| Content |
Set with 6.35mm TS plug-on transmitter and Pedalboard receiver
General Characteristics
- Wireless entry-level plug & play series operating in the 2.4 GHz spectrum for license-free worldwide use
- Lightweight, compact plug-on transmitters and receivers, offering either XLR, jack (6.3mm, 1/4”) or mini jack (3.5mm, 1/8”) connections as well as a pedalboard receiver with female jack and XLR male chassis outputs
- Intuitive single-button interface to manage all power, linking, muting and battery monitoring tasks
- Up to 5 systems can be operated simultaneously at a maximum range of up to 75m
- All portable devices feature USB re-chargeable lithium-ion batteries that provide up to 5 hours of runtime
Delivery Includes:
- XSW-D-Instrument-Tx 6.3mm jack plug-on transmitter
- XSW-D-Pedalboard-Rx pedalboard receiver
- Belt clip
- Extension cable 6.3mm
- USB-A to USB-C charging cable
- Pedalboard receiver power supply
|
System Specifications
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
Not all frequencies are available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: +/-35 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion:
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.
Net Weight: 1.1 kg (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
Batteries: Two 1.5V AA, not included
Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H
Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in |
Set composed of:
- 1 x LDWIN42R2
- 2 x LDWIN42BP
- 2 x LDWS100MH3
Due to the changed situation in the area of general frequency allocations for the operation of wireless systems starting in 2015, LD Systems decided to develop the even more flexible and highly professional WIN 42 wireless system.
With its outstanding audio quality, the LD Systems WIN 42 UHF system offers numerous potential applications for live performances and permanent installations. The working UHF frequency range is 734 MHz to 776 MHz. Both the handheld microphone and belt pack transmitter versions provide any vocalist, speaker or instrumentalist optimal transmission of his or her performance with the greatest possible freedom of movement. By means of a threaded connection, the microphone head of the handheld transmitter can be swapped quickly and easily (dynamic and condenser capsules).
The system has more than 1680 freely selectable frequencies and thus makes it possible to operate up to 20 systems simultaneously. The "channel scan" function assists you in finding and tuning to a transmission frequency without interference. This frequency is then transmitted simply and conveniently from receiver to transmitter via an infrared link. The transmitting power is adjustable in 3 stages (10, 30, 50 mW) directly on the microphone, permitting adaptation to any environment.
The rack True Diversity receiver houses numerous system features, for example, a transmitter battery status indicator on the receiver display, an indicator for the (transmitter) "Mute On/Off" function on the receiver display, 4 EQ presets that are switchable at the receiver, and much more. A highly professional system embodying the outstanding value-for-money that is so typical for LD Systems.
- UHF frequency range 734 - 776 MHz
- 1680 frequencies
- 20 groups with 577 fixed frequencies
- user bank with 1680 freely selectable frequencies in 25 kHz increments
- 255 addresses selectable
- channel scan
- true diversity receiver
- interchangeable microphone capsules (dynamic / condenser)
Receiver display
- volume
- radio frequency level antenna A/B
- audio level
- battery status of transmitter
- transmitter sync via infrared
- squelch setting in menu
- equalizer setting in menu
- naming template in menu
- 10 sets storable
- lockable menu
- balanced XLR output, unbalanced 6.3 mm jack
- adjustable output
- adjustable headphone output
Transmitter Display - battery status
- RF power
- AF power
- additional system information
Technical Specifications WIN42 Receiver - Model Name: LDWIN42R
- Channels: 1680 (20 groups + 1 user group)
- Frequency range: 734 - 776 MHz
- Audio Frequency response: 60 Hz - 16 kHz
- THD:
- Signal/Noise ratio: >100 dB
- Audio Output: XLR balanced / 6,3 mm Jack unbalanced
- Power Supply: external power adapter 13,5 V DC, 500 mA
- Dimensions (W x H x D): 212 x 44 x 184 mm
Technical Specifications Handheld Transmitter - Model Name: LDWIN42MD
- Channels: 1680
- Frequency range: 734 - 776 MHz
- Audio Frequency response: 60 Hz - 16 kHz
- RF output power: adjustable 10 mw / 30 mw / 50 mw
- Power requirement: 2 x AA size batteries
- Operating time: >13 h with alkaline batteries
- Dimensions (L x Ø): 255 x 52 mm
Technical Specifications Beltpack Transmitter - Model Name: LDWIN42BP
- Channels: 1680
- Frequency range: 734 - 776 MHz
- Audio Frequency response: 60 Hz - 16 kHz
- RF output power: adjustable 10 mw / 30 mw / 50 mw
- Input Connector: mini XLR 3-pole (phantom power for headset)
- Power requirement: 2 x AA size batteries
- Operating time: >14 h with alkaline batteries
- Dimensions (W x H x D): 87 x 25 x 63 mm
|
System Specifications
Operating Frequencies: UHF band
Band C: 541.500 MHz to 566.375 MHz (996 frequencies)
Band D: 655.500 MHz to 680.375 MHz (996 frequencies)
Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)
Not all frequencies are available in all areas. Please check with local regulations.
Minimum Frequency Step: 25 kHz
Modulation Mode: FM
Maximum Deviation: +/-35 kHz
Dynamic Range: > 110 dB (A-weighted), typical
Total Harmonic Distortion:
Operating Range: 100 m (300'), typical
Open range environment with no interfering signals.
Operating Temperature Range: -5o C to +45o C (23o F to 113o F)
Battery and LCD performance may be reduced at very low temperatures.
Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)
Receiver
Receiving System: True diversity
Image Rejection: 60 dB nominal, 55 dB minimum
RF Sensitivity: 20 dBuV at 60 dB S/N ratio
Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV
Antenna Input: BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements: 12-18V DC, 500 mA
Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.
Net Weight: 1.1 kg (38.8 oz), without accessories
Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters
Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V
Batteries: Two 1.5V AA, not included
Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)
Depending on battery type and use pattern.
Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H
Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in | The WMS 40 Mini Instrumental Set ensures brilliant sound and ease of use at an unbeatable price/performance ratio.
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic sound at any time.
The SR 40 Mini receiver provides three status LEDs indicating ON/OFF status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the level at the ¼" output jack. The supplied switched mode power supply operates on any AC voltage from 110 to 240 VAC and includes EU, UK, and US adapters.
The PT 40 Mini bodypack is probably the smallest and lightest transmitter in its class. A reliable mini XLR output allows you to connect every compatible AKG miniature microphone. Battery life of the transmitter is the same legendary "30 hours off a single AA battery" as for the WMS 40 models, reducing the need to replace batteries and thus saving real money in the long run.
The system includes an SR 40 MINI receiver, a PT 40 MINI pocket transmitter, a MKG L instrument cable, a universal power supply with US/UK/EU adapter, and one AA size dry battery.
User's Manual | Shure QLXD14 Wireless System, 470-534MHz, Includes QLXD1 Bodypack Transmitter, QLXD4 Receiver
The QLXD14 Bodypack Wireless System is part of the QLX-D wireless systems family.
The QLXD14 wireless system includes a QLXD4 receiver, QLXD1 transmitter, a WA305 instrument cable, PS23 power supply, two 1/2 wave antennas, two 2' BNC cables with bulkhead adapters, a zipper bag, two AA Alkaline batteries, and rackmount hardware. The QLXD14 system offers good wireless functionality for demanding live sound events and installations.
300 feet (100 meter) line-of-sight operating range 120 dB dynamic range Digital predictive switching diversity receiver to capture the clearest sound 64 MHz tuning bandwidth Up to 17 compatible systems per 6 MHz TV band, and 22 systems per 8 MHz band Easy pairing of transmitters and receivers over IR scan and sync Automatic channel scan Selectable display mode showing group/channel, frequency, or battery runtime Rugged metal construction |
Reviews
There are no reviews yet.