| Content |
In-Ceiling Audiophile Magic
RC60i's round profile looks just like a lighting fixture so it will blend into your ceiling without calling attention to itself. But they sound sooooo much better than your typical in-ceiling speakers that resemble a watering spout.
RC60i Features:
- Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets.
- RCi speakers utilize the "virtual enclosure" of your in-wall and in-ceiling space to enhance their bass response and smooth low frequency blending with the midrange.
- Lightweight and stiff blue polymer cones deliver excellent damping and bass response.
- Durable, computer-modeled, injection-molded butyl rubber surrounds suppress unwanted cone resonances for a lifetime of reliable sound.
- Aimable swivel tweeters for greater accuracy and more realistic imaging. (All models except RC6s.).
- Rustproof stainless steel hardware, durable butyl rubber surrounds and powder coated aluminum (in-ceiling) & painted steel (in-wall) grilles make RCi Series speakers suitable for high moisture areas like bathrooms or even under eaves of an enclosed porch. (RCi series are not suitable for exposed outdoor use).
- RCi speakers have paintable grilles and practically disappear into any room.
- RCi Series speakers are timbre-matched to other Polk speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.
| Dimensions - Cut-Out Diameter | 7 5/8 (19.37cm) " | | Dimensions - Mounting Depth (includes 1/2 drywall)“ | 2 3/8 (6.03cm) " | | Dimensions - Overall Depth | 2 7/8 (7.30cm) " | | Dimensions - Overall Diameter | 9 (22.86cm) " | | Dimensions - Pre-Construction Bracket | PB 60 | | Driver Complement Mid / Woofer - Diameter | 6 1/2 (16.51cm) " | | Driver Complement Mid / Woofer - Quantity | 1 | | Driver Complement Mid / Woofer - Type | Dynamic Balance driver with mineral-filled polymer cone and rubber surround | | Driver Complement Tweeter - Diameter | 3/4 (1.91cm) " | | Driver Complement Tweeter - Quantity | 1 | | Driver Complement Tweeter - Type | Dynamic Balance tweeter with metalized soft dome in ball-and-socket swivel mount | | Electrical - Efficiency | 89 dB | | Electrical - Inputs | Spring-loaded clips | | Electrical - Lower -3dB Limit | 60 Hz | | Electrical - Nominal Impedance | 8 ohms | | Electrical - Recommended Amplifier Power | 20 - 100 watts per channel | | Electrical - Total Frequency Response | 40Hz - 20kHz | | Electrical - Upper -3dB Limit | 20 kHz | | Shipping - Total Shipping Weight | 6 pounds | | Shipping - Unit of Measure | pair | | Warranty - Speaker Warranty | Lifetime |
|
Recommended Usage In-Ceiling Front / Surround Speakers
Type 2-way coaxial
Woofers 8” PP (polypropylene) mica cone
Tweeters 1” fluid-cooled soft dome
Swivel Tweeter and Midrange Driver (Tweeters)
Paintable Grill with Protective Cover Included Yes
Frequency Response 50 Hz – 28 kHz
Sensitivity 90 dB (2.83 V, 1 m)
Input Power (Maximum / Nominal) 140W / 50W
Impedance 8 Ohms
Product Dimensions (W x H x D) 11-1/8" x 4-3/4“
Mounting Depth 4-1/4”
Product Weight (lbs. each) 4.2
|
Features:
Desinged for systems utilizing an external active subwoofer crossover, separate amplifier channel for the subwoofer loudspeaker. Includes Kevlar-reinforced 300 mm (12 inch) subwoofer driver woofer with 75 mm (3 inch) voice-coil. High power handling of 400 Watts with high sensitivity provides high SPL capability. The innovative EZRail™ feature built into the metal baffle temporarily holds one side of the speaker baffle in place until the installer can affix the baffle to the backcan with screws.
Specifications:
Frequency Response 30 Hz - 4.5 kHz, -10dB Maximum Power Handling 600 Watts, long term 1000 Watts, 2 hrs. (pink noise) Impedance 8 Ohms SPL 121dB continuous, 124dB peak, long term Beamwidth Not Applicable Horizontal Beamwidth Not Applicable Vertical Beamwidth Not Applicable Directivity Not Applicable Construction Kevlar Reinforced Cone Magnet Saturated-gap Voice Coil 3" Dimensions (HxWxD) 14.4 x 14.4 x 6.3" (366 x 366 x 160mm) Weight 17 lb (7.7 kg)
| * Driver Size (dual-cone) 200 mm (8 in)
* Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 97 dB
* Frequency Range (-10 dB) Driver/Grille Assembly: 50 Hz - 17 kHz
o Installed in CSS-BB backcan: 90 Hz - 17 kHz
* Coverage (2 kHz) 110°
* Driver Continuous Power Handling 20 Watts
* 100V Taps 10W, 5W, 2.5W
* 70V Taps 10W, 5W, 2.5W, 1.3W
* 25V Taps 10W, 5W, 2.5W, 1.3W
* Transformer Insertion Loss 1.5 dB Maximum
* Transformer Connection Bare wire
* Motor Mass 283 g (10 oz)
* Safety Agency: Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849.
* Matching CSS Backcan CSS-BB8 (0.15 cu ft)
* Bolt Mounting Circle to Backcan 4 points on 286 mm / (11.25 in) diameter
* Cutout Diameter
o Open-back: 216 mm (8.5 in)
o In CSS-BB backcan 295 mm (11.7 in)
* Depth (behind grille) 73 mm (2.9 in)
* Grille Diameter 327 mm (12.9 in)
* Net Weight (ea) 1.58 kg (3.5 lb)
* Shipping Weight (ea) 2.25 kg (5.0 lb)
* Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan. |
SC-C
High Performance In-Wall Speaker
8 15/16" H x 15 1/2" W
Customer Rating:
Be the first
No other custom install series offers the sonic and brand name performance of Polk Audio's SC Series. And now, with the addition of the SC-c Center Channel, the SC Series enables you to offer your customers a complete home theater solution without compromising the sound or the budget.
Timbre-Matched to the entire SC Series line.
Two 5 1/4" Dynamic Balance® Polymer Composite Mid-Woofers for smooth, wide-range response with low distortion.
3/4" Silk Dome Tweeter with neodymium magnet for clear, detailed highs; excellent imaging even for off-axis listening positions.
Wide Dispersion Design for uniform sound-coverage throughout even large rooms.
Gold-Plated Binding Posts, the same heavy-duty terminals used in our LSi/TCi Series.
Durable, Moisture Resistant Materials, including butyl rubber surrounds and stainless steel hardware.
Infinite Baffle Tuning uses the virtual enclosure of in-wall space for superior bass response.
Paintable, Powder-Coated Aluminum Grille allow SC-c to virtually disappear in any room.
Installation Is Easy As 1-2-3 with the Rotating Cam System, securing the speaker safely with no extra assembly or mess.
Pre-Construction Bracket (PBLCic) is available.
|
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter 2 - 3/4" Diameter (1.91cm)
Silk Dome Tweeters
Electrical
Overall Frequency Response 40Hz-20kHz
Lower -3dB Limit 55Hz
Upper -3dB Limit 20kHZ
Nominal Impedance 8 ohms
Recommended Amplifier Power 20 - 100 w/channel
Efficiency 89 dB
Dimensions
Overall Diameter 8-15/16“(22.70cm)
Cut-out Diameter 7-5/8“(19.37cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material) 2-5/8" (6.67cm)
Overall Depth 3-1/8" (7.94cm)
Shipping/Other
Shipped As each
Product Weight 2.55 lbs. (1.16kgs) each
Total Shipping Weight 3.00 lbs. (1.36kgs)
Speaker Warranty Lifetime Warranty
|
Reviews
There are no reviews yet.