Content |
The Monitor Audio MR4 has a pair of 6.5" drivers for bass and mid-range and 1" tweeter in a 2 1/2-way system of dedicated driver chambers. Its high quality cabinet is reinforced by comprehensive cabinet bracing to provide a remarkable blend of punch, deep bass extension and control. Overall frequency response is typically flat and this neutral balance is augmented by an extended, well-defined bass performance. The floor-level mounted terminal panel allows for easy access and avoids unnecessary trailing cable lengths.
Amplifier power (watts) | 120 | Bass port? | Front | Connections | 4mm banana plug/binding posts | Drivers | 1 x 6.5" bass
1 x 6.5" bass/mid-range
1 x 1" tweeter | Frequency response (Hz) | 36 - 30,000 | Nominal impedance (ohms) | 6 | Power handling (watts) | 30 - 120 | Sensitivity (dB) | 90 | W x H x D (mm) | 185 x 850 x 255 | Weight (kg) | 12 |
|
System Format: 3 Way
Frequency Response: 35 Hz - 60 kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 114.5 dBA
Power Handling (RMS): 150 W
Recommended Amplifier Requirements (RMS): 100 - 150 W
Bass Alignment: Bass reflex. HiVe port system
Crossover Frequency: L.F - M.F: 400 Hz
M.F - H.F: 2.6 kHz
Drive Unit Compliment: 2 x 5.5" RST bass driver
1 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
External Dimensions excl Stand (H x W x D)
951 x 170 x 300 mm
(37 7/16 x 6 11/16 x 11 13/16 inch)
Weight (each) Excluding stands: 22.2 Kg (48.9 lbs)
|
Dimensions | Metric : 4" D x 4-1/16" W x 19-9/16" H | 10.1 x 10.3 x 49.7 cm
Base Dimensions | Metric :5-1/2" D x 6-1/2" W | 14 x 16.5 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 3-1/2" high definition bass/midrange drivers; Two 3-1/2" pressure coupled bass radiators
A/V Receiver Crossover Setting :120 Hz
Frequency Response :60 Hz – 30 kHz
Inputs :One pair of 5 way binding posts
Impedance :Compatible with 8 Ohms outputs
Enclosure :Aircraft grade extruded aluminum
Sensitivity :89 dB
Available Finishes :Gloss Black
Recommended Associated Amplifier Power :10 – 175 watts
Accessories :Wall bracket; Glass Base
Mounting Options :Vertically Only: On Shelf with included glass base; On wall with included flush mounting bracket
Packaging :One to a carton
Weight | Metric :8 lbs | 3.6 kg
Warranty :5 Years |
Dimensions | Metric :7" W x 11" D x 35" H | 17.8 x 27.9 x 88.9 cm
Driver Complement :Two 1” pure aluminum dome tweeters; Two 5.25” high definition bass/midrange drivers
Frequency Response :25 Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 175 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Inputs :One set of five way binding posts
Accessories :Feet; Isolation Spikes
Weight | Metric :42 lbs | 19.1 kg
Available Finishes :Piano-Gloss Black
Packaging :One to a carton
Warranty :5 Years |
Dimensions | Metric :42" H x 8" W x 12-1/4" D | 106.7 x 20.3 x 31.1 cm
Driver Complement :Two 1" aluminum dome tweeters; Two 6-1/2" high definition bass/midrange drivers
Frequency Response :20Hz - 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 300 watts
A/V Receiver Crossover Setting :Large; Full Bandwidth
Inputs :One set of 5 way binding posts
Available Finishes :Piano-Black Gloss
Accessories :Feet; Isolation Spikes
Packaging :One to a carton
Weight | Metric :57 lbs | 25.9 kg
Warranty :5 Years
|
System Format: 3 Way Frequency Response: 30 Hz - 60 kHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 116.8 dBA Power Handling (RMS): 200 W Recommended Amplifier Requirements (RMS): 100 - 200 W Bass Alignment: Bass reflex. HiVe port system Crossover Frequency: L.F - M.F: 790 Hz M.F - H.F: 2.3 kHz Drive Unit Compliment: 2 x 6.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 1060 x 210 x 330 mm (41 3/4 x 8 1/4 x 13 inch) Weight (each) Excluding stands: 27.2 Kg (59.9 lbs) AVAILABLE IN SIX COLOR FINISHES
|
Reviews
There are no reviews yet.