Content | THE CARL COX SIGNATURE MODEL, OPTIMIZED FOR DANCE MUSIC DJ PERFORMANCE.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 32dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: club and mobile DJs, high output |
Features
• 1 System
• 1 Replacement Stylus
• Small brush
• Inside a velvet-case
Technical Data
Output voltage at 1000 Hz: 5cm/sec. 7,5 mV
Frequency response: 20-15.000 Hz +3 / -2 dB
Stylus type: Spherical
Tracking force range: 3,0-5,0 g (30-50 mN)
Tracking force, recommended: 4,0 g (40 mN)
Cartridge weight: 5 g |
Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.
Output voltage at 1000Hz, 5cm/sec.
|
11 mV
|
Channel balance at 1kHz
|
1,5 dB
|
Channel separation at 1kHz
|
22 dB
|
Channel separation at 15 kHz
| -
|
Frequency range at -3dB
|
20-18.000 Hz
|
Frequency response
|
20-18.000 Hz - 3 dB
|
Tracking ability at 315 Hz at recommmende tracking force
|
90 μm
|
Compliance, dynamic lateral
|
12 μm/m N
|
Stylus type
|
Spherical
|
Stylus tip radius
|
R 18 μm
|
Tracking force range
|
3,0 g (30 mN)
|
Tracking force recommended
|
4,0 g (40 mN)
|
Tracking angle
|
20°
|
Internal impedance, DC resistance
|
1.680 Ohm
|
Internal inductance
|
920 mH
|
Recommended load resistance
|
47 kOhm
|
Recommended load capacitance
|
200-400 pF
|
Cartridge weight
|
5 g
|
Replacement stylus unit
| Q.Bert |
|
Ortofon D 25 M Mono Cartridge Spherical Diamond
OM D 25 M Technical Data:
Output voltage at 1000 Hz, 5cm/sec.: 4 mV, Lateral (mono)
Channel balance at 1 kHz
Channel separation at 1 kHz
Channel separation at 15 kHz
Frequency range: 20-20.000 Hz
Frequency response: 20-18.000 Hz +3 / - 2 dB
FIM distortion at recommended tracking force, DIN 45.542:
Tracking ability at 315Hz at recommended tracking force: > 70 µm
Compliance, dynamic, lateral: 7 µm / mN
Stylus type: Spherical
Stylus tip radius: R 25 µm
Equivalent stylus tip mass: 0,5 mg
Tracking force range: 2,0-3,0 g (20-30 mN)
Tracking force, recommended: 2,5 g (25 mN)
Tracking angle: 20°
Internal impedance, DC resistance: 750 Ohm
Internal inductance: 450 mH
Recommended load resistance: 47 kOhm
Recommended load capacitance: 200-600 pF
Cartridge colour, body/stylus: Black/Black
Cartridge weight: 5 g
Replacement stylus unit: Stylus D 25 M
|
| A budget cartridge that out performs a lot of other top-of-the-line models.
No need to go broke to get an affordable, tough-as-nails scratching tool.
Technical Data:
- Output voltage at 1000 Hz, 5cm/sec: 5 mV
- Channel balance at 1 kHz: 2 dB
- Channel separation at 1 kHz: 20 dB
- Channel separation at 15 kHz: 15 dB
- Frequency range at - 3dB: 20-20.000 Hz
- Frequency response: 20-18.000 Hz + 3 / - 2 dB
- FIM distortion at recommended
tracking force, DIN 45.542:
- Tracking ability at 315Hz at
recommended tracking force: 70 µm
- Compliance, dynamic, lateral: 7 µm/mN
- Stylus type: Spherical
- Stylus tip radius: R 26 µm
- Equivalent stylus tip mass: 0,5 mg
- Tracking force range: 3,0-5,0 g (30-50 mN)
- Tracking force, recommended: 4,0 g (40 mN)
- Tracking angle: 20°
- Internal impedance, DC resistance: 750 Ohm
- Internal inductance: 450 mH
- Recommended load resistance: 47 kOhm
- Recommended load capacitance: 200-600 pF
- Cartridge colour: Black
- Cartridge weight: 5 g
- Replacement stylus unit: PRO S
|
Type: Dual Moving Coil
Frequency Response: 15 to 50,000 Hz
Channel Separation: 30 dB (1 kHz)
Channel Balance: 1.0 dB (1 kHz)
Coil Impedance: 12 W (1 kHz)
DC Resistance: 12 W
Vertical Tracking Angle: 23 degrees
Recommended Load Impedance: Min 100 W
Coil Inductance: 25 mH (1 kHz)
Static Compliance: 35 x 10 – 6 cm / dyne
Dynamic Compliance: 9 x 10 – 6 cm / dyne (100 Hz)
Output Voltage: 0.4 mV (at 1 kHz, 5 cm/sec)
Stylus Shape: MicroLine™
Cantilever: Gold-plated solid boron
Stylus Construction: Nude square shank
Mount: 1/2” centers
Dimensions: 17.3 (H) x 16.8 (W) x 25.7 (L) mm
Weight: 8.0 g
Accessories: 1 non magnetic screw driver; 1 brush; 2 washers; 2 x 13.5 mm mounting screws; 2 x 18 mm mounting screws; 1 plastic protector;
|
Reviews
There are no reviews yet.