| Content | Dynamic largemembran-Microphone forBroadcast- and Syncronize-Studios and professionalPodcasting, internal Pop-Filter, Neodym Large membranCapsule (28 mm) cardiod, 40 Hz - 14 kHz, 115 dB SPL, Weight: 1.025g, Lenght: 215 mm, 520 mm diameter | · ON-OFF switch
· Male XLR connector
· Anthracite grey body
· Black mesh and antipop filter
· High performance
· High-quality voice reproduction
· Low distortion
· High resistance to knocks
· Special cartridge suspension mount t o isolate the microphone from handling noise
· Ideally suited for singing applications
| Code |
10042 |
| Characteristics |
Dynamic |
| Directivity |
Hyper Cardioid |
| Frequency response |
50÷13 kHz |
| Sensitivity (OdB-1V/micro bar,1000 Hz) |
-72dB±3dB |
| Output impedance |
250 Ohm |
| Material |
Zamak |
| Weight |
359 g |
| Dimensions |
ø 54x187 mm |
| Accessories included |
Stand SU30 |
| Microphone cables (optional) |
CI-M 5 X |
|
CI-M 5 D |
|
CI-M 5 J |
|
- Supercardioid Polar Pattern
- Laminated Varimotion Diaphragm
- Integrated 80 Hz High-Pass Filter
- Integrated Hum-Compensating Coil
- WARRANTY FROM THE OFFICIAL GREEK AKG DISTRIBUTOR
The AKG D7 is a reference handheld dynamic vocal microphone designed to capture vocals and instruments with condenser-like sound for artists and audio engineers in clubs, concert venues, and houses of worship. The laminated dual-layer Varimotion diaphragm exhibits a supercardioid polar pattern for excellent off-axis rejection of audio across the frequency spectrum. This allows high gain before feedback and reduced stage bleed through the mic. Handling noise is minimized by the mechano-pneumatic capsule suspension and an integrated 80 Hz high-pass filter.
Thanks to a 70 Hz to 20 kHz frequency response and a maximum SPL of 147 dB, the D7 delivers detailed sound even on the loudest sources. A hum-compensating coil is incorporated to help reduce interference from electrical devices and to ensure that your captured sound comes through with minimal noise.
In addition, the heavy-duty die-cast chassis with a dent-resistant grille is built rugged to withstand the rigors of daily use. An XLR connector utilizing gold-plated pins ensures signal transfer with maximum conductivity. A padded zip case, SA 61 stand adapter, and a replacement inner windscreen are included.
Dual-Thickness Varimotion Diaphragm
Provides a subtle and open sound in all frequency ranges
Feedback Suppression
The laminate diaphragm material damps critical resonance peaks
Integrated Hum-Compensating Coil
Provides a crisp and a cleaner sound
Precision Metal Dust Filter
Protects the capsule from sound-changing pollution
Mechano-Pneumatic Suspension
Effectively eliminates unwanted handling noises
Microphone
| Sound Field |
Mono |
| Operating Principle |
Pressure Gradient |
| Capsule |
Dynamic |
| Polar Pattern |
Supercardioid |
| Circuitry |
Solid-State |
| Pad |
None |
| High-Pass Filter |
80 Hz |
Performance
| Frequency Range |
70 Hz to 20 kHz |
| Maximum SPL |
147 dB SPL |
| Impedance |
600 Ohms |
| Load Impedance |
2000 Ohms |
| Sensitivity |
2.6 mV/Pa |
| Signal-to-Noise Ratio |
76 dB A-Weighted |
| Equivalent Noise Level |
18 dB A-Weighted |
Connectivity
| Output Connectors |
1 x XLR 3-Pin |
Physical
| Dimensions |
ø: 2.01 x L: 7.28" / ø: 51 x L: 184.91 mm |
| Weight |
11.29 oz / 320 g |
| By virtue of its design and features, the MD 431 II ranks amongst Sennheiserʼs most exceptional microphones and is suitable for vocal, speech and broadcasting applications. Colour: black, sound inlet basket: refined steel.
Pick-up pattern : super-cardioid
Sensitivity in free field, no load : (1kHz) 2,0 mV/Pa +- 3 dB
Nominal impedance : 250 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : d 49 x 200 mm, Griff d 31 mm
Weight :ca. 250 g |
- Tailored for Vocals & Speech
- Cardioid Polar Pattern
- Shock-Mounted Dynamic Cartridge
- 50 Hz to 15 kHz Frequency Response
The Shure 55SH Series II is a Unidyne cardioid dynamic microphone boasting a classic look and vocal-tailored sound for recording sessions, live stage applications, and on-camera use. The dynamic cartridge is shock-mounted to impede handling noise and vibrations transferred through your mic stand. The implementation of a cardioid polar pattern minimizes pickup of off-axis noise and ambience, yielding higher gain before feedback and attenuated stage bleed.
The mic delivers a frequency response of 50 Hz to 15 kHz with a gentle presence boost peaking at approximately 6.5 kHz. Its XLR 3-pin output ensures compatibility with most mixer inputs, microphone preamps, and portable PA systems. An on/off switch is provided for convenient muting of the mic between speeches or performances. The attached, self-tensioning, 5/8“-27 thread swivel mount can be tilted up to 45 degrees forward and 80 degrees backward. Chrome die-cast metal construction provides tour-worthy durability.
Classic Appearance
In addition to being a mic with solid audio characteristics for the studio and stage, the 55SH Series II makes a great prop microphone in video shoots, photos, and theater applications
Tailored Frequency Response
The 50 Hz to 15 kHz frequency response features a slight dip in the low-mid frequency range and a gentle rise from 1 to 10 kHz, making its sonic performance optimized for vocals, public address, and dialog
Cardioid Polar Pattern
The cardioid polar pattern is effective in minimizing sound pickup at the off-axis sections of the capsule, ensuring high gain before feedback
Shock-Mounted Cartridge
The dynamic capsule is shock-mounted for added protection against shock- and structure-born noise
Shure 55SH II Specs
Microphone
| Sound Field |
Mono |
| Operating Principle |
Pressure Gradient |
| Capsule |
Dynamic |
| Polar Pattern |
Cardioid |
| Circuitry |
Solid-State |
| Pad |
None |
| High-Pass Filter |
None |
Performance
| Frequency Range |
50 Hz to 15 kHz |
| Impedance |
270 Ohms |
| Sensitivity |
-58 dBV/Pa at 1 kHz |
Connectivity
| Output Connectors |
1 x XLR 3-Pin |
Physical
| Dimensions |
ø: 3.06 x L: 7.4" / ø: 77.8 x L: 188 mm |
| Weight |
1.37 lb / 0.62 kg |
|
Offered in a convenient and cost-effective "three-pack," the Q6 gives you plenty of output and performance for a variety of situations.
3 Mics in a Foam Padded Hard Shell Case
High gain, low impedance design
Dynamic Neodymium mic element
Super Cardioid pickup pattern
Multi-axis shock mounted element
On/Off Switch
Hard Shell Carry Case for 3 mics
(3) Mic Clips included
|
Reviews
There are no reviews yet.