PROEL TFLV-212P8

System type :  2-way vented enclosure 
Nominal Impedance :  8 ohm 
Input power rating (continuous) :  600 W 
Input power rating (peak) :  1200 W 
Frequency response :  55Hz - 18kHz (-6dB, +6dB) 
Sensitivity :  101dB @ 1W/1m 
Maximum (peak) Output :  131 dB @ 1m 
Low Frequency Device :  2 x 12'' woofer - 3'' voice coil 
High Frequency Device :  1.4'' throat - 3'' titanium voice coil 
Coverage Angle H. (-6 dB) :  70¡Æ 
Coverage Angle V. (-6 dB) :  70¡Æ 
Trapezoidal taper :  10¡Æ 
Monitor Taper :  40¡Æ 
Crossover Frequency :  1800 Hz 
Signal Processing :  Proel DSO26 (biamp mode) 
Flying System :  4 x M10 - top, bottom, rear 
Connectors :  2 x SPK4MP linked 
Construction :  18mm birch plywood 
Finishing :  Anti-scratch coating 
Cabinet Colour :  Black 
Mounting Hole :  1 x bottom 
Weight :  32 kg (70.560 lb) 
Dimensions (W x H x D) :  40 x 87.5 x 43 cm 

Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL122 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL122 is ideally suited to be used in most demanding applications. The VL122 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the rugged DND 12350 Transducer is used. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL122 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.

Order-# D113103 Cabinet Full-Range Configuration passive 2-Way or Biamped Mode Nominal Impedance 8 ohms Rated Power RMS 400 watts Program Power 800 watts Peak Power 1600 watts SPL 2,83 V/1m 99 dB max. SPL 1m (calc. with Peak) 131 dB Freq. Range (-10 dB) 60Hz - 20Hz Coverage Angle nom. 90° x 45° Passive X-Over Frequency 1,5 kHz VCT Protections yes Components HIGH Ev ND6-8 Order-# D361493 Components LOW DND 12350 Order-# D366559 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF 2+/2- Pin Wiring Biamped LF 1+/1- Dimensions (WxHxD) mm 385x 715x 374 Net Weight 24 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel, Acoustic Foam

Active or Passive     Passive
Frequency Response     -10dB:48-20,000Hz
Power Capacity     600W
Maximum Sound Pressure Level (SPL)     131dB
Nominal Sensitivity     97dB
Impedance     8 ohms
Crossover     2KHz
Low Frequency Driver     DVX3121, 12" (305mm) Driver
High Frequency Driver     ND2, 1" (25.4mm) exit Neodymium
Enclosure Material     Polypropylene Structural Foam
Input Connections     Glandnut SJO cable
Mounting Options     Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure
Dimensions     24.14 x 15.64 x 14.26" (613 x 397 x 362mm)
Weight     43.7 lbs (19.8 kg)

The C5212 W is a full range extremely versatile wide-dispersion two-way loudspeaker system for medium throw applications.

The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.

Chassis Size    304.8 mm (12“)
Color    Black
Color    White
Directivity Index    11.1 dB
Input Connections    Four-pin Speakon (2)
Speaker Type    Fullrange
Speaker Type    Mid-High
Speaker Type    Two-Way
Frequency Response (-10 dB)    50 - 20000 Hz
Internal Crossover    Yes
Sensitivity 1 W/1 m    99 dB
Max. SPL/1m (calc)    131 dB
Coverage
(Nominal -6 dB) H°    65 °
Coverage
(Nominal -6 dB) V°    65 °
System Power Handling (Continuous/Program/Peak)    300 Watts
LF Transducer    DL12BFH
HF Transducer    DH2010
Crossover Frequency    1500 Hz
Nominal Impedance (Passive)    8 Ω
Minimum Impedance    6 Ω
Flying    Yes
Outdoor    No
Height    586 mm (23.07“)
Width    429 mm (16.89“)
Depth    312 mm (12.28“)
Weight Net    14.5 kg (31.97 lbs)

The DYNACORD VL212 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications. The VL212 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two rugged DND 12350 transducers are used. The in-line topology guarantees excellent pattern control even for the low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL212 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations. The VL212 can be used as a general purpose stand-alone fullrange cabinet and as a satellite or delayed system cabinet in larger set ups.

Order No. D 113 133 Cabinet Full-Range Configuration Passive 2-Way Switchable to biamped mode Nominal impedance 4 Ohms Rated power RMS 800 Watts Program power 1600 Watts Peak power 3200 Watts SPL 2,83 V / 1m 2W / 4 Ohm 105 dB Max. SPL 1m (calculated with peak power) 137dB Frequency range ( -10dB ) Full range 80Hz - 19kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 50Hz - 19kHz Coverage angle 1 kHz -6dB 90° * 45° Passive crossover frequency 1.5kHz Active crossover frequency 1.5kHz 24dB/Oct. Linkwitz-Riley, 1,5kHz Linear-Phase FIR Voice coil tracking protection Yes Component HIGH Electro-Voice ND6-8 Neodymium Order No. 361493 Component LOW 2 x DND 12350 Order No. 366559 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connectors Biamped Lo 1+, 1- Hi 2+, 2- Wired through 1+, 1-, 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) 385x1035x374mm Shipping weight kg Net weight 34kg Enclosure material Birch plywood Finish Black, 2-component paint Grille Powder coated steel, acoustic foam Handles 2