Description | | The SUB 8003-AS II active subwoofer features the latest generation of RCF woofer technology, digital amplifiers and DSP processing with higher power and enhanced performance. It offers the perfect blend of bass reproduction, high SPL and compact dimensions for mobile use by bands and DJs. | | |
The black SUB 8004-AS Professional Series Active Subwoofer from RCF features a high-power, hypervented 18" woofer with 4" inside/outside voice coils designed to deliver a serious amount of low frequency. Powered by a 2500W digital amplifier module, the SUB 8004-AS can perform in the most demanding situations. The input board includes volume control, deep/punch switch, high-pass switch, phase switch, cardioid, and time delay.
The sub is stackable and lightweight for easy set up and tear down, thanks to the ergonomic handles. A pole receptacle on top and side allows the use of the sub in various configurations. The powder coated front grille integrates a special transparent-to-sound foam backing on the inside to further protect the transducer from dust.
RCF's Class-D power amplifier technology packs huge performance, operating with high efficiency into a lightweight solution. RCF amplifiers deliver an ultrafast attack, realistic transient response, and impressive audio performance. The amplifier features a solid machined aluminium structure, which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the amplifiers present SMPS power supply section to produce maximum output and minimum weight.
RCF developed advanced transducer technology including the application of high-tech materials such as neodymium, carbon fiber, pure titanium, kevlar, kapton, and mylar hybrids. RCF has been instrumental in technological inventions such as carbon fiber cone molding, double silicon spiders, inside/outside voice coil windings to edge wound voice coil manufacturing and pure titanium diaphragm forming.
RCF subwoofers are the first choice of many sound engineers, thanks to the very high SPL levels at very low frequencies, small dimensions compared to the competitors, self-powered design, internal delay control, cardioid configuration options and impressive size/weight to SPL output ratio.
The RCF cabinets are made of baltic birch plywood coated with a textured black finish. The subs are stackable and lightweight, for easy set up and tear down, thanks to the ergonomic handles. A pole receptacle on top and side allows the use of the box in various configurations. The powder coated front grille integrates a special transparent-to-sound foam backing on the inside to further protect the transducers from dust.
Live sound, rental, portable PA, clubs, ballrooms, live theatres, houses of worship, theme parks, music playback, and sound reinforcement in small- and mid-size venues, and corporate A/V professionals and sound system hire companies
| |
Content |
System type : active vented enclosure subwoofer
Amplifier Continuous Power : 250 W
Frequency response : 40 Hz - 160 Hz
Low Frequency Device : 18'' woofer
Crossover Frequency : 160 Hz, 12 dB/oct. LP - 6 dB/oct. HP
Power Supply : 230 VAC 50 Hz or 117 VAC 60 Hz
Maximum Power Consumption : 510 VA
Connectors : IN: 2 x jack 1/4''
OUT: 2 x jack 1/4''
Construction : 18 mm MDF
Finishing : anti-scratch finish
Mounting Pole : 1 x top
Weight : 39 kg(85.995lb )
Dimensions (W x H x D) : 54.5 x 64 x 48 cm
Controls : volume, gnd. lift
|
- 2200 W
- 135 dB max SPL
- 35 Hz - 120 Hz frequency response
- 18" Woofer, 4.0" v.c.
- Total Power: 2200 W Peak, 1100 W RMS
- Selectable gain, X-over and delay
- Birch tour grade cabinet
- Stereo XLR input, Stereo XLR signal output
|
Features
- Powered horn-bass subwoofer system
– High output 18″ loudspeaker
– Polarity switch
– Filtered output defeat switch
– Variable 100 -160 Hz high-pass filter
– Gain control
The Avant 118A is a powered rear-loaded horn-bass subwoofer system designed to provide extended bass response for the Avant full-range cabinets.
A 1250 W Class D amplifier drives a D.A.S. 18LX log excursion bass loudspeaker. The 18LX loudspeaker incoporates a 4″ voice coil for high power handling and output.
The Avant 118A incorporates a 1250 W Class D amplifier with switch mode power supply (SMPS) and digital signal processing (DSP).The amplifier has a unique EQ switch which allows the user to select a Deep subbass response or a Loud bass response. The system includes two balanced inputs with stereo filtered output connections for satellite systems. The variable crossover ranges from 100 Hz-160 Hz and can be defeated to offer stereo "loop thru” connections. A gain control and polarity reverse feature increase user control over the system.
Technical Data
Nominal LF Amplifier Power | 1250 W (Class D) | Frequency Range (-10 dB) | Loud: 50 Hz – 142 Hz
Deep: 45 Hz -138 Hz | Rated Peak SPL at 1 m | 136 dB | Internal Crossover | Variable 100-160 Hz | Connectors | INPUT: 2 x Female XLR
LOOP THRU: 2 x Male XLR
AC INPUT: PowerCon NAC 3
AC OUTPUT: Powercon NAC 3 | AC Requirements | 115 V, 50 Hz/60 Hz
230 V, 50 Hz/60 Hz | Current Draw (1/3 power @ 230 V) | 2.7 A | Enclosure Material | Birch Plywood | Color/Finish | Black/Iso-Flex Paint | Dimensions (H x W x D) | 84 x 60 x 65.5 cm
33 x 23.6 x 25.8 in | Weight | 55 kg (121 lb) |
|
SPECIFICATIONS
Configuration 18" subwoofer
Transducer
18" cone transducer
Frequency Response (-6 dB) 38 Hz - 124 Hz
Frequency Range (-10 dB) 34 Hz - 143 Hz
Maximum SPL1 135 dB peak
Amplifiers
Power Output2 1000 W Class D continuous
2000 W peak
Input Impedance (ohms) XLR / ¼“: 38k balanced / 19k unbalanced
Controls Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (On/Off/Limit)
Indicators Power, Signal, Standby, Limit
Connectors Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100 - 240 VAC, 50 - 60 Hz
AC Power Consumption
(1/8 Power) 100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material 15 mm painted birch plywood
Finish Black textured paint
Grille Rugged Powder-Coated Steel Grille
Dimensions (HWD) 20.1" x 23.4" x 29.9" with casters
510 mm x 595 mm x 761 mm with casters
Weight (Net) 88 lb (40 kg)
Available Accessories KW181 COVER
1 For comparison purposes and in accordance with common industry practice, maximum peak SPL specifications are theoretical calculations based upon transducer sensitivity and peak available amplifier power.
2 Independent of limiters and driver protection circuits.
|
Configuration |
Active Subwoofer |
Enclosure Type |
Subwoofer |
Total Power Capacity |
2500 W Peak
1250 W RMS |
Amplifier Class |
Class-D |
HF Driver |
None |
MF Driver |
None |
LF Driver |
1 x 18" / 45.7 cm Woofer |
LF Voice Coil |
Dual 4" / 10.2 cm
|
Frequency Response |
30 Hz to 120 Hz |
Maximum SPL |
136 dB |
Input Sensitivity |
-2 dBu (Min)
4 dBu (Max) |
Protections |
RMS, Thermal |
Audio I/O |
1 x XLR 3-Pin Female Balanced Line Input
1 x XLR 3-Pin Male Balanced Line Output |
Network I/O |
None |
USB |
None |
Wireless Connectivity |
None |
EQ |
None |
Parametric EQ |
None |
Semi-Parametric EQ |
None |
Filters |
Low-Pass:
90 Hz / 120 Hz |
Dynamic Processing |
Fast Limiter |
Alignment Delay |
None |
Phase Adjustment |
Yes |
Digital Signal Processing |
Delay |
AC Input Power |
Factory Selectable:
100 to 120 VAC, 50 / 60 Hz (T 10 A H 250 V) |
AC Power Connector |
1 x powerCON Input (Locking)
1 x powerCON Output (Locking) |
Handles |
1 x Each Side |
Cooling |
Convection |
Construction Material |
Plywood |
Certifications |
CE
*as per Manufacturer |
Dimensions |
27.6 to 22 x 27.6" / 700 to 558 x 700 mm |
Weight |
123 lb / 55.8 kg |
|
Boasting an 18' woofer in a bass reflex housing, this bin delivers a low-ranging bass foundation. The specially designed active stereo x-over routes the right frequency spectrum to the mid/ high unit connected via the Satellite
Out. The active PR:O 18 SUB A model also ships with a 600W RMS power amp and a port for active satellites.
- Application: Subwoofer
- Output Power: 600 Watt
- Built-in stereo X-over
- Very punchy High-power Subwoofer for Bands and DJʼs
Model | PR:O 18 Sub A | Title | PREMIUM PR:O | Product Class | Active Systems | Frequency response +/- 3 dB | 48 Hz – Xover | Frequency response -10 dB | 38 Hz – Xover | Maximum SPL, @ 10% THD | 125 dB | Connections | 2x XLR Kombi Line In balanced,2x XLR L/R Out Mid/High,2x XLR Through balanced | LF Speaker | 1x18“ | X-Over | 75 Hz – 150 HZ, switchable | Subsonic filter | 35 Hz | Peak limiter | yes | RMS-Soundlimiter | no | Amplifier | 600 W Class D – 4 ohms | Pole mount | M20 threaded base plate | Handles | 2, integrated | Enclosure | MDF | Grille | metal grille with acoustic foam | Finish | acrylic painture, black | Dimensions (WxHxD) | 53 cm x 61 cm x 64 cm | Weight | 39,8kg / 87.8 lbs. |
|
Reviews
There are no reviews yet.