RODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE

188.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones. Now available as the \’Complete Vocal Recording Solution\’ this NT1-A package now includes everything you need to get truly professional vocal recordings – the world\’s quietest […]

 

Read more

The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones.

Now available as the \’Complete Vocal Recording Solution\’ this NT1-A package now includes everything you need to get truly professional vocal recordings – the world\’s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\’ cable, dust cover, an instructional DVD with recording tips, and of course R DE\’s industry leading ten year warranty.

  • Large 1″ (25mm) capsule with gold plated diaphragm
  • Cardioid polar pattern
  • Self noise of only 5dB (A)
  • Ultra low noise, transformerless surface mount circuitry
  • Wide dynamic range
  • Gold plated output contacts
  • True condenser (externally biased)
  • Internal capsule shock mounting

Microphone Impedance: 100 Ohms Microphone Dynamic Range: > 132dB (per IEC268-15) Microphone Sensitivity: -31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) Microphone Diameter: 50mm Microphone Powering: +48 Volts (Phantom Power) Physical Weight: 326.00g

Frequency Curve Image:

Weight 3.00 kg

Reviews

There are no reviews yet.

Be the first to review “RODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE”

Your email address will not be published. Required fields are marked *

Quick Comparison

RODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE removeBEHRINGER B-5 Sputtered Diaphragm Studio Condenser Microphone removeNEUMANN TLM-103 Condenser studio microphone removeRODE NTK TUBE CONDENSER STUDIO MICROPHONE removeAKG PERCEPTION 120 Condenser microphone removeAKG PERCEPTION 220 CONDENSER MICROPHONE remove
NameRODE NT-1A STUDIO CONDESER MICROPHONE BUNDLE removeBEHRINGER B-5 Sputtered Diaphragm Studio Condenser Microphone removeNEUMANN TLM-103 Condenser studio microphone removeRODE NTK TUBE CONDENSER STUDIO MICROPHONE removeAKG PERCEPTION 120 Condenser microphone removeAKG PERCEPTION 220 CONDENSER MICROPHONE remove
Image
SKUH11RD00025E005243H11NE00039H11RD00012PERCEPTION 120PERCEPTION 220
Rating
Price 188.00 incl. GR VAT 80.00 incl. GR VAT 1,169.00 incl. GR VAT 599.00 incl. GR VAT 110.00 incl. GR VAT 180.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

In stock

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones. Now available as the \'Complete Vocal Recording Solution\' this NT1-A package now includes everything you need to get truly professional vocal recordings - the world\'s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\' cable, dust cover, an instructional DVD with recording tips, and of course R DE\'s industry leading ten year warranty.
  • Large 1" (25mm) capsule with gold plated diaphragm
  • Cardioid polar pattern
  • Self noise of only 5dB (A)
  • Ultra low noise, transformerless surface mount circuitry
  • Wide dynamic range
  • Gold plated output contacts
  • True condenser (externally biased)
  • Internal capsule shock mounting
Microphone Impedance: 100 Ohms Microphone Dynamic Range: > 132dB (per IEC268-15) Microphone Sensitivity: -31.9dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) Microphone Diameter: 50mm Microphone Powering: +48 Volts (Phantom Power) Physical Weight: 326.00g Frequency Curve Image:

Behringer B-5 Sputtered Diaphragm Studio Condenser Microphone



The B-5 is a professional gold-sputtered diaphragm condenser microphone featuring two interchangeable capsules for different pickup patterns (cardioid and omnidirectional). It is perfect for acoustic instruments, vocals and overhead miking. Its ultra low-noise transformerless FET input eliminates low frequency distortion. The -10 dB attenuator can be used with high volume signal sources, while the low-cut filter eliminates floor rumble. The microphone is delivered in a rugged hard case with stand adapter and windscreen.

 

Professional true condenser microphone for studio and live applications
2 interchangeable capsules with cardioid and omnidirectional pickup patterns
Low-mass gold sputtered diaphragm for ultimate sound reproduction
Perfect for acoustic instruments, voice and overhead etc.
Ultra low-noise transformerless FET input eliminates low-frequency distortion
Smooth, super-wide frequency response and incredible musicality
Switchable low-frequency roll-off and -10 dB input attenuation
Gold-plated 3-pin XLR output connector
Rugged construction with satin nickel-plated brass body
Custom microphone stand adapter, windscreen and transport case included

 

 

 

Manual Download

Large diaphragm cardioid microphone
Pressure gradient transducer with with one-diaphragm capsule
Transformerless circuitry
Extremely low noise: 7 dB-A
Includes swivel mount
Straightforward handling for homerecording and professional studios

High-quality professional equipment for limited budgets

Acoustical operating principle Pressure gradient transducer
Directional pattern Cardioid
Frequency range 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm 23 mV/Pa
Rated impedance 50 ohms
Rated load impedance 1 kohms
Equivalent noise level, CCIR1) 17.5 dB
Equivalent noise level, A-weighted1) 7 dB-A
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) 76.5 dB
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) 87 dB
Maximum SPL for THD 0.5%2) 138 dB
Maximum output voltage 13 dBu
Dynamic range of the microphone amplifier (A-weighted) 131 dB
Supply voltage (P48, IEC 61938) 48 V ± 4 V
Current consumption (P48, IEC 61938) 3 mA
Matching connector XLR3F
Weight approx. 450 g
Diameter 60 mm
Length 132 mm

 

Rode's new NTK has the quality and warmth demanded from a tube mic.
With the large 1 in. capsule gold-plated membrane and twin triode tubes
(hand graded and selected), Rode is again setting the standard for value.
This is a tube mic designed exclusively for recording professionals who
want what only the best can offer.

Features:
Dynamic range of 47dB
Ultra low noise of only 12dB
Internal capsule shock mounting
Cardioid polar pattern
20Hz - 20kHz frequency response
Includes a power supply, 30 ft. cable, and stand adapter

Technical Description:
Capsule: Externally polarised 1 in. pressure-gradient condenser
Active Electronics: Unity-gain closed-loop impedance converter;
vacuum-tube input with bipolar buffering
Pickup Pattern: Cardioid
Frequency Response: 20Hz - 20kHz (+/-6dB)
Output Impedance: 200 ohms (100 ohms per leg)
Sensitivity: -38dB re 1V/Pa (12mV @ 94dB SPL) +/-1dB
Equivalent Noise: 12dB SPL (A-weighted per IEC268-15) +/-2dB
Maximum Output: > +29dBu (@ 1kHz, 5% THD into 1k (load)
Dynamic Range: > 147dB (A-weighted, per IEC268-15)
Maximum SPL: > 158dB SPL (@ 1kHz, 5% THD into 1k (load)
Signal/Noise Ratio: > 82dB (A-weighted, per IEC268-15)
External power supply: 100-120V/200-240V AC (user selectable)
50Hz/60Hz, 25VA maximum
Packed Weight: 4.53 kg (Mic only 760 gm)

Accessories included:
Power Supply
30 ft (10 m) Multicore Cable
M2 Standmount plus 3/8-5/8 in. Thread Adapter
Optional Extras: SM2 Shockmount

Live sound
Podcasting Home recording Vocals Musical instruments Perception 120
  • General-purpose cardioid recording microphone
  • Extended frequency response
  • Roadworthy construction
  • Switchable 20 dB preattenuation pad
  • Switchable bass cut filter
  • Designed and engineered by AKG in Vienna, Austria
The Perception 120 is a 2/3-inch diaphragm true condenser microphone that offers solid build quality, outstanding performance, and excellent value. The low-mass diaphragm delivers a clear sound with accurate sonic detail. A switchable 20 dB preattenuation pad and bass cut filter make the Perception 120 an excellent choice for a wide range of recording and live sound applications. Backed by AKG\'s six decades of experience in making microphones and input from sound engineers around the world, the Perception 120 now brings AKG studio quality to musicians and project studio applications.
Type 2/3\" Diaphragm True Condenser
Polar pattern cardioid
Frequency range 20 to 20,000 Hz
Sensitivity 22 mV/Pa (-33 dBV)
Max. SPL 130/150 dB (0/-20 dB) for 0.5% THD
Equivalent noise level 22 dB-A (IEC 60268-4)
Signal/noise ratio (A-weighted) 72 dB
Preattenuation pad 0 dB, -20 dB
Bass filter 12 dB/octave at 300 Hz
Impedance
Recommended load impedance >= 1,000 ohms
Powering
Power requirement 48 V phantom power to DIN/IEC
Connector 3-pin XLR
Finish metallic blue
Dimensions 53 dia. x 165 mm (2.1 dia. x 6.5 in.)
Net weight 525 g (18.5 oz.)
Shipping weight 955 g (33.7 oz.)
  • One-inch large-diaphragm, true condenser cardioid transducer
  • Rugged all-metal body
  • Roadworthy construction
  • Switchable 20 dB preattenuation pad
  • Switchable bass cut filter
  • Legendary AKG sound quality
  • Designed and engineered by AKG in Vienna, Austria
  • Comes with spider-type shock mount and aluminium carrying case
The Perception 220 is a large-diaphragm true condenser microphone offering outstanding build quality and excellent value. Its many useful features and included accessories make this microphone uncommonly versatile. It delivers a classic warm, clear sound and conforms to the stringent standards defined for AKG recording products. These standards are based on AKG΄s six decades of experience in making microphones and on input from sound engineers around the world who use AKG products every day. Its 1-inch large-diaphragm true condenser transducer brings AKG studio quality to the project studio as well as all other areas of recording and live sound applications. A switchable bass cut filter and preattenuation pad make it perfectly suited even for use on loud sound sources producing sound pressure levels up to 155 dB SPL. The rugged and roadworthy design makes it also a perfect choice for on-stage applications. The Perception 220 comes with a spider-type shock mount and a rugged metal case.
Type 1" Large Diaphragm True Condenser
Polar pattern cardioid
Frequency range 20 to 20,000 Hz
Sensitivity 18 mV/Pa (-35 dBV)
Max. SPL 135 dB/155 dB (0/-20 dB) for 0.5% THD
Equivalent noise level 16 dB-A (IEC 60268-4)
Signal/noise ratio (A-weighted) 78 dB
Preattenuation pad 0 dB, -20 dB
Bass filter 12 dB/octave at 300 Hz
Impedance =1000 ohms
Current consumption
Weight3.00 kg0.40 kg3.00 kg2.00 kg0.50 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.00 kg
Weight 0.40 kg
Weight 3.00 kg
Weight 2.00 kg
Weight 0.50 kg
Weight 1.00 kg