ART MyMONITOR PERSONAL HEADPHONE MONITOR MIXER

108.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
MyMONITOR – Personal Headphone Monitor Mixer Overview Problem: A performer needs to hear him/herself through headphones exclusively or mixed with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the mic signal, however, should be going to the main mixer. Solution: Connect MyMONITOR between the mic and line […]

 

Read more

MyMONITOR – Personal Headphone Monitor Mixer Overview

Problem: A performer needs to hear him/herself through headphones exclusively or mixed
with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the
mic signal, however, should be going to the main mixer.
Solution: Connect MyMONITOR between the mic and line source, and the mixer. The Mic
and line Monitor levels can then be adjusted for mix and volume through the headphones.
Only the mic signal will go to the board. And since MyMONITOR can be AC or battery powered,
the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or
condenser mics can be used since phantom power would come through the Mic Thru jack from
the mixer or other source.

MyMONITOR – Personal Headphone Monitor Mixer Specifications:

Signal To Noise Ratio 90dB
Gain 15dB (1/4 in), 50dB (XLR)
Maximum Input Level -20dB mic, 40dB Monitor
Output Impedance 10 ohms
Power Requirements 12V DC (Adapter included) or one 9V battery
Phantom Power ON/OFF switch
Power LED indicator
Dimensions 4.5×2.75×1.5 inches (112mm x 72mm x 40mm)
Weight 1.3lb (590g)

Weight 0.59 kg

Reviews

There are no reviews yet.

Be the first to review “ART MyMONITOR PERSONAL HEADPHONE MONITOR MIXER”

Your email address will not be published. Required fields are marked *

Quick Comparison

ART MyMONITOR PERSONAL HEADPHONE MONITOR MIXER removeLD SYSTEMS HPA 4 Compact HEADPHONE AMPLIFIER 4 CHANNELS removeKRAMER VM-50H 1:5 Stereo Headphone Distribution Amplifier removeVOX AMPLUG NIGHT TRAIN Guitar Headphone Amp removeVOX AMPLUG JOE SATRIANI Guitar Headphone Amp removePRESONUS HP-4 FOUR CHANNEL HEADPHONE DISTRIBUTION AMPLIFIER remove
NameART MyMONITOR PERSONAL HEADPHONE MONITOR MIXER removeLD SYSTEMS HPA 4 Compact HEADPHONE AMPLIFIER 4 CHANNELS removeKRAMER VM-50H 1:5 Stereo Headphone Distribution Amplifier removeVOX AMPLUG NIGHT TRAIN Guitar Headphone Amp removeVOX AMPLUG JOE SATRIANI Guitar Headphone Amp removePRESONUS HP-4 FOUR CHANNEL HEADPHONE DISTRIBUTION AMPLIFIER remove
Image
SKUAT/EM/000035LDHPA4VM-50HVOX AMPLUG NIGHT TRAINVOX AMPLUG JOE SATRIANIHP4 EU
Rating
Price 108.00 incl. GR VAT 47.85 incl. GR VAT 264.66 incl. GR VAT 30.51 incl. GR VAT 36.00 incl. GR VAT 138.87 incl. GR VAT
Stock

Available on backorder

In stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderIn stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

MyMONITOR - Personal Headphone Monitor Mixer Overview

Problem: A performer needs to hear him/herself through headphones exclusively or mixed
with the output of a mixer, CD player, tape deck, or other stereo line level source. Only the
mic signal, however, should be going to the main mixer.
Solution: Connect MyMONITOR between the mic and line source, and the mixer. The Mic
and line Monitor levels can then be adjusted for mix and volume through the headphones.
Only the mic signal will go to the board. And since MyMONITOR can be AC or battery powered,
the unit can be used on a large stage or wherever there is no AC outlet nearby. Dynamic or
condenser mics can be used since phantom power would come through the Mic Thru jack from
the mixer or other source.

MyMONITOR - Personal Headphone Monitor Mixer Specifications:

Signal To Noise Ratio 90dB
Gain 15dB (1/4 in), 50dB (XLR)
Maximum Input Level -20dB mic, 40dB Monitor
Output Impedance 10 ohms
Power Requirements 12V DC (Adapter included) or one 9V battery
Phantom Power ON/OFF switch
Power LED indicator
Dimensions 4.5x2.75x1.5 inches (112mm x 72mm x 40mm)
Weight 1.3lb (590g)

LD Sytems HPA 4 - a compact and powerful headphone amplifier The LDHPA4 has small dimensions, can handle up to 4 headphones and has an output power with no equal in its class. That means high volume with no distortion. With these features the LDHPA4 is an essential tool for every project- and home studio. Specifications Product type Headphone Amp:
Inputs 2
Input connectors 6.3 mm TRS , RCA
Input impedance 1 k Ohm(s)
Outputs 2
Output connectors 6.3 mm Jack
Power output 4 x 100 mW
Minimum connected impedance 10 Ohm(s)
Frequency response 20 - 20.000 Hz
Controls 4 x headphone volume , Mono/stereo switch
Indicators Power
Operating voltage External Power Supply
Operating voltage 24 V DC
Cabinet material metal
Cabinet surface painted
Width 94 mm
Height 48 mm
Depth 82 mm
Weight 0,27 kg
Accessories (included) power supply

INPUT:    1 audio stereo, 1Vpp/50kΩ on a 6.5mm stereo phone socket.
OUTPUTS:    5 audio stereo, 500mW/8Ω on 6.5mm stereo phone sockets.
AUDIO BANDWIDTH (-3dB):    25kHz.
CONTROL:    5 stereo output level controls (front), 1 mono switch (rear).
GAIN RANGE:    -60dB to +10dB.
S/N RATIO:    78dB.
THD:    0.08% @100mW.
POWER SOURCE:    12V DC, 370mA nom, 1A max.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.72” x 1.77”) W, D, H.
WEIGHT:    0.68kg (1.5lbs) approx.
ACCESSORIES:    12V DC power supply.
OPTIONS:    RK-1 19" rack adapter.

The amPlug Night Train perfectly simulates the high-gain sound of the compact VOX Night Train tube amp. Just as with the actual Night Train head, you can switch between the two preamp sounds. The BRIGHT position boosts the high-frequency range; the THICK position offers a chunkier, heavier sound. The emulated speaker cabinet circuit accurately recreates the sound of the Night Train amp being played through the matching V112NT single 12" Night Train speaker cabinet. As a finishing touch, amPlug Night Train share some of the cool looks of its namesake amplifier.

Specifications
  • Controls: Gain, Tone, Volume; STANDBY/ON/FX switch
  • Terminals: PHONES Jack (stereo), AUX In Jack (stereo)
  • Power supply: AAA batteries (x 2)
  • Battery life: amPlug Night Train:
  • With zinc-carbon batteries: approximately 9 hours
  • With alkaline batteries: approximately 24 hours
  • Dimensions (W x D x H): 86 x 80 x 31mm/3.39" x 3.15" x 1.22“
  • Weight: 40 g/1.41 oz. (not including batteries)
  • Included items: AAA batteries (X2) (for verifying operation)

 

Plug In, Rock Out with the Joe Satriani amPlug headphone amp

The Joe Satriani signature model is the latest addition to our incredibly popular amPlug series of headphone guitar amps!

  • Joe's signature lead tone with your choice of delay on or off
  • Distortion tone with superb dynamic response, inspired by the Satchurator
  • Analog-style delay with Joe's filter & EQ, inherited from the Time Machine
  • Plugs straight into your electric guitar, so you can instantly enjoy great sound through your headphones
  • Convenient and portable with up to 11 hours of battery operation
  • AUX input jack lets you jam along to tunes on your CD/MP3 player

The amPlug series of palm-sized headphone guitar amps make it easy to enjoy great guitar/bass sounds at home, in your room, or anywhere. This lineup is now joined by the amPlug Joe Satriani signature model, which borrows freely from the VOX/Joe Satriani line of signature pedal effects.

Specifications
  • Power supply: AAA batteries (x 2)

  • Battery life (FX on):
    Zinc-carbon batteries: approximately 3 hours
    Alkaline batteries: approximately 11 hours

  • Dimensions (W x D x H): 86 x 80 x 31mm/3.39" x 3.15" x 1.22"

  • Weight: 40 g/1.41 oz. (not including batteries)

  • Included items: Two AAA batteries (for verifying operation)

 

The new HP4 from PreSonus answers the need for a headphone distribution amplifier with professional specifications in a small package at an affordable price. The HP4 features four discrete headphone outputs on the front panel each with its own volume potentiometer and 150mW of amplification per channel. The HP4 also features adjustment over control room monitors with a separate volume control, monitor mute switch and mono switch giving you an extremely powerful monitoring solution at an amazingly low price. Features ? Four High Power Headphone Outputs ? Ultra loud (150mW per channel) ? Ultra quiet operation ? Musical Wide Dynamic Range ? Control Room Monitor Outputs with Level Control ? Mono or Stereo Operation ? Monitor Mute Switch ? Daisy Chain an Infinite Number of Units ? Compact package Technical Specifications Input TRS Impedance 10K Ohms Panel Controls Headphone Level 1 to 12 Monitor / Feed Output -80dB to +10dB Mono Switch Monitor / Feed Mute Power Supply Type Linear Input 16VAC/1000mA Output TRS Balanced 51 Ohms Impedance Performance THD+Noise (Unweighted) 0.002% Noise Floor  -98dB Signal To Noise >95dB Power Supply Rejection >98dB Power 16 Watts Physical Weight  5lbs./ 2.3 kg. Dimensions 5.5 x 5.5 x 1.75 Mounting Max Rack and Universal Rack Tray Chassis Steel Panel Brushed Aluminum Sides Cast Aluminum
Weight0.59 kg0.50 kg0.68 kg0.40 kg0.40 kg2.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.59 kg
Weight 0.50 kg
Weight 0.68 kg
Weight 0.40 kg
Weight 0.40 kg
Weight 2.00 kg

Recently Viewed Products