Content |
MASS 10
Frequency Response 80Hz – 30kHz
Sensitivity 84dB
System Configuration 2- way Driver complement 1 x 4" C-CAM Bass/Mid-range Driver
1 x 25mm C-CAM® tweeter
with vented loading system
Nominal Impedance 8 ohms
Maximum SPL (each @1M) 104 dBA
Power Handling with amplifier 100 watts
crossover set to 100hz (RMS)
Power Handling (individual) 40 watts
Recommended Amplifier 25-100 watts
Requirements
Recommended High Pass 80-120Hz
Crossover Frequency
Bass Alignment Reflex Rear Ported
Overall Dimensions
(H x W x D) 224 x 128 x 128 mm 813/16 x 51/16 x 51/16 Inches Weight 1.65kg (3lb, 10oz)
|
Itʼs widely understood that the sound of surround TVs cannot compete with the excitement of a properly designed and equalised home theatre system. But great sound comes at the expense of living space…until now. The wall-hugging RX-FX surround speaker reconciles the problem by providing a convincing, enveloping timbre-consistent surround sound that places you on the edge of your seat and at the heart of the action. Discreet enough to be flush-mounted on side or rear walls, the RX-FX design will blend with the system and your décor so completely youʼll wonder why you ever thought of compromise. Itʼs also immensely flexible sonically, offering direct or diffuse sound effects at the flick of a switch. System Format: 2 Way Frequency Response: 60Hz - 35kHz Sensitivity (1W@1M): 89dB Nominal Impedance: 6 Ohms Maximum SPL (dBA): 111.8 Power Handling (RMS): 80W Recommended Amplifier Requirements (RMS): 10-80W Bass Alignment: Sealed Cabinet Tweeter Crossover Frequency: 2.1kHz Drive Unit Complement: 1 x 6" RST® Bass/Mid driver. 2 x 1" (25mm) C-CAM® gold dome tweeters Product External Dimensions: (H x W x D) 250 x 300 x 120 mm (9 13/16 x 11 13/16 x 4 3/4 inch) Individual Weight: 4.69 Kg (10.38 lb) User's Manual Available in colors
|
Small is beautiful. The 686 S2 is the most compact speaker in the series, but don't underestimate its power and precision. That's thanks to a new Decoupled Double Dome tweeter and improved design.
An ideal bookshelf or wall-mounted speaker, the 686 S2 is designed to fit into any space and still sound perfect. Its main driver is a 5-inch bass/midrange unit which benefits from a new 25mm voice coil which makes for a higher sensitivity speaker with bass more suited for placement near a wall.
Bass performance is vital but can often suffer in smaller speakers. Not in the 686 S2, however. That's because a front-firing Flowport, dimpled like a golf ball around the aperture for smoothly regulated airflow, delivers superior bass response without the risk of rattle. Its placement ensures the speaker cabinet is slimmer than predecessors and can be wall mounted without affecting performance.
Like the rest of the range, and despite its smaller size, the 686 S2 also features a Decoupled Double Dome aluminium tweeter for superior high-frequency response. The 686 S2 even features a built-in bracket for easy wall mounting, although this small, versatile and precise speaker sounds great anywhere.
Woven Kevlar | Yes | Crossover Tuning | Yes | Nautilus Tapering Tube | Yes | Flowport | Yes | Technical features | Decoupled Double Dome aluminium tweeter with NautilusTM tube loading
FlowportTM | Description | 2-way vented-box system | Drive units | 1x ø25mm (1 in) aluminium dome high-frequency
1x ø130mm (5 in) woven Kevlar® cone bass/midrange | Frequency range | -6dB at 54Hz and 50kHz | Frequency response | 62Hz - 22kHz ±3dB on reference axis | Dispersion | Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc | Sensitivity | (84)85dB spl (2.83V, 1m) | Harmonic distortion | 2nd and 3rd harmonics (90dB, 1m)
|
| Two Way Bass Reflex Bookshelf Speaker System
Yamaha\'s NS-333 speaker system has been designed specifically for home theater applications. The bookshelf speaker is a bass-reflex design that can be used for main or surround channels and incorporates a 5\' Polymer-Injected Mica Diaphragm (PMD) cone woofer and a 1” aluminum dome tweeter. For improved imaging, the tweeter utilizes Yamaha’s exclusive waveguide horn.
Waveguide Horn
Unlike most homes, movie theaters use sound absorbing materials on walls and ceilings. The result is that the sound reaching your ears is the sound wave produced by the speakers rather than reflected off the walls. Yamaha has created wave guides that greatly reduce reflected sound and increase the proportion of directly generated sound waves reaching your ears. The result is a clear and precise sense of sound direction and placement.
Internally Wired with Monster Cable™
Yamaha has chosen to ensure optimum sound quality by internally wiring some of the components with Monster Cable™. This ensures a clean, clear signal from the crossover network to the speaker driver.
Magnetic Shielding
The speaker is magnetically shielded, so it can be placed on a TV or video monitor without degrading the picture via stray magnetic fields.
Performance Enhanced by a Handsome Cabinet
The EF series speakers are enclosed in an Elliptical Form cabinet with a high gloss black piano finish, which provides solid construction with minimal sound diffraction.
New Grill Design
New grill design and grill cloth provide an attractive and acoustically transparent protective cover for the drivers.
ΝΟΤΕ : The price is valid per piece and not per pair.
Selling Unit: |
Piece |
Type: |
2-Way Bass-Reflex Bookshelf Speaker System |
Featured Technologies: |
- |
Tweeter: |
2,5 cm aluminum dome with Waveguide |
Midrange: |
- |
Woofer: |
13 cm (5\') PMD |
Power: |
150 W/60 W |
Resistance: |
6 ohms |
Frequency Response: |
60 Hz-35 kHz |
Sensitivity: |
87 dB/2.83 V/1 m |
Crossover Frequencies: |
3 kHz |
Auto Standby Operation: |
- |
Filters: |
- |
Remote Control : |
- |
Dimensions (W x H x D): |
200 x 320 x 213 mm |
Weight: |
5,5kg/piece |
|
System Format: 2 Way Frequency Response: 55 Hz - 60 kHz Sensitivity (1W@1M): 86 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 109.8 dBA Power Handling (RMS): 100 W Recommended Amplifier Requirements (RMS): 50 - 100 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: 2.3 kHz Drive Unit Compliment: 1 x 5.5" RST bass/mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 300 x 170 x 263 mm (11 13/16 x 6 11/16 x 10 3/8 inch) Weight (each) Excluding stands: 7.5 Kg (16.5 lbs) AVAILABLE IN SIX COLOR FINISHES
|
Woven Kevlar
Crossover Tuning
Nautilus Tapering Tube
Flowport
Technical features Nautilus™ tube loaded aluminium dome tweeter
Kevlar® brand fibre cone bass/midrange
Flowport™
Description 2-way vented-box system
Drive units 1x ø25mm (1 in) aluminium dome high-frequency
1x ø165mm (6.5 in) woven Kevlar® cone bass/midrange
Frequency range -6dB at 45Hz and 50kHz
Frequency response 52Hz - 22kHz ±3dB on reference axis
Dispersion Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc
Sensitivity 88dB spl (2.83V, 1m)
Harmonic distortion 2nd and 3rd harmonics (90dB, 1m)
|
Reviews
There are no reviews yet.