Content |
The Reloop RP-8000 combines modern DJ technology in an advanced turntable. This hybrid high torque turntable does the balancing act between approved direct drive technology and a digital control section for your DJ software. The RP-8000 is able to communicate with any midi compatible DJ software - an additional modular controller is not necessary anymore. Serato Scratch Live mappings are also available with which the worldwide most popular and stable DVS system can be controlled. With the Trax encoder it is possible to scroll through your playlists and comfortably load tracks onto the decks.
Features - Advanced Hybrid Torque Turntable
- Digital DJ turntable with upper-torque direct drive
- MIDI compatible control section consisting of Trax encoder, 8 backlit drum pads and 4 combinable performance modes (cue, loop, sample and slicer)
- Large Trax encoder
- Auto deck-assign feature
- Turntable link USB port
- Digital LC-Display for pitch display, deck assignment and firmware settings
- Adjustable start/brake (0.2 - 6 seconds) & torque (1600 - 4500 g/cm)
- Metal top panel with metallic finish
- Phono and line output (no grounding necessary)
- Direct connection of turntable and motor for best possible stability
- Especially heavy finish
- High end tonearm
- Pitch range +/-8%, +/-16%, +/-50%
- High resolution pitch fader (0,02% Resolution)
- LCD pitch display
- Easy to exchange, freely revolvable needle illumination with super bright LED
- Quartz lock
- Safety power switch
- Reverse switch
- 2 start/stop buttons for vertical positioning
- Smart USB link for up to 4 turntables
- Rubber inlay for reduction of vibrations and ambient noise
- Removable mains and RCA cables
- Sunk-in connection cavity for easy case installation
- Shock proof feet
- Vibration-resistant base
- Serato Scratch Live mappings available
- Plug'n Play with Serato DJ (min 1.6.2)
Technical Data - Type: manual quartz direct drive turntable with MIDI control
- Drive: quartz driven upper-torque direct drive
- Motor: brushless DC motor
- 3 speeds, fully manual
- Turntable RPM: 33 1/3, 45 and 78 RPM
- Turntable: aluminum die casting
- Pitch: variably adjustable +/-8%, +/-16%, +/-50%
- Torque: adjustable from min. 1600 - 4500 g/cm
- Start-up time/tempo change: less than 0.2 sec.
- Brake system: electronic brake
- Wow and flutter: 0.01% WRMS*
- S/N ratio: more than -55 dB (1 kHz, 4mV input)
- Admissible cartridge weight range: 3.5 - 8.5 g (incl. headshell 13 - 18 g)
- Anti-skating range: 0 - 3 g
- 2x start/stopp buttons
- Adjustable start/stop time (0.2 - 6 sec.)
- Power input: 14 W
- Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
- Dimensions: 458 x 144.6 x 354 mm
- Weight: 9.7 kg
- Incl. USB cable, slipmat, tone arm illumination, but without stylus and headshell
Impact of stylus, record and tone arm remain not taken into account.
| AT-LP120X
Manual Direct-Drive Turntable (Analogue & USB)
- Direct-drive, DC servo motor
- Fully manual operation
- Adjustable dynamic anti-skate control
- Selectable 33/45/78 RPM speeds
- Convert records to digital files via the USB output
- Professional anti-resonance, die-cast aluminium platter with felt mat
Cartridge & Stylus |
Replacement Stylus |
VM95 Series |
Turntable |
Type |
fully manual |
Motor |
DC servo-controlled |
Speeds |
33-1/3 RPM, 45 RPM, 78 RPM |
Pitch Variation |
+/-8% or +/-16% |
Turntable Platter |
Die-cast aluminum |
Starting Torque |
>1.0 kgf.cm |
Braking System |
Electronic brake |
Wow and Flutter |
50 dB |
Output Level |
Pre-amp "PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE”: 240 mV nominal at 1 kHz, 5 cm/sec |
Phono Pre-Amp Gain |
36 dB nominal, RIAA equalized |
USB Function |
PC or Mac with an available USB port (USB1.1 or higher)
Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above |
Power Supply Requirements |
115/230V AC, 60/50 Hz |
Power Consumption |
2.75 W |
Dimensions |
141,6 x 452 x 352 (H x W x D mm) |
Weight |
8.0kg |
Accessories Included |
AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2\') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter |
|
- Accurate playback
- Direct-drive motor
- Vertical tracking
- Adjustable insulator feet
- Solid construction
- Removable dust cover
General
- Colors Dark ebony
- Dimensions 500 x 394 x 185mm (W x D x H)
- Weight 18.5 kg
- Power Supply AC 100-240V, 50/60Hz
- Power consumption <4W
- Stdby Power consumption Less than 0.3W
- Carton maximum Dimensions 615 x 515 x 335 mm (W x D x H)
- Carton Weight 24.0 kg
- What's in the box Platter mat, Dust cover, Power cable, RCA cable and ground cable, Headshell, Overhang gauge, Screw set for cartridge mount (10, 13, 18mm), 2 x Cartridge spacers (1 mm), 2 x Plastic Washer, Screw driver, Counter weight, Sub-counter weight, Denon EP adapter/weight
| -Newly developed top panel and reinforced housing construction
-Reworked metallic buttons with improved feel & tactile response
-USB audio output for digitizing your records easily
- Newly developed top panel and reinforced housing construction
- Reworked metallic buttons with improved feel & tactile response
- Precision Pitch with selectable ranges of +/-8 %
- Superior finish in deep black metallic
- Quartz-driven DJ turntable with direct drive
- Perfect for beginners
- USB audio output for digitizing your records easily
- Precise motor control with 2 speeds selectable (33 1/3 & 45 rpm)
- Precision-engineered, die-cast aluminium platter with stable rotation
- Statically balanced s-shaped tone arm with hydraulic lift and anti-skating - mechanism
- Universal connection for pick-up systems (SME)
- Extendible needle illumination
- Built-in phono pre-amplifier (no grounding necessary)
- Switchable phono and line level output
- Shock-absorbing feet for vibration isolation
- Sturdy, heavy construction with optimized damping features
Turntable:
- Type: direct drive turntable
- Drive: quartz-driven direct drive
- Motor: 8-pol., 2-phase, brushless DC motor
- Turntable speeds: 2 speeds, manual (33 1/3, 45 RPM)
- Starting torque: > 1kg/cm
- Brake time: < 1 sec.
- Start-up / rpm change: < 1 sec.
Platter:
- Material: aluminium die-cast
- Diameter: 332 mm
Connections:
- 1x PHONO/LINE out (gold-plated)
Accessories included:
- Platter, OM Black pick-up system (by Ortofon), headshell, slipmat, counterweight, power cord,
operating instruction manual
|
| The AT-LP5 direct-drive turntable brings advanced technology and sleek, contemporary styling together for performance that looks as good as it sounds. Born of Audio-Technica’s rich analog heritage, the AT-LP5 incorporates a J-shaped tone arm that takes its inspiration from the classic A-T models of the 1960s and ’70s. The tone arm features a metallic gimbal suspension system and precision bearings to mitigate tracking errors, and includes an adjustable counterweight and anti-skate control. It comes outfitted with a lightweight (10 g) AT-HS10 headshell and high-performance AT95EX Dual Moving Magnet stereo cartridge, created specifically for this turntable.
Constructed of anti-vibration damping materials with heavy-mass metal chassis inserts, the AT-LP5 turntable is a class leader in limiting low-frequency acoustical feedback. Its precision-machined, die-cast aluminum platter is powered by a direct-drive, high-torque motor, ensuring stable, on-axis rotation at 33-1/3 or 45 RPM. The platter is topped by a 5 mm thick rubber damping mat that improves low-frequency reproduction.
The AT-LP5 features a built-in switchable phono/line preamp that enables it to be connected directly to a computer, home stereo, powered speakers and other components that have no dedicated turntable input. The turntable is also equipped with a USB output for direct connection to a computer, and comes with PC- and Mac-compatible Audacity® software that lets you convert your records to MP3, WAV or other digital audio file formats.
-
- Direct-drive, high-torque motor
-
- Fully manual operation with two speeds: 33-1/3 and 45 RPM
-
- Exclusive AT95Ex Dual Moving Magnet stereo cartridge with replaceable stylus
-
- Lightweight AT-HS10 headshell
-
- J-shaped tonearm, modeled after original Audio-Technica designs from the 1960s and ’70s, are engineered to minimize tracking errors
-
- Switchable built-in pre-amplifier enables connection to components with or without a dedicated phono input
-
- Anti-resonance, die-cast aluminum platter
-
- Heavy rubber damping mat for improved low-frequency reproduction
-
- Sleek, matte black finish
-
- Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, USB cable, and Audacity recording software for MAC or PC
- Included dust cover and mounting hardware
Type |
2-speed, fully manual operation |
Motor |
DC motor |
Drive Method |
Direct drive |
Speeds |
33-1/3 RPM, 45 RPM |
Turntable Platter |
Die-cast aluminum |
Starting Torque |
>1.6 kgf.cm |
Braking System |
Electronic brake |
Wow and Flutter |
50 dB |
Output Level |
Pre-amp "PHONO”: 3.5 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE” 150 mV nominal at 1 kHz, 5 cm/sec |
Phono Pre-Amp Gain |
36 dB nominal, RIAA equalized |
USB Function |
A/D, D/A - 16 bit 44.1 kHz or 48 kHz USB selectable;
Computer interface - USB 2.0 compliant Windows XP, Vista or MAC OS X |
Power Supply Requirements |
120V AC, 60 Hz |
Power Consumption |
11 W |
Dimensions |
450.0 mm (17.72“) W x 352.0 mm (13.86“) D x 157.0 mm (6.1“) H |
Weight |
10.5 kg (23.1 lbs.) |
Accessories Included |
AT95EX Dual Moving Magnet stereo cartridge with replaceable stylus; AT-HS10 lightweight headshell; power cord; dual RCA (male) to dual RCA (male) stereo cable; 45 RPM adapter; USB cable; recording software; cartridge alignment and overhang adjustment template; dust cover with mounting hardware |
|
Reviews
There are no reviews yet.