Content |
Pioneer DJ HDJ1500N overview
The gold HDJ-1500-N from Pioneer are DJ headphones designed to provide wide frequency response, minimal sound leakage, and long-wearing comfort for DJs, music producers, and audio enthusiasts at home, on stage, or on the go. The 50mm dome-type drivers produce a frequency response of 5 Hz to 30 kHz.
The closed-back design, urethane memory foam earpads, and soundproofing technology isolate you from outside noise, so you can focus on the music. Swiveling earcups make single-ear monitoring easy, which is great for live performances.
The single-sided cable can be switched between left and right earcups, or detached and stored separate from the headphones. Use the screw-on 1/4" adapter to interface with audio interfaces and mixers. A carrying pouch is included for protection during transport.
- 50mm dome-type drivers
- Closed-back design minimizes sound leakage
- Soundproofing chamber reduces outside noise
- Swiveling earcups make it easy to monitor with one ear
- 5 Hz to 30 kHz frequency response
- Comfortable urethane memory foam earpads
- Detachable single-sided cable
- Includes pouch and screw-on 1/4" adapter
Type |
Closed-back dynamic headphones |
Drivers |
50 mm dome type |
Impedance |
32 Ohms |
Frequency Response |
5 Hz to 30 kHz |
Output Sound Pressure Level |
108 dB |
Maximum Input Power |
3500 W |
Connector |
1/8" (3.5 mm) stereo mini-jack (gold plated, 2-way, screw-type) |
Cable |
4' / 1.2 m (not extended) 10' / 3.0 m (extended) |
Weight |
10.1 oz / 285 g (without cord) |
|
- Comfortable, sturdy high-powered 3500 mW headphones
- Ultra dynamic range with great sounding high and lows
- Flexable housing design allows for double or single ear monitoring; folds up for easy transport
- Input: Mini plug with two screw-on 1/4" stereo adapters
- Includes Headphone bag, right angle 1/4" adapter & straight 1/4" adapter
Specifications:
- Speaker Driver Unit: 57 mm diameter
- Max Power: 3500mW
- Impedance: 64 Ohms
- Frequency Response: 5Hz to 30KHz
- Sensitivity: 107dB (+/-3dB) (S.P.L. at 1 KHz)
- Cord Length: 9 feet/3 meters
|
Capital is a durable, foldable and flexible headphone from AIAIAI, that seeks to provide the on-the-go urbanite with the opportunity to listen to his or her preferred sounds in any kinds of weather at all times, while wearing a design that is effortlessly iconic, thoroughly realized and comfortable.
Made out of reinforced fiberglass with a lightweight rubber-brace, this is a headphone built to withstand heavy everyday use in urban environments. It\'s tested to withstand rain, snow and dirt while delivering clear and crisp sound from the protected 40mm driver.
Driver Unit Size40 mmPlugAngled StereoPlug3.5 mmSpeaker Impedance32 OhmSpeaker Sensitivity112 +/- 3dBMaximum Power Input70 mWFrequency Response20-20KHzMicrophone Sensitivity-42 +/- 3dBMicrophone DirectivityOmni-directionalCable length135cm
|
"Most on ear and over headphones have a gap" -CNET
Minimize the unsightly gap between the headband and your head for the best comfort, sound and silhouette. 5+ years of R&D resulted in a wind-tunnel worthy design that contours evenly to the shape of your head. Discover why "the fit is the sound.“
SteelFlex Headband - virtually indestructible bespoke fit
ABC+P - Anything But Circles + Plastic, because heads are not round, ears are not spheres and metal lasts longer
Memory Foam Cushions - supple long session comfort naturally adapts to your ears for faster "burn-in” & better noise isolation
MILITARY-LEVEL QUALITY
Tested beyond military-level MIL-STD-810G quality standards.
Kevlar-reinforced Cable - 1+ million bends for cables & 45 degree strain relief (100x industry standard)
Concrete Drop - 70+ drops from 1.5m onto concrete
Steelflex Headband - 10+ flat bends
Environmental Weather - survives servere high/low temperatures, humidity, salt spray & UV rays
TECHNICAL DETAILS
Type - On-Ear Supra-aural
Drivers - 40mm Dual-Diaphragm High Fidelity (patent pending)
Frequency Response - 5 - 30,000 Hz
Sensitivity - 105dB @ 1kHz 1mW
Microphone Sensitivity - -42dB @ 1kHz
Impedance - 28.5Ω
Weight - 195g (headphone only)
Plug - 45 degree, 24k gold-plated 3.5mm (1/8“) stereo
| CLARITY AND COMFORT FOR THE MODERN DJ
One place a DJ can't compromise, is in how they hear their mix. The Numark HF-125 headphone set delivers the goods with flexible 7-position independently adjustable dual ear cups, large 40mm Mylar speaker drivers, 6' tangle-resistant cord with 1/4" connector, and padded headband and ear cups. | TMA-2 DJ is developed with professional artists across a variety of genres, and put to the test on stages all around the world.
The titanium-coated S02 speaker unit delivers a punchy and intense sound representation focused on bass and low-end dynamics. Combining the durable H02 nylon headband and the E02 on-ear PU leather earpads providing high isolation, results in a powerful, sturdy headphone suitable for live performance and electronic/bass heavy music.
PUNCHY AND PRECISE BASS
Critically acclaimed sound specifically designed for live performance. Punchy and intense sound representation with a focus on bass and low-end dynamics.
HIGH ISOLATION EARPADS
Soft on-ear memory foam earpads covered with PU leather. High isolation and intense sound representation.
RESPONSIBLE MODULAR DESIGN
Upgrade and expand as technology or needs evolve to extend the functional lifetime of the product and create less waste for the planet.
|
Reviews
There are no reviews yet.