Content |
Frequency Response
60Hz - 35KHz
Sensitivity
86dB
Nominal Impedance
6 Ohms
Power Handling Single (RMS)
100 Watts
System Power Handling (RMS)
150 Watts
Recommended Amplifier Requirements
40-150 Watts
Maximum SPL (dBA)
106
Bass Alignment
Bass reflex - Rear ported
Driver complement
2 x 4” (100mm) C-CAM® cone bass/mid driver
1 x 1” (25mm) C-CAM gold dome tweeter
Cabinet Dimensions (H x W x D)
125 x 330 x 140mm
(415/16 x 13 x 51/2 Inches)
Cabinet Dimensions (H x W x D)(Inc Grille & Terminals)
125 x 330 x 164mm
(415/16 x 13 x 67/16 Inches)
Weight
3.6kg (7lb 14oz)
|
Tweeter 1¨Silk Dome Dynamic Balance x1
Mid/Woofer 6 ½¨Dynamic Balance Bi-Laminatex2
Frequency Response 48Hz - 25kHz
Nominal Impedance 8 Ohms
Rec. Amplifier Power 20-150 W/Channel
Sensitivity 91dB
Dimensions (cm) 20.32 x 55.88 x 22.86 |
The perfect complement to a full SX-series surround sound speaker set, the Cambridge Audio SX70 is the natural choice. CRISP AND CLEAR SOUND FOR ARTICULATE VOCALS Featuring a silk dome tweeter, the Cambridge Audio SX70 offers a smooth response that\'s essential for clear, accurate dialogue. Even during intense scenes in action movies, the dialogue can still clearly be heard. TWIN WOOFERS FOR BROAD STAGING Using two woofers, placed either side of the tweeter, gives the SX70 a wide soundstage, meaning that it connects up with your front speakers seamlessly. Now, when a jet aircraft rushes across the screen, the sound will follow from left to centre to right without a break. TOP QUALITY CONSTRUCTION FOR LASTING APPEAL Made from dense, MDF (Medium Density Fibreboard) rather than flimsy chipboard, the SX70s are built to last. That solid construction also has a knock-on effect in helping to improve the sound quality through higher cabinet rigidity. Other neat design features that we love include the recessed drive units with hidden fixing bolts, making sure the front the panel looks every bit as smooth as the sound. PART OF THE SX-SERIES AND SO IDEAL FOR SURROUND SOUND SYSTEMS With floorstanding and standmount sound speakers available, the Cambridge Audio SX70 is ideal as part of a surround sound speaker system. With a similar sonic balance to the other SX-series speakers you get a smooth, uniform sound right the way around your room for a totally enveloping sound.
Magnetically Shielded |
Are they magnetically shielded? Allows speaker to be placed near a CRT TV/Monitor or sensitive magnetically stored data without the risk of damage. |
|
Sensitivity (dB) |
The higher this figure is the easier the speaker is to drive and, hence, requires a less powerful amplifier |
85 |
Impedance (ohms) |
Resistance. A standard figure is 8ohms |
8 |
Bi-wireable |
Is it bi-wirable? Separate earthing cables for tweeter and woofer units - gives a more precise sound when used with bi-wire cable |
|
Power Rating (Watts) |
Maximum power output long term/short term (RMS) |
100 |
Dimensions |
Dimensions of speaker cabinet (W x D x H) in mm |
360w x 246d x 138h |
Weight |
Weight of speaker, unboxed, in KG |
4 |
Black |
Does the speaker come in a black finish? |
|
Wood |
Does the speaker come in a wood or wood style finish? |
|
Other Colour |
Does the speaker come in another coloured finish? |
|
Freq Response (Hz) |
The lower the first figure the deeper the bass should be |
65 - 20,000 |
Speaker Enclosure Type |
Type of speaker enclosure. Infinite baffle cabinets are sealed and so are often less fussy about placement. Usually they do require a little more power to drive, though. Bass reflex speakers are usually more efficient than infinite baffle designs but may require more care in terms of placement. Rear port designs, in particular, usually need at least 15-30cm (6 - 12 inches) between them and the wall behind, for a balanced bass response. ABR = Auxcillary Bass Radiator (looks like a standard bass cone but without power) |
Infinite baffle (sealed) |
|
HF Unit: 25mm neodymium tweeter with high dispersion diaphragm. Ferrofluid cooled and damped. Magnetically shielded. Exclusively Profiled.
MF Unit: 110mm mid range driver with 32mm long-throw voice coil, die cast chassis, high power, magnet system and lightweight alloy cone. Magnetically shielded.
LF Unit: 110mm mid/bass driver with 32mm long-throw voice coil, die cast chassis, high power, magnet system and lightweight alloy cone. Magnetically shielded.
Power Handling: 150 watt max
Overall Frequency Response: 55Hz – 23kHz
Sensitivity: 90dB
Impedance: 8 ohms
Cabinet: Real wood veneered. 15mm MDF wrap. Dual chamber. High power, back firing, low turbulence bass reflex port. 22mm front baffle
Terminals: Gold-plated 4-way binding posts
Dimensions: WxHxD 450 x 180 x 297 mm
Weight: (exc packaging) 8kg each
|
System Format: 3 Way Frequency Response: 40 Hz - 60 kHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 8 ohms Maximum S.P.L (Per pair in room): 113.8 dBA Power Handling (RMS): 200 W Recommended Amplifier Requirements (RMS): 100 - 200 W Bass Alignment: Sealed Cabinet Crossover Frequency: L.F - M.F: 800 Hz M.F - H.F: 2.3 kHz Drive Unit Compliment: 2 x 6.5" RST bass/mid-range driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 254 x 581 x 333 mm (10 x 22 7/8 x 13 1/8 inch) Weight (each) Excluding stands: 18.9 Kg (41.6lbs) AVAILABLE IN SIX COLOR FINISHES
|
Specifications Recommended Usage | Center Speaker | Type | 2-Way Accoustic Suspension Design | Woofers | Dual 5" PMD Cone | Tweeters | 1" Aluminum Dome With Waveguide Horn | Magnetic Shielding | Yes | Frequency Response | 55 Hz - 35 kHz | Sensitivity | 89 dB/2.83 V/1 m | Input Power (Maximum / Nominal) | 250W / 100W | Impedance | 6 Ohms | Product Dimensions (W x H x D) | 20-1/4" x 7-1/2" x 8-3/8“ | Product Weight (lbs.) | 7.3 Kg
|
---|
|
Reviews
There are no reviews yet.