Content |
This product, like the VideoMic (VM), now the worldʼs biggest selling on camera shotgun microphone, is also destined to become an Industry standard and not only offers the same sound quality & performance as itʼs predecessor, but also meets the industry demand for stereo recording.
Now videographers may use true ʽstudioʼ stereo recording techniques in the field with ease. The X/Y configuration enables the SVM to capture the true ambience of the recording space, while still offering a high level of rear rejection and low noise.
Fitted with a shoe mount, the SVM has the same low noise circuit design as the VM. The SVM offers 9V battery operation, an LED battery status indicator, a high pass filter switch, and a -10dB pad switch which allows for the mic to be used on most cameras with perfect level control.
You can also use the SVM as a remote mic on a stand, or a RØDE boom pole (Optional Accessory), which truly makes this versatile product well suited for all video applications including Electronic News Gathering (ENG), Weddings, Sports Events & Interviews.
Rode Stereo Video Mic Features - Stereo X/Y condenser microphone
- Broadcast sound quality
- Two stp high-pass filter - flat or 80 Hz
- Rugged cast aluminum body
- 9V battery operation
- Custom designed integral windshield
- Low noise circuitry
- Low handling noise
- Integral camera-shoe mount
- Includes Dead Kitten windscreen
- Acoustic Principle: Pressure Gradient
- Directional Pattern: Super Cardioid
- Frequency range: 40 Hz - 20 kHz
- Output Impedance: 200 Ohms
- Signal/Noise Ratio: 74 dB SPL (A - weighted per IEC651)
- Equivalent Noise: 20 dB SPL (A - weighted per IEC651)
- Maximum SPL: 134 dB (@ 1kHz, 1% THD into 1 Ohm load)
- Sensitivity: -38 dB re 1Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Power (Supply voltage): 7 mA, 9 V DC Alkaline Battery, (NSI: 1604A or IEC:6LR61)
- Battery Life: 60+ hours
- Output Connection: Stereo mini jack plug - ø3.5mm (Right Channel - Ring, Left Channel - Tip)
- Dimensions (WxHxD): 6.75 x 3.9 x 2.5 Inches (172 x 100 x 64 mm)
- Weight: .72 lbs (330 grams)
| Broadcast sound quality
Low noise circuitry
Internal rechargeable lithium battery, supplying over 150 hours operation
Fully charged in under two hours via MicroUSB
Rugged metal construction
Convenient digital switching
High Frequency Boost
High Pass Filter (Flat/75Hz)
PAD (-10db)
MicroUSB cable included
Ten year extended warranty with online registration
Building on the popularity and acceptance of the RØDE NTG2, the NTG4+ features an all-new condenser capsule with low noise, high sensitivity and the convenience of on-board equalisation/level control via digital switching.
The NTG4+ is the very first microphone to feature an in-built battery that provides 150+ hours of operation with the convenience of USB charging.
Visit the NTG4+ feature page
NTG4+ Specifications
Acoustic Principle Line Gradient
Capsule 0.50“
Polar Pattern Supercardioid
Address Type End
Frequency Range 20Hz - 20kHz(selected HPF @75Hz)
Output Impedance 200Ω
Maximum SPL 135dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 16dB-A
Power Options +12V phantom power+24V phantom power+48V phantom powerInternal battery
Weight 176gm
Dimensions 278mmH x 22mmW x 22mmD
Output XLR Output
Warranty 1 year with free extension to 10 years following registration |
he PRO24-CMF camcorder microphone is a lightweight, compact stereo condenser ideal for digital recording with high-fidelity stereo sound. Equipped with a windjammer, accessory shoe and permanently attached coiled cable, the microphone features a pair of cardioid elements in an X-Y configuration to provide the spatial impact and realism of a live sound field. The microphone is designed for either battery operation or battery-free operation when used with camcorders that provide plug-in power at the mic input. Like all Audio-Technica mics, the PRO24-CM is rugged; it's built to endure the rigors of field production. - Stereo microphone designed to attach to a camcorder
- For camcorders with an accessory shoe and stereo microphone input
- Lightweight, portable design with rugged all-metal construction
- Pair of cardioid condenser elements provides spatial impact and high-fidelity stereo sound image
- Battery-free operation when used with recording devices that provide plug-in power at the mic input
- On/off switch for convenient operation
- Includes camera-mount, windscreen, windjammer, battery and protective pouch
- Permanently attached 6""-12“" coiled cable with right-angle molded 3.5 mm stereo mini plug at output end
Polar Pattern: X/Y Stereo
Frequency Response: 100-17,000 Hz
Open Circuit Sensitivity: -50 dB (3.1 mV) re 1V at 1 Pa
Impedance: 600 ohms
Maximum Input Sound Level: 119 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 82 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 57 dB, 1 kHz at 1 Pa
Battery Type: 1.5V LR44
Battery Current Life: 0.6 mA / 200 hours typical
Switch: On/off
Weight: 3.9 oz (111 g)
Dimensions: 4.59“" (116.5 mm) long, 0.83" (21.0 mm) maximum body diameter
Output Connector: 3.5 mm stereo mini plug on cable
Cable: Permanently attached 152.4 mm - 304.8 mm (6""-12"") coiled cable with right-angle molded 3.5 mm stereo mini-plug at output end
Accessories: Video-camera shoe mount; LR44 battery; windscreen; Fur windjammer AT8123 and soft protective pouch
|
The MD 46 is a high-quality reporter's microphone with cardioid pick-up pattern. It has been specially optimised for rough use in live reporting and broadcasting environments. The MD 46 is a very 'good-natured' microphone whose design avoids wind and handling noise problems. Colour: black, sound inlet basket: refined steel, black.
Features - Two-ply sound inlet basket provides increased protection from wind and pop noise
- Rugged metal housing
- Rubber mounted capsule ensures low sensitivity to handling noise
- Cardioid pick up pattern ensures excellent speech intelligibility even with high ambient noise levels
Type: | Dynamic, Reporting | Pick Up Pattern: | omni-directional | Frequency response: | 40 - 18 000 Hz | Sensitivity: | 2,0 mV/Pa | Ιmpedance: | 350 Ohm | Dimensions: | Ø 49 x 250 mm | Weight: | 360 gr | Use: | Video/Broadcast |
|
Clear, directional audio on the GO!
Compact and light weight by design, the VideoMic GO delivers clear, crisp, directional audio with incredible ease of use. Its tight pickup area focuses directly in front of the microphone and reduces other surrounding sounds, ensuring that your subject is isolated from distracting background noise.
The integrated Rycote® Lyre® shock mount isolates your microphone from bumps and vibrations that could otherwise interfere with your sound.
Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
The VideoMic GO has no complicated switches or settings and is powered by your camera's external microphone input, requiring no batteries to operate, ensuring you never miss a great shot.
Acoustic Principle Line Gradient
Frequency Range 100Hz ~ 16,000Hz
Equivalent Noise 34dBA SPL (A - weighted per IEC651)
Signal Noise 60dB SPL (A - weighted per IEC651)
Power Required Plug-in power required (330uA @ 2.5V)
Dimensions 167mmL x 79mmH x 70mmD
Directional Pattern Super-Cardioid
Sensitivity -35dB re 1V/Pa (17.8mV @ 94dB SPL) ±2dB @ 1kHz
Maximum SPL 120dB (@ 1kHz, 1% THD into 1kΩ load)
Dynamic Range 96dB (per IEC651)
Output Connection 3.5mm stereo mini-jack
Weight 73g
|
The new RODE NTG-1 is a lightweight condenser shotgun microphone, specifically
designed for professional applications within the film, video, television, voice-over and
ENG industries.
The NTG-1 provides an electronically balanced output stage and operates on 48 V to
the P48 standard. The NTG-1 offers wide bandwidth and a controlled polar response
coupled with low noise SMT electronics. The NTG-1 is extremely lightweight making it
ideal for mounting directly to video cameras (with optional accessories) or a Boom pole.
The NTG-1 comes complete with mount and windshield. The supplied windscreen effectively
suppresses wind noise when recording outdoors in moderate conditions. Optional accessories
are available for more demanding applications.
SPECIFICATIONS:
Features:
Broadcast sound quality. Low noise circuitry. Condenser transducer. Rugged metal construction.
Low weight: 105 grams approx. . Low handling noise. Supplied with stand mount, zip pouch and
windshield. Designed & manufactured in Australia. Full 2 year guarantee.
Operation power:
The NTG-1 is designed to operate from standard P48 phantom power. The NTG-1 will
operate between 44 V to 52 V applied with positive polarity to pin 2 and pin 3 via the
output XLR connector.
Operation output impedance:
The NTG-1 will operate satisfactorily into a load impedance as low as 1 k§?. If a load below
this is used, the output signal level will be reduced. The NTG-1??s output is balanced between
pin 2 (hot), pin 3 (cold) and pin 1 is ground.
Acoustic principle: Line plus Gradient.
Directional pattern: Super-Cardioid.
Frequency range:
20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave
Output impedance: 50 ?
Signal noise ratio din iec 651:
76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 18 dB SPL (per IEC651, IEC268-15)
Maximum spl: 139 dB (@ 1% THD into 1 k?)
Sensitivity:
-36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
Dynamic range din iec 651: 121 dB (per IEC651, IEC268-15)
Power supply voltage: P48 Phantom, 44 V to 52 V
Current consumption: 3.5 mA
Output connection:
3 pin XLR, balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)
Weight with battery: 105 g approx.
Dimensions width: 217mm
Dimensions depth: 22mm
Dimensions height: 22mm
|
Reviews
There are no reviews yet.