Providing classic bathtub and slapback echo for authentic rockabilly guitar as well as rich, ambient repeats, the Palmer Pocket Series Analog Delay oozes the warm vintage character of the classic 70ies pedals.The Time control sweeps up to a maximum delay of 360 ms while Rate and Mix set the number of repeats and the direct […]
Providing classic bathtub and slapback echo for authentic rockabilly guitar as well as rich, ambient repeats, the Palmer Pocket Series Analog Delay oozes the warm vintage character of the classic 70ies pedals.The Time control sweeps up to a maximum delay of 360 ms while Rate and Mix set the number of repeats and the direct to delayed sound ratio.
The POCKET ANALOG DELAY works on a 9V battery or optional power adapter, e.g. Palmer PW9V.
Type: guitar effects
Number of Inputs: 1
Input Connections: 6.3 mm jack
Input Impedance: 1 M ohm
Number of Outputs: 1
Output Connections: 6.3 mm jack
Output Impedance: 100 k ohms
Intrinsic Noise: -85 dB
Controls: Time, Mix, Rate
Indicators: On/Off
Power Supply: power supply 9 V DC, 9 V battery
Power Consumption: 30 mA
Housing Material: sheet steel
Housing Surface: powder-coated
Width: 60 mm
Depth: 100 mm
Height: 55 mm
Weight
0.25 kg
Reviews
There are no reviews yet.
Be the first to review “PALMER PEPDEL MI POCKET DELAY – Delay effect for guitar” Cancel reply
Providing classic bathtub and slapback echo for authentic rockabilly guitar as well as rich, ambient repeats, the Palmer Pocket Series Analog Delay oozes the warm vintage character of the classic 70ies pedals.The Time control sweeps up to a maximum delay of 360 ms while Rate and Mix set the number of repeats and the direct to delayed sound ratio.
The POCKET ANALOG DELAY works on a 9V battery or optional power adapter, e.g. Palmer PW9V.
Type: guitar effects
Number of Inputs: 1
Input Connections: 6.3 mm jack
Input Impedance: 1 M ohm
Number of Outputs: 1
Output Connections: 6.3 mm jack
Output Impedance: 100 k ohms
Intrinsic Noise: -85 dB
Controls: Time, Mix, Rate
Indicators: On/Off
Power Supply: power supply 9 V DC, 9 V battery
Power Consumption: 30 mA
Housing Material: sheet steel
Housing Surface: powder-coated
Width: 60 mm
Depth: 100 mm
Height: 55 mm
Product Features:
Shape your sound and eliminate feedback with 7 bands of equalization
This BEHRINGER product has been designed to compete head to head with leading products on the market
Wide frequency range from 50 Hz to 10 kHz with a powerful 15 dB boost/cut per band
Status LED for effect on/off and battery check
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
First-class electronic On/Off switch for noise-free operation
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
How the specific frequency bands of the BEQ700 can shape your sound
50 Hz (sub-bass)
Boost: To thicken up sub-bass content, which is mostly felt rather than heard
Cut: To eliminate stage "rumble” and sub-bass content that can rob sound system power
120 Hz (soft bass)
Boost: To enhance the lower end of the bass spectrum
Cut: To reduce the tendency of low frequency content to overwhelm a small room
400 Hz (hard bass)
Boost: To enhance the "hard” bass punch of fundamental tones
Cut: To reduce punch for better linkage with the kick drum
500 Hz
Boost: or Cut: To control bass clarity and warmth
800 Hz
Boost: To add an aggressive edge to the overall bass sound
Cut: For reducing somewhat nasal or horn-like content
4.5 kHz
Boost: To make the bass cut through the mix. Creates a more distinctive plucked tone
Cut: To eliminate harshness
10 kHz
Boost: To bring out the upper harmonics and add edge to the overall bass tonality
Cut: Apply a cut to reduce harsh high-frequency content or hiss
User's Manual
Vintage BOSS phasing effects including 4-, 8-, 10-, and 12-stage phasers, plus new "Rise" and "Fall" effects for unidirectional phasing. Tap tempo sync or realtime control of rate via an Expression/Pedal input.
Nominal Input Level
-20 dBu
Input Impedance
1 M ohms
Nominal Output Level
-20 dBu
Output Impedance
1 k ohms
Recommended Load Impedance
10 k ohms or greater
Residual Noise Level
-92 dBu (IHF-A, Typ.)
Connectors
INPUT Jack, OUTPUT Jack, EXP/CTL Jack, AC Adaptor Jack (DC 9 V)
Power Supply
DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor
Current Draw
50 mA (DC 9 V)
Accessories
Dry Battery 9 V type (6F22/9 V)
Options
AC Adaptor (PSA-Series), Expression Pedal (Roland EV-5), Footswitch (FS-5U)
Size and Weight ( incl. battery )
Width
73 mm
2-7/8 inches
Depth
129 mm
5-1/8 inches
Height
59 mm
2-3/8 inches
Weight
420 g
0 lbs. 15 oz.
VINTAGE TUBE OVERDRIVE TO800
What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain
Vintage Tube-Like Tone
In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.
Ease of Use
Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
Get vintage overdrive, smooth sustain and screaming fat tone
Perfect for guitar; great for bass and keyboards, too
Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
Captures every nuance of your playing from smooth overdrive to screaming tube sounds
Dedicated Drive, Tone and Level controls for awesome sound shaping
Status LED for effect on/off and battery check
Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
Rugged electronic On/Off switch for noise-free operation
The MD-2 Mega distortion takes the bottom-heavy distortion sounds heard in today's new-school metal and pushes it to the extreme. The secret is a special dual-stage distortion circuit with an added gain boost-plus new Bottom and Tone controls--for crushing distortion with massive low end. Take your distortion into the future with the MD-2.
Produces extreme, low-end distortion for modern metal and hard rock
Gain Boost circuit creates huge distortion and sustain regardless of level
New Bottom control for bottom-heavy distortion matched to 6- or 7-string guitars
Tone control adjusts balance between high and low frequencies
BOSS 5-year warranty
Features The BD-2 Blues Driver delivers the creamy, yet crunchy sound associated with great blues guitar. This popular pedal provides instant access to the kind of warm overdrive and emotive distortion usually reserved for 30-year-old tube amps.
Classic "blues" guitar tones with tube amp simulation
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
![acrobat_reader_logo.](http://"images/acrobat_reader_logo.jpeg“/ "acrobat_reader_logo."){kind=logo}
User's Manual
Reviews
There are no reviews yet.