NEUTRIK NBB75DSGB BNC

10.03 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
BNC Bulkhead Chassis Connectors. Based on a new production technology, the machined brass connector body provides and extremely rugged and non-abrasive connection over long term use. They are an ideal combination when used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable connectors. Available in isolated or grounded versions, in “D” shaped […]

 

Read more

BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in “D” shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.

? Connector Type: BNC Grounded Chassis w/Solder Tabs ? Housing: “D” Series
? Shell Color: Black

Weight 0.04 kg

Reviews

There are no reviews yet.

Be the first to review “NEUTRIK NBB75DSGB BNC”

Your email address will not be published. Required fields are marked *

Quick Comparison

NEUTRIK NBB75DSGB BNC removeADAM HALL CONNECTORS 4 STAR C CAT 5 RJ45 Cat.5e connector removeNEUTRIK NBNC75BLP9 BNC REAR TWIST CABLE CONNECTOR 4K 8K removeNEUTRIK NE8MCB1 Ethercon RJ45 carrier removeNEUTRIK NBB75DSG BNC removeNEUTRIK NE8FAV-Y110 ETHERCON RJ45 RECEPTACLE IDC 110 remove
NameNEUTRIK NBB75DSGB BNC removeADAM HALL CONNECTORS 4 STAR C CAT 5 RJ45 Cat.5e connector removeNEUTRIK NBNC75BLP9 BNC REAR TWIST CABLE CONNECTOR 4K 8K removeNEUTRIK NE8MCB1 Ethercon RJ45 carrier removeNEUTRIK NBB75DSG BNC removeNEUTRIK NE8FAV-Y110 ETHERCON RJ45 RECEPTACLE IDC 110 remove
ImageRJ45 1 CONNECTORnbnc75bpl9x neutrik bnc uhd coaxial 4k 8k
SKUNBB75DSGBK4CCAT5NBNC75BLP9XNE8MCB1NBB75DSGNE8FAV-Y110
Rating
Price 10.03 incl. GR VAT 2.29 incl. GR VAT 4.08 incl. GR VAT 5.29 incl. GR VAT 10.03 incl. GR VAT 8.08 incl. GR VAT
Stock

Available on backorder

In stock (can be backordered)

In stock (can be backordered)

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderIn stock (can be backordered)In stock (can be backordered)Available on backorderAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Standard Cat.5e RJ45 connector from our 4 Star Series
  • With screwable grommet and lockable protective housing
  • Completely shielded against electrical interference
  • For cable diameters from 5 - 6.8 mm
  • Optimized contact pin and insulator design for UHD-data transmissions
  • Proven rearTWIST technology
  • Swiss antraloy plating
  • Fully compatible with conventional BNC chassis connectors
  • Improved return loss values at high frequencies
Content

BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in "D" shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.

? Connector Type: BNC Grounded Chassis w/Solder Tabs ? Housing: "D" Series
? Shell Color: Black

Adam Hall Connectors 4 STAR C CAT 5

Network plug | Cat.5e

  • Standard Cat.5e RJ45 connector from our 4 Star Series
  • With screwable grommet and lockable protective housing
  • Completely shielded against electrical interference
  • For cable diameters from 5 - 6.8 mm
Product type
Plugs and Connectors
Type
Other Plugs and Connectors
Color
Black
Housing
Plastic
Diameter
6.6 mm
Weight
0,0125 kg
The rearTWIST UHD BNC connectors are specifically designed for high resolution video signal transmissions. Due to the unique insulator and contact pin design, the connectors feature low return loss values for 4K and 8K signals.

Optimized Return Loss

Due to optimized insulator design and reduced crimp diameter from center pin the Neutrik rearTWIST UHD BNC connector achieves increased headroom compared to conventional BNC connectors and offers additional return loss reserve for potential impedance deviations resulting from cable bending, incorrect connector assembly or faulty connection interfaces without signal interruption.
Rear Twist BNC Cable Connector

Crimp Dimensions

In order to achieve optimum return loss values at high frequencies the crimp dimension of the contact pin has been reduced.
Pin: 1.07 mm
Shield: 6.47 mm
Crimp die: DIE-R-BNCX-PDG

Approved Cables

To guarantee high performance for each cable-connector combination at high frequencies Neutrik measured common COAX cables which are specifically designed for ultra high definition transmission (UHD). Find all approved cables listed below. Suitable cables: Argosy Image 720, CAE HD08370LSZH, Canford SDV-I-X-LFH, Clark Wire CD7559F, CommScope 5565, Draka 0.8/3.7 AF, Draka 755-801, Draka 755-803, Draka 755-804, Gepco VPM2000, Proel HPC 810, Suhner S0426, Sommer 600-0451, Sommer 600-162(F), Percon VK6 UHD optimized cables: Belden 1505A, Belden 1505ANH, Belden 1505DNH, Belden 4505R, Belden 70081, Belden 70081NH, Belden 70081CH, Bryant SD50F, Canare L-4CFB, Clark CD7559, DirectCable 301-299 Evolution XPC, Draka Highflex 0.8L/3.7Dz, Draka HD Pro 0.8/3.7 AF, Klotz VD083SH, Klotz V08/37H, Sommer vector 0.8/3.7
Title NBNC75BLP9X
Connection Type BNC 75 Ω
Gender male
Electrical
Contact resistance ≤ 3 mΩ (inner)
Contact resistance ≤ 2 mΩ (outer)
Dielectric strength 1.5 kVdc
Impedance 75 Ω
Insulation resistance > 5 GΩ
Rated voltage < 50 V
VSWR ≤1.06 / >30 dB up to 6 GHz ≤1.13 / >24 dB up to 12 GHz ≤1.22 / >20 dB up to 18 Ghz
Mechanical
Cable O.D. 6.3 mm
Cable retention > 30 N (center)
Crimp size 6.47 Hex crimp (shield)
Crimp size (pin) 1.07 crimp
Insertion force < 25 N
Lifetime > 1000 mating cycles
Wiresize
Locking device Bayonett
Cable anchoring Jacket crimping
Material
Contacts Brass (CuZn35Pb2), 0.2 µm AuCo (center contact)
Shell Brass (CuZn39Pb3)
Shell plating Antraloy
Insert PP
Environmental
Temperature range -30 °C to +85 °C
Contact crimpability Complies with IEC 60803 and IEC 60352-2
Neutrik E8 MC-B-1
Cable Connector Carrier black water-protected IP54

The connector carrier consists of a black chrome shell, fixing disk, chuck, brush, and boot. The boot (identical with the XLR X series) is suitable for cable diameters of 3.5 - 8 mm. For bulk cable. RJ45 plug not included.

The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust, lockable solution.The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.

Product type Plugs and Connectors
Type Other Plugs and Connectors
Gender male
Temperature range -30 to 80 °C
Cable diameter max. 8 mm
Housing die-cast zinc
Weight 0,03 kg

BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in "D" shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.

? Connector Type: BNC Grounded Chassis w/Solder Tabs ? Housing: "D" Series
? Shell Color: Nickel

EtherCon? ruggedized RJ45 connectors provide solutions for data transfer
in harsh demanding environments by offering a cable carrier and receptacle
that helps to protect the contacts of the RJ45 connections. Designed to
protect the fragile latch and cover of standard RJ45 connectors from breakage,
you will find uses for this connector system in Ethernet networking of audio,
commercial, entertainment, stage production, DMX lighting, industrial and
outdoor Internet access applications.

The Ethercon series offers both male cable carriers and assembled female
receptacles. The cable end offers a robust diecast shell as a carrier for pre-
assembled RJ45 plugs. Female chassis connectors are based on the current
Neutrik "A" series as well the "D" series of XLR receptacles with secure latching
system - a feature not found on other RJ45 receptacles. Termination is offered
in both IDC Krone and IDC 110 punch down terminals. Neutrik Ethercon products
comply with Category 5 shielded or unshielded and are compatible for use with
10 Base-T and 100 Base-TX systems. ? Connector type: Receptacle, IDC 110
terminals, "A" style ? Mfg. #NE8FAV-Y110

Weight0.04 kg0.0125 kg0.1 kg0.05 kg0.04 kg0.05 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.04 kg
Weight 0.0125 kg
Weight 0.1 kg
Weight 0.05 kg
Weight 0.04 kg
Weight 0.05 kg