Content |
Reloop's Active PA Set stands for mobile sound quality. The heart of the entire independent PA system is the massive 600 watt subwoofer module which in addition to a 38 cm speaker also accommodates a perfectly modulated final amplifier including limiter and diplexer. The 'highlights' of the Reloop Active PA system are the two 150 watt satellites.
features:
- 600 watt RMS high-end active subwoofer satellite combination
- Set consists of:
1 x 300 watt RMS high-end active subwoofer
2 x 150 watt RMS high-end active satellites
2 x Aluminium loudspeaker stands
2 x PA professional speaker cables
1 x line cord
technical data:
Subwoofer:
- Type: active bandpass subwoofer
- Frequency range: 35 Hz - 250 Hz
- Acoustic pressure: 129 dB
- Speaker: 38 cm (15“) "Long-Throw" woofer
- Active electronic filter
- Integrated diplexer
- Opto limiter
- Dynaclip protective system
- Transportation wheels
- Carrying handles
- Inputs: 6.3 mm jack, XLR
- Outputs: PA professional speaker cables
- Dimensions: 447 x 542 x 640 mm
- Weight: 48.5 kg
Satellites:
- Type: active 2-way system
- Frequency range: 100 Hz - 18 kHz
- Impedance: 4 ohm
- Acoustic pressure: 119 dB
- Speaker: 20.3 cm (8“) mid/low-frequency speaker, 2.54 cm (1“) tweeter
- Connections: PA professional speaker cable
- Dynamic protective system
- Dimensions: 272.5 x 420 x 250 mm
- Weight: 10 kg | The ultra compact MAUI 5 weighs in at less than 11 kg while delivering 800 watts of peak power and a maximum SPL of 120 dB. Providing both sound reinforcement with extended coverage and feedback resistant monitoring the subwoofer base and 3-piece column system assembles in seconds with custom multipin connectors. The junior member of the MAUI family is most easily portable and fits onto any car seat.
The vented 8" subwoofer also houses the system's Class D amplification with overcurrent, short circuit and thermal protection, LD Systems' proprietary LECC digital processing and a 4-channel mixer. Featuring Bluetooth© technology for wireless streaming and microphone, line level and hi-Z inputs which can be used simultaneously the MAUI 5 lets you connect a wide variety of sources including music players and instruments such as keyboards or guitars. Individual level controls, subwoofer and master volumes plus high shelf filtering for room correction enable a perfectly balanced performance.
- Item Number: LDMAUI5
- Product Type: complete PA system
- Type: active
- Colour: black
- Max. SPL (continuous): 114 dB
- Max. SPL (peak): 120 dB
- Frequency Response: 50 - 20,000 Hz
- Dispersion Angle (H x V): 120° x 20°
- Total Height: 1985 mm
- Weight: 10.9 kg
- Other Features: DSP-based signal processing
- Woofer characteristics
- Woofer Size: 1 x 8“
- Woofer Size: 1 x 203.2 mm
- Woofer Magnet: ferrite
- Woofer Brand: custom-made
- Woofer Voice Coil: 2“
- Woofer Voice Coil: 50.8 mm
- Cabinet Type: bass reflex
- Cabinet Material: ABS
- Subwoofer Width: 305 mm
- Subwoofer Height: 405 mm
- Subwoofer Depth: 395 mm
- Mid/Hi System
- Midrange Size: 4 x 3“
- Midrange Size: 4 x 76.2 mm
- Midrange Magnet: neodymium
- Midrange Brand: custom-made
- Midrange Voice Coil: 1“
- Midrange Voice Coil: 25.4 mm
- Mid/Hi System Impedance: 4 ohm
- Speaker Inputs: 1
- Speaker Input Connections: custom-made multi-pin
- Mid/Hi System Cabinet Type: closed
- Mid/Hi System Cabinet Material: ABS
- Mid/Hi System Cabinet Surface:
- Mid/Hi System Width: 82 mm
- Mid/Hi System Height: 535 mm
- Mid/Hi System Depth: 105 mm
- Amplifier Module (integrated in subwoofer)
- Amplifier: class D
- Amplifier Power System (RMS) 200 W
- Amplifier Power System (peak): 800 W
- Protection Circuits: DSP-based multiband limiter, overvoltage, short circuit, overcurrent
- Cooling System: convection
- Controls: Sub Level, MP3/Hi-Z Level, Main Level, Line Level, Mic Level, BT Level, BT Pairing Button
- Display Elements: Signal, On, Limit, Protect
- Power Supply: switching power supply
- Operating Voltage: 100 V AC - 120 V AC / 50 - 60 Hz, 200 V AC - 240 V AC, 50 - 60 Hz (automatic adjustment)
- Line Inputs: 2 x stereo
- Line Input Connectors: XLR, 6.3 mm jack
- Mic Inputs: 1
- Mic Input Connectors: XLR, 6.3 mm jack
- MP3 Inputs: 1
- MP3 Input Connectors: 3.5 mm jack
- Hi-Z Inputs: 1
- Hi-Z Input Connectors: 6.3 mm jack
- Speaker Outputs: 1
- Speaker Output Connections: custom-made multi-pin
- DSP Features
- Word Length AD / DA Converter: 24 / 24 Bit
- Internal Sampling Frequency: 48 kHz
|
400-watt, portable PA system with 8-channel powered mixer, two 8" speakers, a Bluetooth® input, SPX digital reverbs, an onboard feedback suppressor and versatile EQ.
Spacifications :
- 400W (200W + 200W) power output
- High quality speakers (LF:8" woofer/ HF:1" voice coil compression driver)
- Detachable 8-channel mixer (4 mono/line + 4 mono / 2 stereo line)
- Bluetooth® audio streaming
- 1-Knob Master EQ™ with virtual bass boost
- High resolution SPX digital reverbs (4 types, parameter control)
- Onboard feedback suppressor
- Great-sounding 2-band channel EQ
- Switchable stereo/ mono inputs
- Hi-Z (high impedance) inputs
- Phantom power
- Monitor and Subwoofer outputs
- Optional reverb footswitch
(Speakers): |
x 2 |
Τype: |
2 passive speakers |
Woofer: |
8" (20 cm) cone |
Cone: |
1" (2.54 cm) voice coil compression driver |
Enclosure: |
Two-way bass-relfex speakers |
Frequency Range: |
55 Hz - 20 kHz |
Dimensions: |
Speaker 28.9 x 47.2 x 27.5 cm. |
Weight: |
2 x Speakers 7.7kg |
Type: |
Powered mixer |
Power: |
400W (200 W + 200 W) (Dynamic), 360W (180W + 180W) (Continuous) |
Inputs/Outputs: |
4 mono mic / line + 4 mono / 2 stereo line - Speakers Out(L, R), Monitor Out(L/MONO, R), Subwoofer Out (MONO) with auto HPF |
Channels: |
Mixing channels 8 |
Equalizer: |
High Shelving: 8 kHz / Low Shelving: 100 Hz |
Effects: |
SPX digital reverb (4 program, parameter control) |
Phantom Power: |
+30V (CH1, 2) |
Dimensions: |
30.8 x 18.0 x 11.6 εκ. |
Weight: |
2.9kg |
|
LD Systems DAVE 12 G3 - Active PA-System with DSP
The new LD Systems DAVE 12 G3 is the perfect active PA system for high-powered live gigs, multimedia presentations, and permanent installations in bars and clubs. A 12" bass reflex subwoofer and the satellites with 6.5" drivers and HF horns ensure a good sound with driving, defined bass, natural mids, and clear treble. The 2.1 power amp stage is built into the subwoofer and provides the system components with 2000 W Peak power.
The soul of the DAVE 12 G3 is the LD LECC DSP digital signal processor, which controls all important system functions. It includes specially amplitude and low-latency optimised crossovers, separate equalisers and limiters for the bass, mid, and treble frequency ranges, and a dynamic compressor that controls the subwoofer according to volume and provides for increased punch at low volumes.
The professional full range of features of the DAVE 12 G3 includes sturdy multiplex cabinets, all important protection circuits, RCA, XLR/jack combo and Speakon-compatible connectors, and ergonomically shaped, recessed handles. The LD "Evolutive" handles of the subwoofer are an important innovation with a metal ring handle that permits a secure and convenient grip from all sides. For accurate vertical orientation of the satellites, the speaker supports are vertically adjustable by ± 13,5° max. in seven increments.
Protection covers for the system components and a castor board with a lashing strap for easy transport are available as accessories. Matching speaker stands, spacer tubes, and mounting forks are also available separately.
The DAVE 12 G3 system is ideally suited for portable use and also makes a great impression in permanent installations.
Product type
PA Complete Systems
Colour
Black
Max. SPL (continuous)
119 dB
Max. SPL (peak)
130 dB
Frequency response
40 - 19000 Hz
Dispersion (H x V)
90 x 40 °
Weight
48,5 kg
Subwoofer
Low/mid driver dimensions
12 "
Woofer size
304.8 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2.5 "
Woofer voice coil (mm)
63.5 mm
Cabinet construction
vented
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Subwoofer width
435 mm
Subwoofer height
500 mm
Subwoofer depth
540 mm
Subwoofer features
LD Systems "Evolutive" handles , threaded flange M20
Mid/Hi System
Midrange size
6.5 "
Midrange size
165.1 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Midrange voice coil
1.75 "
Midrange voice coil
44.5 mm
Horn
CD horn
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Mid/Hi system impedance
4 Ohm(s)
Loudspeaker inputs
1
Speaker input connections
Speakon compatible
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
15 mm Plywood
Mid/Hi system cabinet surface
texture paint
Mid/Hi system width
250 mm
Mid/Hi system height
400 mm
Mid/Hi system depth
250 mm
Mid/Hi system features
ergonomically shaped insert handles , SM707 stand mount 36 mm
Amplifier module (integrated in subwoofer)
Amplifier
Class A/B
Amplifier output system (RMS)
500 W
Amplifier output system (peak)
2000 W
Protection circuits
limiter , overload , short circuit
Cooling
volume-controlled fan
Controls
Power , Sub level , Subwoofer Phase Reverse , volume
Indicators
Limit , on/off , Protect (protection circuit engaged) , Signal
Operating voltage
transformer
Operating voltage
220 V AC - 240 V AC
Line inputs
2
Line input connectors
6.3 mm jack , RCA , XLR
Line output connectors
XLR
Loudspeaker outputs
2
Speaker output connections
Speakon compatible
Internal sampling frequency
1000 kHz
| Delivering a massive low-end with punch and clarity, this set is ideal for outdoor sound reinforcement. With a quartet of subwoofers and two 15” tops, it easily covers medium-sized gigs at town fairs, street festivals and in marquees. We recommend this set for the following type of application: DJ, outdoor sound reinforcement for bands. The STINGER G3 IMPACT SET A is suitable for audiences of up to 400* pax. For optional stands and cables check out the "related products" section.
Set consisting of:
2 x STINGER 15 A G3 – 15” Powered loudspeaker
4 x STINGER SUB 18 A G3 – 18” Powered subwoofer
2 x STINGER 15 G3 PC – Padded protective cover for loudspeaker
4 x STINGER SUB 18 G3 PC – Padded protective cover for subwoofer
4 x STINGER SUB 18 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment.
Specifications
General
System output (RMS):
3,400 W
Frequency response
35 – 20,000 Hz
Dispersion (H x V)
90 x 50°
Items in this set
LD Systems STINGER SUB 18 G3 PC Padded protective Cover for Stinger® G3 Subwoofer 18"
Product type
PA Subwoofer Accessories
Thickness of the padding
8 mm
LD Systems STINGER SUB 18 G3 CB Dolly Board for Stinger G3 Subwoofer 18" Models
Product type
PA Complete Systems Accessories
Manufacturer of castors
Adam Hall
LD Systems STINGER 15 A G3 Active 15" 2-way bass-reflex PA Loudspeaker
Product type
PA loudspeaker
Low/mid driver dimensions
15 "
Woofer voice coil (mm)
76.2 mm
Horn
BEM optimized CD Horn
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50 °
Frequency response
50 - 20000 Hz
Protection circuits
Multiband limiter, over-current, thermal overload
Controls
2 x gain, 2 x Mic/Line
Line input connectors
6.3 mm jack, XLR
Operating voltage
Switching power supply
Cabinet material
15 mm Plywood
LD Systems STINGER 15 G3 PC Padded protective Cover for Stinger® G3 PA Loudspeaker 15"
Product type
PA Loudspeakers Accessories
LD Systems STINGER SUB 18 A G3 Active 18" bass-reflex PA subwoofer
Product type
PA subwoofer
Low/mid driver dimensions
18 "
Woofer voice coil (mm)
101.6 mm
Input impedance
30000 Ohm(s)
Frequency response
35 - Low-Pass Hz
Line input connectors
6.3 mm jack, XLR
Line output connectors
XLR
Protection circuits
DC, limiter, over voltage, short circuit
Power consumption (max.)
600 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 80% (non-condensing)
Cabinet construction
Bass Reflex
Controls
Main level, Mode
Indicators
Limit, Mode, On, Protect (protection circuit engaged), Signal
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching), SMPS
Cabinet material
18 mm Plywood
|
User´s Manual
LD Systems MAUI 28 G2 W
Compact Column A System with Mixer and Bluetooth white
- All-in-one column speaker for PA and monitor applications
- 2,000 watts peak Class-D system power offer high performance with a low weight
- Powerful bass reproduction with 2 x 8" woofers
- Balanced mids thanks to the 16 x 3" full-range speakers
- Precise and silky highs with 2 x 1" high-frequency drivers
- Increased range and wider coverage through the array arrangement
- Homogeneous dispersion pattern through a BEM-optimised tweeter wave guide
- Distortion-free sound even at the highest volume thanks to LD Systems DynX® DSP technology
- Full control through a 4-channel mixer including Bluetooth® Stereo Audio Streaming
- Two-piece column for compact transport
- Secure plug-and-play connection thanks to the wireless multi-pin mechanism
- A wide range of application options through dismountable columns
- Easy operation with presets for mono or stereo configuration
- Extensive and smart accessories for installation and transport
A complete sound system that you can carry together with your instrument: introducing the MAUI 28 G2. The two column elements in the padded shoulder bag, the subwoofer in one hand and the guitar or keyboard in the other - and off you go! Setting up the complete system, which doubles as PA and monitor system is just as easy thanks to the special multi-pin cable plugs. The compact and elegant MAUI 28 G2 offers an unbeatable sound quality and wide-ranging sound distribution. It was developed with year-long experience in the design of the column systems as a user-friendly solution for medium sized gigs and fixed installations.
The MAUI 28 G2 is equipped with two 8" woofers, sixteen 3" full-range speakers and two 1" neodymium HF drivers. They are driven by a light Class-D power amplifier with an enormous 2,000 watts peak power and produce a grunty bass, balanced mids and precise and silky highs. The DynX® DSP technology from LD Systems provides a top-class performance every time and the highest level of freedom from distortion. It includes a multiband limiter which protects against overloading, an EQ, a compressor and a 3-way crossover with run time correction.
The design of the MAUI 28 G2 line array achieves a longer range, increased resistance to feedback and a wider space coverage, which makes separate monitor speakers superfluous. The wave guide of the tweeters has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves an homogeneous dispersion - Your audience hears you in the back row just as clearly as in the front.
With the integrated 4-channel mixer, system presets for mono or stereo configuration and Bluetooth® Audio Streaming, you have full control over the system. Whether you are a singer-songwriter, solo entertainer, DJ or musician in a small band, you will be thrilled with the extraordinary sound and portability of the MAUI 28 G2. The column and the subwoofer can be set up separately: thus, the system is extremely flexible and is also an excellent choice for fixed installations. With a selection of clever transport accessories and special mounting hardware, the MAUI 28 G2 is a well thought out overall solution, down to the last details.
Product type
PA Complete Systems
Type
active
Colour
Black
Max. SPL (peak)
126 dB
Frequency response
45 - 20000 Hz
Dispersion (H x V)
120° x 20 °
Overall height
2059 mm
Weight
30,9 kg
Woofer characteristics
Low/mid driver dimensions
2 x 8 "
Woofer size
2 x 203 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Cabinet construction
vented
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Subwoofer width
370 mm
Subwoofer height
484 mm
Subwoofer depth
480 mm
Subwoofer weight
19.7 kg
Mid/Hi System
Midrange size
16 x 3 "
Midrange size
16 x 76.2 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Midrange voice coil
1 "
Midrange voice coil
25.4 mm
Horn
Waveguide
Tweeter dimensions
2 x 1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Neodymium
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Loudspeaker inputs
1
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
aluminium
Mid/Hi system cabinet surface
HD coating
Mid/Hi system width
96 mm
Mid/Hi system height
780 / 795 mm
Mid/Hi system depth
104 mm
Mid/Hi system weight
5.6 / 5.6 kg
Amplifier module (integrated in subwoofer)
Amplifier
Class D
Amplifier output system (RMS)
1000 W
Amplifier output system (peak)
2000 W
Protection circuits
DC protection , Multiband limiter , short circuit , thermal overload
Cooling
Convection
Operating Temperature
0 - 40 °C
Humidity Range
10% to 80%, (non-condensing)
Controls
Bluetooth switch , Hi-Z Level , Line level , Main level , Mono/stereo switch , MP3/Bluetooth Level , Power , Sub level
Indicators
Limit , mono , On , Protect (protection circuit engaged) , Setup , Signal , stereo
Power connector
IEC power cable (included)
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Power consumption Off / On / Max.
0/11/600 W
Line inputs
2 x stereo
Line input connectors
RCA , XLR/6.3 mm jack
Line outputs
2 (1x System Out, 1x Sub Out)
Line output connectors
XLR
Mic inputs
1
Mic inputs
XLR/6.3 mm jack
MP3 inputs
1
MP3 input connectors
3.5 mm jack
Hi-Z inputs
1
Hi-Z input connectors
6.3 mm jack
Loudspeaker outputs
1
Speaker output connections
Custom-made multipin
DSP characteristics
Bit depth AD/DA converter
24 bit
Internal sampling frequency
48 kHz
Signal/noise ratio
100 dB
|
Reviews
There are no reviews yet.