AKG WMS 420 INSTRUMENTAL Wireless instrument set

Free yourself! for live sound, presentations and installations The WMS420 wireless microphone system provides a highly flexible as well as easy to use solution. The ultra high frequency system is set up within seconds and is equally suitable on stage as well as in locations where a single- or multi channel solution is needed.

The entire WMS420 wireless system consists of the SR420 stationary receiver, HT420 handheld transmitter and the PT420 pocket transmitter. The HT420 handheld transmitter is available with the patented D5 dynamic microphone acoustic. This capsule guarantees maximum rejection against feedback, reduced handling noise and the famous AKG sound. Both transmitters are shipped with charging contacts that enable the use of rechargeable batteries. Moreover the transmitters offer exceptional eight hours of operation time from a single AA size battery, which dramatically reduces the operating costs in day-to-day use.

The detachable receiver antennas allow the use of professional accessories, such as antenna splitters and remote mounted directional antennas for multi channel systems. The WMS420 series includes three different bodypack sets. The head-worn set includes the high performance C555L condenser microphone. The presenter set includes the professional C417L lavalier microphone. The guitar set includes an instrument cable. With the AKG WMS420 system up to eight channels can be run simultaneously.

Detachable receiver antennas
enable the use of professional RF accessories

Patented state-of-the-art D5 dynamic capsule
cuts through the mix

Transmitters with charging contacts
saves money in day-to-day use and preserves the environment

Compatible with all AKG MicroMics
almost all applications can be covered

Low battery warning indicator
for secure operation

System Specifications
Operating Frequencies: UHF band

Band C: 541.500 MHz to 566.375 MHz (996 frequencies)

Band D: 655.500 MHz to 680.375 MHz (996 frequencies)

Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)

Not all frequencies are available in all areas. Please check with local regulations.

Minimum Frequency Step: 25 kHz

Modulation Mode: FM

Maximum Deviation: +/-35 kHz

Dynamic Range: > 110 dB (A-weighted), typical

Total Harmonic Distortion:
Operating Range: 100 m (300'), typical

Open range environment with no interfering signals.

Operating Temperature Range: -5o C to +45o C (23o F to 113o F)

Battery and LCD performance may be reduced at very low temperatures.

Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)

Receiver
Receiving System: True diversity

Image Rejection: 60 dB nominal, 55 dB minimum

RF Sensitivity: 20 dBuV at 60 dB S/N ratio

Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV

Antenna Input: BNC-type, 50 ohms

Bias voltage 12V DC, 60 mA, each

Power Requirements: 12-18V DC, 500 mA

Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.

Net Weight: 1.1 kg (38.8 oz), without accessories

Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters

Body Pack
RF Power Output    High: 30 mW, Low: 10 mW (switchable), at 50 ohms

Spurious Emissions: Following federal and national regulations

Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V

Batteries: Two 1.5V AA, not included

Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)

Depending on battery type and use pattern.

Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H

Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in

Set composed of:

• 1 x LDWIN42R2
• 2 x LDWIN42BP
• 2 x LDWS100MH3

Due to the changed situation in the area of general frequency allocations for the operation of wireless systems starting in 2015, LD Systems decided to develop the even more flexible and highly professional WIN 42 wireless system.

With its outstanding audio quality, the LD Systems WIN 42 UHF system offers numerous potential applications for live performances and permanent installations. The working UHF frequency range is 734 MHz to 776 MHz. Both the handheld microphone and belt pack transmitter versions provide any vocalist, speaker or instrumentalist optimal transmission of his or her performance with the greatest possible freedom of movement. By means of a threaded connection, the microphone head of the handheld transmitter can be swapped quickly and easily (dynamic and condenser capsules).

The system has more than 1680 freely selectable frequencies and thus makes it possible to operate up to 20 systems simultaneously. The "channel scan" function assists you in finding and tuning to a transmission frequency without interference. This frequency is then transmitted simply and conveniently from receiver to transmitter via an infrared link. The transmitting power is adjustable in 3 stages (10, 30, 50 mW) directly on the microphone, permitting adaptation to any environment.

The rack True Diversity receiver houses numerous system features, for example, a transmitter battery status indicator on the receiver display, an indicator for the (transmitter) "Mute On/Off" function on the receiver display, 4 EQ presets that are switchable at the receiver, and much more. A highly professional system embodying the outstanding value-for-money that is so typical for LD Systems.

• UHF frequency range 734 - 776 MHz
• 1680 frequencies
• 20 groups with 577 fixed frequencies
• user bank with 1680 freely selectable frequencies in 25 kHz increments
• 255 addresses selectable
• channel scan
• true diversity receiver
• interchangeable microphone capsules (dynamic / condenser)

Receiver display

• volume
• radio frequency level antenna A/B
• audio level
• battery status of transmitter
• transmitter sync via infrared
• squelch setting in menu
• equalizer setting in menu
• naming template in menu
• 10 sets storable
• lockable menu
• balanced XLR output, unbalanced 6.3 mm jack
• adjustable output
• adjustable headphone output

• battery status
• RF power
• AF power
• additional system information

• Model Name: LDWIN42R
• Channels: 1680 (20 groups + 1 user group)
• Frequency range: 734 - 776 MHz
• Audio Frequency response: 60 Hz - 16 kHz
• THD:
• Signal/Noise ratio: >100 dB
• Audio Output: XLR balanced / 6,3 mm Jack unbalanced
• Power Supply: external power adapter 13,5 V DC, 500 mA
• Dimensions (W x H x D): 212 x 44 x 184 mm

• Model Name: LDWIN42MD
• Channels: 1680
• Frequency range: 734 - 776 MHz
• Audio Frequency response: 60 Hz - 16 kHz
• RF output power: adjustable 10 mw / 30 mw / 50 mw
• Power requirement: 2 x AA size batteries
• Operating time: >13 h with alkaline batteries
• Dimensions (L x Ø): 255 x 52 mm

• Model Name: LDWIN42BP
• Channels: 1680
• Frequency range: 734 - 776 MHz
• Audio Frequency response: 60 Hz - 16 kHz
• RF output power: adjustable 10 mw / 30 mw / 50 mw
• Input Connector: mini XLR 3-pole (phantom power for headset)
• Power requirement: 2 x AA size batteries
• Operating time: >14 h with alkaline batteries
• Dimensions (W x H x D): 87 x 25 x 63 mm

VWTTM

Exclusive VWT (Virtual Wire Transmission) technology ensures full-range frequency response, excellent transient response, and wide dynamic range - just like a high-quality guitar cable.


Superior specs.

Relay digital wireless systems produce full-range tones with 10Hz-20kHz frequency response, exceedingly low noise with up to 120dB dynamic range, and studio-quality resolution with 24-bit A/D conversion. (Comparably priced analog wireless systems offer 50Hz-15kHz frequency response and >90dB dynamic range. This wreaks havoc on your tone, especially if you use a high-gain amp.)

Cable tone simulation.

Using a cable and a wireless system? Now you can switch back and forth without having to adjust the tone settings on your amplifier. Relay digital wireless systems feature a Cable Tone Simulator, which lets you match the sound of your Relay to the sound of your cable.

Compander free.

Companders squash your signal and ruin your tone. Analog wireless systems require companders but Relay wireless systems do not. Remaining compander-free enables Relay to deliver a beautiful high-end sparkle, thunderous low-end punch, and touch response that analog wireless systems simply cannot deliver.

Audio-Technicaʼs second-generation 2000 Series is a 10-channel frequency-agile UHF wireless system designed to suit a variety of applications, including MI/live performance, fixed installation, public address, A/V rental houses and places of worship. It offers all the advantages of a high-quality, professional wireless system at an extremely affordable price. New professional features include two available frequency bands and switchable antenna power. Also new to the 2000 Series, the optional ATW-CHG2 two-bay recharging station provides power to recharge NiMH batteries in two ATW-T220a handheld transmitters and/or ATW-T210a UniPak® transmitters in any combination.

Offering 10 selectable channels in one of two UHF frequency ranges and True Diversity UHF wireless technology, the 2000 Series features automatic frequency scanning. At the touch of a button, this function automatically determines and sets the best available frequency. Any of the 2000 Seriesʼ 10 channels may be used together without any frequency coordination problems or group selection issues. The 2000 Series also incorporates Audio-Technicaʼs Tone Lock™ squelch plus an easy-to-read LCD information display.

    Serious advances in affordable professional wireless
    Clear sound quality and rock-solid, dependable performance
    Automatic frequency scanning
    10 compatible user-switchable channels in one of two UHF frequency ranges
    Antenna power available for powered antennas & other in-line RF devices
    True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
    Tone Lock™ tone squelch system fights interference
    Rugged metal half-rack receiver with soft-touch controls and LCD display
    Balanced XLR and unbalanced 1/4” output jacks enable use with a wide variety of audio gear
    Switchable transmitter power output with high and low settings offered
    Includes rack-mount kit and detachable UHF antennas
    Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
    ATW-T220a Handheld Microphone/Transmitter features PRO 41 Capsule for maximum feedback rejection and consistent sound
    New charger (ATW-CHG2 ) available for ATW-T220a & ATW-T210a transmitters

System Specifications
Operating Frequencies: UHF band

Band C: 541.500 MHz to 566.375 MHz (996 frequencies)

Band D: 655.500 MHz to 680.375 MHz (996 frequencies)

Band I: 482.000 MHz to 507.000 MHz (1001 frequencies)

Not all frequencies are available in all areas. Please check with local regulations.

Minimum Frequency Step: 25 kHz

Modulation Mode: FM

Maximum Deviation: +/-35 kHz

Dynamic Range: > 110 dB (A-weighted), typical

Total Harmonic Distortion:
Operating Range: 100 m (300'), typical

Open range environment with no interfering signals.

Operating Temperature Range: -5o C to +45o C (23o F to 113o F)

Battery and LCD performance may be reduced at very low temperatures.

Frequency Response: 70 Hz to 15 kHz (+1 dB, -3 dB)

Receiver
Receiving System: True diversity

Image Rejection: 60 dB nominal, 55 dB minimum

RF Sensitivity: 20 dBuV at 60 dB S/N ratio

Maximum Output Level: XLR, balanced: +9 dBV; 1/4-inch (6.3 mm), unbalanced: +7 dBV

Antenna Input: BNC-type, 50 ohms

Bias voltage 12V DC, 60 mA, each

Power Requirements: 12-18V DC, 500 mA

Dimensions: 210.0 mm (8.27“) W x 164.4 mm (6.47“) D x 44.0 mm (1.73“) H
Not including BNC connectors or feet.

Net Weight: 1.1 kg (38.8 oz), without accessories

Accessories Included: Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters

Body Pack
RF Power Output    High: 30 mW, Low: 10 mW (switchable), at 50 ohms

Spurious Emissions: Following federal and national regulations

Input Connection: Four-pin Locking Connector
- Pin 1: GND
- Pin 2: INST INPUT
- Pin 3: MIC INPUT
- Pin 4: DC BIAS +5V

Batteries: Two 1.5V AA, not included

Battery Life:
- High: 6 hours (alkaline)
- Low: 8 hours (alkaline)

Depending on battery type and use pattern.

Dimensions: 66.0 mm (2.60“) W x 24.0 mm (0.94“) D x 87.0 mm (3.43“) H

Net Weight: 81 g (2.9 oz), without batteries Dimensions and Weight in PackagingChannel DShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel CShipping Weight: 5 lbs Shipping Dimensions: 15 x 13 x 4 in Channel IShipping Weight: 6 lbs Shipping Dimensions: 15 x 14 x 4 in