NOVATION PEAK Analog Module Synthesizer

Peak sounds warm and rich with filthy, biting overdrive. It’s an eight-voice desktop polyphonic synthesiser with three New Oxford Oscillators for each voice. The synth has a resonant multi-mode analogue filter for each voice, and three distortion points in an analogue signal chain.

Tech Spec Product Hardware Specifications

• 42 Control knobs
• 8 35mm Sliders
• 1 Volume knob
• 2 Data encoders
• Rubberised knob caps with spun metal discs
• 30 Function buttons (not lit)
• 16 Function buttons (lit)
• 2 Animate buttons plus hold button
• 90 Indicator LEDs
• OLED display
• Kensington Security Slot
• Power switch
• Power supply connector
• USB socket for system / MIDI comms only (no bus-power)
• MIDI In / Out / Thru
• 2 1/4" jack socket for continuous or switched pedals
• 3.5mm jack socket for CV in
• 1/4" jack sockets for left and right outputs
• 1/4" jack socket for headphone output
• Metal chassis with American walnut wooden end cheeks
• Metal magnetic inset end pieces

• 8 voice polyphonic (voice modes available unison etc.)
• Mono-Timbral
• 5 Voice Modes - Mono, MonoLG, Mono2, Poly, Poly2

• 3 oscillators
• 1 noise generator
• 1 ring modulator
• 2 LFOs
• 1 Amp envelope and 2 mod envelopes
• 1 Filter

• Sine, tri, sawtooth, square / pulse plus 17 wavetables of 5 waveforms per row

• 1x State variable OTA filter per voice
• 12/24dB slope
• Low-pass / band-pass / high-pass
• Pre-filter overdrive
• Post-filter distortion

• 16 modulation slots per patch
• Each slot has 2 sources to 1 destination

• Direct (depth)
• Modulation wheel
• Aftertouch (polyphonic and channel AT)
• Expression pedal 1
• Expression pedal 2
• Keyboard velocity
• LFO1 positive
• LFO1 bi-polar
• LFO2 positive
• LFO2 bi-polar
• Amp envelope
• Mod envelope 1
• Mod envelope 2
• Animate 1
• Animate 2
• CV mod input bi-polar

• Oscillator 1-3 frequency, v-sync level, shape amount and level
• Noise source level
• Ring modulator output level
• Overal synth output level
• Filter drive, distortion, cut-off frequency and resonance
• LFO 1 and 2 frequency
• Amp env / mod env 1 / mod env 2 attack, decay and release
• FM Osc 1 -> osc 2, osc 2 -> osc 3, osc 3 -> osc 1 and noise -> osc 1
• Osc 3 -> filter cutoff frequency
• Noise -> filter cutoff frequency

• Analogue distortion
• Chorus - 3 types
• Delay with 16 types of delay sync, LP and HP damping, slew and stereo
• Reverb - 3 types

• Arpeggiator w/ key latch – 33 patterns
• Patch storage - up to 512 on hardware (ships with 256 factory patches)
• Glide
• All knobs (excl. volume), sliders and most buttons transmit and receive MIDI cc commands for external control and mapping

• Ableton Live Lite 9 is included
• Peak is a USB-MIDI class compliant device

• Maximum power consumption 12V DC 1A

• 233mm (9.17“) width x 464mm (18.27“) depth x 70.5mm (2.78“) height

OS compatibilty not relevant for this product range/type

Highlights:

• Even more vintage sounds, including the KORG SGproX piano, M1 and VOX organs and well-known "Tape" instruments
  
• 128 onboard sounds, plus 640 additional sounds included with the Editor/Librarian for Mac and PC!
  
• New yet nostalgic - black panel "new vintage" design
  
• Featuring MMT - the distillation of Korg's analog modeling technology
  
• Vocoder with included gooseneck microphone
  
• A powerful Kaoss effects engine - the kind of effects that you would expect from Korg
  
• Korg's proprietary Natural Touch mini-keyboard, designed with an emphasis on playability
  
• Battery powered operation is supported for increased portability

Tone Generator System:

MMT (Multiple Modeling Technology)

Multi Timbral:

Maximum 2 (when using Layer, Split, or Multi)

Voice polyphony:

Maximum 8 voices (when using Vocoder, it is 4 voices)
Structure:

[Synth] 2 oscillators + noise generator

Oscillator 1:

Waveform: 8 types (Sawtooth, Pulse, Triangle, Sine, Formant, Noise, DWGS, Audio In),

Modulation: Waveform, Cross, Unison, VPM 

Oscillator 2:

Waveform: 4 types (Sawtooth, Pulse, Triangle, Sine)

Modulation: Ring, Sync, Ring+Sync

Waveshape:

Type: Drive, Decimator, HardClip, OctSaw, MultiTri, MultiSin, SubOSCSaw, SubOSCSqu, SubOSCTri, SubOSCSin, LevelBoost,

Multimode Filters:

Filter 1: -24 dB/oct LPF ~ -12 dB/oct LPF ~ -12 dB/oct BPF ~ -12 dB/oct HPF ~ Thru,

Filter 2: LPF, HPF, BPF (swichable)

[Vocoder]

16 channel vocoder, adjustable level and pan for each channel, Formant Shift function, Formant Hold function

Keyboard:

37 notes (Natural Touch mini-keyboard, velocity sensitive)

Controller:

Pitch bend wheel

Modulation Wheel
Effects:

Timbre: 2 band EQ

Master effect: 2 units, 17effect algorisms.
Arpeggiator:

Six types: UP, DOWN, ALT1/2, Random, Trigger, Individual step on/off function
Programs:

128 programs (A/B banks x 8 genres x 8 category)

Inputs:

[AUDIO INPUT 1] (1/4" phone jack, unbalanced, with MIC/LINE switch) - Rear Panel
[AUDIO INPUT 1 (MIC)] (XLR jack / balanced) - Front Panel

Outputs:

[L/MONO, R] (1/4" Standard phone jacks / unbalanced)
[Phone] (1/4" Stereo Standard phone jacks)

MIDI:

IN, OUT
USB:

Type B
Display:

Custom LCD
Power Supply:

DC 9 V (AC adapter), or six AA alkaline batteries (sold separately)

Battery Life:

Approx. four hours (with alkaline batteries)
Dimensions:

556(W)x231(D)x73(H)mm/21.89“(W)x9.09“(D)x2.87“(H)

Weight:

2.0 kg/4.41 lbs. (without batteries and included microphone)
Accessories:

AC adapter, Gooseneck Microphone

Optional accessories:

Soft Case: SC-micro MSG

Mobile Monitor Amplifier : MMA-130(It provides a DC9V output jack that can provide power to one of a number of Korg instruments like microKORG XL+)

MicroKorg XL+ Sound Editor

Operating requirements
Windows

Supported Computer:

A computer that satisfies the operating requirements of Microsoft Windows XP/Vista/7 and is equipped with a USB port

Operating system:

Microsoft Windows XP SP3 (32 bit), Windows Vista SP2 (32bit, 64bit), Windows 7 SP1 (32bit, 64bit)

Mac
Supported Computer:

An Apple Macintosh computer that satisfies the operating requirements of Mac OS X and is equipped with a USB port and an Intel or Power PC processor

Operating system:

Intuitive and ultra-powerful volca sequencer
A fun to use sequencer with superb improvisatory potential

The step sequencer is designed for ease of editing and to allow parts to be inserted or removed "on the fly." Use the 16 step keys to enter notes intuitively while maintaining visual confirmation of the timing of the notes in a measure. You can also record your performance in real time.
Up to ten of the sequence patterns you create can be stored in internal memory.
Motion sequencer records and plays back up to 11 parameters

The motion sequence function records your knob movements, letting you add time-varying change to the sound. This is a great way to polish your loops, and also lets you generate highly original live performances. The volca sample is able to record all knob movements that are related to sound editing. This allows sophisticated editing that had been impossible for hardware samplers of this category.

Parameters that can be used with Motion Sequence
・ Start Point (Playback start location)
・ Length (Playback length)
・ Hi Cut (Cutoff frequency)
・ Speed (Playback speed)
・ Pitch EG Int (Pitch EG depth)
・ Pitch EG Attack (Pitch EG attack time)
・ Pitch EG Decay (Pitch EG Decay time)
・ Amp Level
・ Pan
・ Amp EG Attack (Amp EG Attack time)
・ Amp EG Decay (Amp EG Decay time)

Keyboard

　
    Multi touch Keyboard

Sampler

Type
    PCM

Maximum Polyphony
    8

Number of Samples
    100 (User over writable)

Memory Size for Sample
    4 MB, Maximum 65 seconds

Sampling Frequency
    31.25 kHZ, 16 bit

Edit
    Sample(Start Point, Length, Hi Cut), Pitch(Speed, EG Int, Attack,Decay), Amp(Level, Pan, Attack, Decay), Reverse On/Off

Effects

Digital Reverb
    On/Off, Mix

Analogue Isolator
    Bass, Treble

Sequencer

Number of Parts
    10

Number of Steps
    16

Number of Recording Patterns
    10

Control
    Motion Sequence, Active Step, Step Jump, Swing

Song

Maximum Number of Sequence
    16

Number of Recording Songs
    6

Connectors

Audio Output
    Headphones (3.5mm stereo mini jack)

Sync
    Sync In (3.5mm monaural mini jack, Maximum input level: 20V)
    Sync Out(3.5mm monaural mini jack, Maximum Output level: 5V)

MIDI
    MIDI IN

Power

Battery Life
    Approximately 10 hours (using alkaline batteries)

Power Supply
    AA alkaline battery × 6 or AA nickel-metal hydride battery × 6 Or AC adapter (DC 9V) (optional)　

Others

Accessories
    AA alkaline battery ×6 (for verifying operation), Cable  

Options
    AC adapter (DC 9V)

Dimensions
(W x D x H)
    193 × 115 ×45 mm / 7.60” x 4.53” x 1.77”

Weight
    372 g / 13.12 oz. (Excluding batteries)

• 4-operator FM Sound Engine offers dynamic and expressive additive synthesis
• A new feature of this engine is continuously variable feedback on every operator allowing for a wide-range of sound creation
• Two programmable effects blocks with seven effect types per block:
• The effect types are: VCM Touch Wah, VCM Flanger, VCM Phaser, Chorus, Delay, Reverb and Distortion
• Multi-touch control interface gives direct access to four simultaneous parameters
• 32 Voice memory locations allow storing and recalling favorite Voices

MX49 is a 49 key music synthesizer which combines Motif XS sounds, USB Audio/MIDI connectivity and advanced DAW/VST controller features at a ground breaking level of affordability.

The new MX series combines Motif XS sounds, USB Audio/MIDI connectivity and advanced DAW/VST controller
features at a ground breaking level of affordability.
- Over 1000 sounds from the MOTIF series
- Equipped with VCM effects
- Easy Split /Layer Performance Mode for Instant Inspiration
- 16-Part Multi timbral and 128-note polyphony
- Extensive Hands-On controls for VSTs and DAWs
- Bi-directional USB Audio/MID interfacing
- A complete suite of music production software included
- A lightweight design with a quality Yamaha keyboard
- Complete analog and digital connectivity

The MX series contains more than 1000 Voices derived directly from the world famous Yamaha MOTIF XS series. From realistic acoustic sounds like piano, electric piano, strings and drums to complex 8-element synth sounds, the MX has all of your favorite Motif XS Voices right at your fingertips. The MX even has a streamlined interface for instant hands-on selection of all those great Voices. The newly designed category selection makes it easier than ever to find the Voice you need. You can even edit and store your own sounds right onboard.

MX synthesizers come equipped with VCM effects, which simulate vintage effectors at the circuit level. The　sounds of the ʽ70s are brought back to life, through simulating the hard-to-find vintage sounds of equalizer, flanger, phaser, and wah effects introduced by the keyboard legends of the era.

Performance Mode on the Motifs has always been the place to find instant inspiration and the MX is no different. You can easily combine two Voices to play on the keyboard using the dedicated Split and Layer buttons each with their own intelligent arpeggiator and a dedicated Part for a drum track to create evocative Performances that feel like a whole band is playing. The 128 Performances on the MX are all user editable, but come programmed with the latest club friendly grooves.