| Content |
If you are looking for a gently whooshing modulation with a transparent metallic edge or extreme and highly impressive jet effects, you will find them in the Palmer Pocket Flanger's range of sounds. Rate, Depth and Mix controls provide extensive adjustment for both classic and contemporary flanging.
The Pocket Flanger works on a 9V battery or optional power adapter, e.g. Palmer PW9V.
- Type: guitar effects
- Number of Inputs: 1
- Input Connections: 6.3 mm jack
- Input Impedance: 1 M ohm
- Number of Outputs: 1
- Output Connections: 6.3 mm jack
- Output Impedance: 100 k ohms
- Intrinsic Noise: -85 dB
- Controls: Rate, Depth, Mix
- Indicators: On/Off
- Power Supply: power supply 9 V DC, 9 V battery
- Power Consumption: 20 mA
- Housing Material: sheet steel
- Housing Surface: powder-coated
- Width: 60 mm
- Depth: 100 mm
- Height: 55 mm
| The V845 Wah-Wah pedal is a new version of the most famous guitar effects pedal of all time. Based on the specifications of the original pedal developed by VOX in the '60s, the V845 Wah-Wah offers guitarists the same legendary Wah-Wah tone in a new sturdy but very affordable design. An AC power connector is fitted to save on batteries and the outer case is coated with tough all-black finish making it the perfect choice for your pedal board.
About the VOX Wah-Wah
VOX developed the worldʼs first Wah-Wah effect during the '60s in an effort to allow guitarists to emulate the sound of a trumpet being muted — an important musical ingredient of the day. VOXʼs original Wah-Wah pedal quickly gained widespread popularity and its unique sonic characteristics have encouraged further experimentation by guitarists ever since. Having made spotlight appearances on some of the most famous recordings of all time, the Wah-Wah is still considered "must-have equipment” for guitar players of all levels and abilities today.
VOX V845 Wah-Wah Specifications
- Input/Output jacks: INST jack, AMP jack, DC i/p jack.
- Power supply: One 9V DC battery 6F22(S-006P)
- Power consumption: 540uA @ 9VDC
- Battery life for continuous use: approximately >100 hours with manganese battery (will vary depending on conditions)
- Dimensions: 102(W) x 252(D) x 75(H) (including rubber feet, pedal in lowest position)
- Weight: 942g (including battery)
|
Vintage BOSS phasing effects including 4-, 8-, 10-, and 12-stage phasers, plus new "Rise" and "Fall" effects for unidirectional phasing. Tap tempo sync or realtime control of rate via an Expression/Pedal input.
| Nominal Input Level | -20 dBu |
|---|
| Input Impedance | 1 M ohms |
|---|
| Nominal Output Level | -20 dBu |
|---|
| Output Impedance | 1 k ohms |
|---|
| Recommended Load Impedance | 10 k ohms or greater |
|---|
| Residual Noise Level | -92 dBu (IHF-A, Typ.) |
|---|
| Connectors | INPUT Jack, OUTPUT Jack, EXP/CTL Jack, AC Adaptor Jack (DC 9 V) |
|---|
| Power Supply | DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor |
|---|
| Current Draw | 50 mA (DC 9 V) |
|---|
| Accessories | Dry Battery 9 V type (6F22/9 V) |
|---|
| Options | AC Adaptor (PSA-Series), Expression Pedal (Roland EV-5), Footswitch (FS-5U) |
|---|
| Size and Weight ( incl. battery ) |
|---|
| Width | |
|---|
| Depth | |
|---|
| Height | |
|---|
| Weight | |
|---|
| Building on the 20-year legacy of the famous BOSS BF-2, the new BF-3 flanger pedal gives guitarists and bassists an updated version of the classic BOSS flanger with the thickest stereo flanging sounds ever. Two new modes (Ultra and Gate/Pan) create stereo flanging with incredible depth--even Slicer-type effects and sounds that seem to "swirl" around the listener. An instant classic.
- BOSS' best flanging effects in a compact pedal
- New Ultra and Gate/Pan modes for ultra-fat flanging and futuristic slicer-type sounds, respectively
- Momentary mode turns flanging on instantly
- Tap tempo adjustable via pedal
- Independent Guitar and Bass inputs and stereo outputs
- BOSS 5-year warranty
| Wah-Wah Pedal HB-01 hell-babe
The HELL-BABE HB01 is unlike any wah you’ve ever stepped on, offering a tremendous array of tone-sculpting options. You get everything from “old-school” wah to the most up-to-date sounds, all in one mesmerizing effects pedal. Add to that optical control that does away with noisy pots, an adjustable spring mechanism and tunable boost, and this babe’s a contender! The HELL-BABE will add new dimension and depth to your artistic expression.
What’s So Great About the HELL-BABE?
First of all, the HB01’s heel-down Range control provides low frequency adjustment that can be swept from 440 Hz down to 250 Hz, making the HB01 the ideal companion for either guitar or bass. For custom-tailoring the toe-down frequency range, the HELL-BABE features a Fine control, allowing you to adjust the frequency sweep as high as 2.2 kHz.
Volume Boost
You can even dial in a powerful volume Boost (up to +15 dB), so that when you do step on the HB01, your guitar will rise to the top of the mix. A highly versatile Q control is provided for precise filter shaping and for achieving vocal-like effects.
| The Marshall EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay. Add dense rhythmic textures to your sound.
The Marshall EH-1 ECHOHEAD recreates six different delay effects for you to explore, from crystal-clear echoes to hypnotic reverse delays via the vintage whir of a retro tape machine. Create pulsing tones from your guitar rig and add dense rhythmic textures to your sound. The EH-1 Echohead features a maximum delay time of 2000ms, stereo outputs and a tap tempo delay imput. The EH1 Echohead dual outputs offer the choice of using a passive bypass for the main signal path to ensure complete tonal integrity or to allow your pedal to spill over, permitting your echo to naturally die away.
The main features of the Marshall EH-1 ECHOHEAD include:
- 6 different, high quality delay effects for you to explore
- Multi-mode selector switch
- Delay time control
- Feedback control
- Level control
- Solid metal casing
- Passive bypass
- Tap tempo pedal input
- Power: 9V DC Centre Negative Regulated PSU or PP3 battery
- Minimum Current Draw: 80mA
- Switches: On/Off Switch
- Indicators: On/Off LED
- Jacks: 2 Input, 2 Output 'Jack sockets' (1/4 inch)
- Input Impedance: 1MOhm
- Output Load Impedance: less than 1kOhm
- Dimensions: 120mm x 65mm x 55mm
- Weight: 510 grammes
|
Reviews
There are no reviews yet.