line preamp or with a TA4F connector for wireless applications
Black finish
TA4F connector for wireless applications

The RØDE HS1 is a discreet and lightweight headset microphone that provides clean, clear and pronounced audio for any application where the microphone needs to be in close proximity to presenter's mouth.

Subtle, ergonomic design including three axes of mechanical adjustment, a malleable, ultra lightweight tube arm and headband, and the choice of either black (HS1-B) or pink (HS1-P) models ensure the perfect fit and function for each individual.

The HS1's light weight, comfortable fit, low self noise, minimal appearance and user friendly omni-directional polar pattern make it an ideal microphone for film, television, video, theatre, house of worship and live vocal performance.

The headset is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance. Integrated cable management on the retainer body and an additional cable management clip minimises visibility, while providing maximum mobility for the wearer.

The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories and tools.

Knowing that versatility is paramount in any product, RØDE has developed the MiConTM connector system which provides seamless integration between the HS1 headset microphone and a wide range of wireless systems as well as consoles, cameras and portable recorders.

Included Accessories

• pop filter,
• clip,
• tool kit,
• anti trauma case,
• mini furry,
• micon cable