| Content |
• Sealed Optics
• DMX & ILDA control
• 20K Scanner pair
• 2 Auto & Sound shows, 86 built-in patterns
• Runs pre-programmed shows from SD card
• 1G SD card included
• Same personality as B300
The Galactic G300 is a single 532nm green color laser. Green is the most impressive color for laser shows and because of the 300mW laser module this unit makes powerful beam shows. If you like to create a more impressive show you can combine the G300 with the Showtec B1000 (51331). Both units have the same functionality and personality which makes programming together very easy. It also has built-in laser shows and together with the master-slave function you can run an impressive laser show without any preparation. The Galactic B300 can be controlled by DMX or programmed with any laser software using the ILDA protocol. For rental solutions you can use the SD card slot to run pre-programmed shows without controller.
Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area's a remote interlock is necessary for safety regulations.
Specifications
Power Input: AC 100-240V, 50/60Hz
Power Consumption: 38 Watt
Laser Color: Green 532nm
Laser Power: 300mW
Laser Modulation: TTL
Laser Class: 4
Scan Speed: 20K
Scan Angle: +/-40˚
Control Modes: 2xAuto, 2xSound,
Master/Slave, DMX,
ILDA, SD-Card
Control Display: LCD
DMX Channels: 13
Data Connector: In/Out, XLR 3Pin & Sub-D
25 Pole
Safety Features: Key switch, Interlock,
Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2,
2007-03
Dimensions: 385 x 310 x 162 mm
(excl. bracket)
Weight: 8 kg
Accessories: 2 Keys, Interlock test
connector, 1G SD card
|
- Type : Multi Light Bar
- Number & Colors Led : 2X Rgb
- Led Power (W) : 9Watt
- Laser : 30Mw 532Nm Green, 100Mw 650Nm Red
- Strobe : 4 X 1 Watt White Leds
- Other : 3W Red, 3W Green & 3W Blue Led for every derby
- Control : Dmx512, Auto, Music, Master/Slave, Ir Remote Control
- Channels Dmx512 : 3, 5, 6, 9 or 27
- Input / Output Dmx512 : 3Pin xlr
- Power Input / Output : IEC
- Power supply (V) : 100/240 V ac, 50/60 Hz
- Consumption (W) : 48
- Dimensions (mm) : 1185 x 386 x 110
- Weight (kg) : 6.6 bar / 8.35 with case
|
Cameo D FORCE 5000 RGB
- 5,000 mW total output power
- User-adjustable beam alignment
- Dust-proof aluminium housing for minimum maintenance
- High-speed high-performance 30 Kpps galvo scanner @ 8° ILDA
- Analogue modulation for up to 16 million colour shades
- Precision beam with minimum divergence for razor-sharp projections
- Interlock emergency stop signal output
- ILDA interface for software control
- Scan Fail Safety system
- Neutrik PowerCON input and output
- Temperature-controlled low-noise fan for cool and quiet operation
- Optional adapters for Pangolin safety lenses and DiscoScan V2 360° wide-angle lens (CLLDFORCEAPSSL, CLLDFORCEAPDSL)
Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.
The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.
The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.
Total power
5,000 (R: 1,400, G: 1,400, B: 2,300) mW
Laser sources
Laser diode
Max. scan angle
max. 50 °
Operating voltage
100 V AC - 250 V AC
Power connector
Neutrik PowerCon
Housing material
aluminium
| Projecting red, green and blue color mixes with 700 mW output power the LLUKE 700 RGB includes diode and DPSS lasers with 3 mm beam diameters and no more than 2 mrad divergence.
The Luke Series professional show lasers utilize an ingenious dual layer design to separate the optical components from the power supply and fan to vastly improve performance. They feature high speed 30 Kpps galvo scanners 8 degrees ILDA, a 60° scan angle and 128 pattern presets for exciting graphics projections with high visibility and pinpoint beams. The Luke laser lights include an ILDA interface on 25-pin D-sub connectors for computer control, 3-pin inputs and outputs for DMX control in 4-channel and 11-channel modes and a built-in microphone with adjustable sensitivity for sound control. In addition, they provide master, slave and standalone capability. The rugged high quality aluminium enclosure sports a key switch to prevent unauthorized use, a bright display with four function keys for manual operation and Neutrik powerCON mains connectors. A low noise fan keeps the compact units quiet and cool, and for audience safety the Luke Series laser lights are equipped with a “Scan Fail Safety” system.
Note: Sharing identical presets, the Luke lasers are compatible with the Ioda series for master and slave operation. With switchable inversion, the master and slave combo is capable of producing the most interesting and impressive laser show effects.
- Item number: CLLLUKE700RGB
- Product type: LASER
- Total power: 700 mW
- Colour spectrum: RGB
- Wavelength(s): 650 nm, 532 nm, 447 nm
- Beam Data: approx. 3 mm / 2 mrad divergence
- Laser sources: Laser diode & DPSS
- Laser class: 4
- Scanner: High performance galvoscanner, 30 kpps 8 degrees ILDA
- Max. scan angle: 60 degrees
- Operating modes: ILDA, DMX-512, Auto, Sound Control
- DMX input: 3-Pin XLR
- DMX output: 3-Pin XLR
- ILDA input: 25-pin Sub-D male
- ILDA output: 25-pin Sub-D female
- DMX mode: 4-channel, 12-channel
- Controls: Mode, Enter, Value Down, Value Up
- Display elements: LC display
- Power supply: AC 100-240 V / 50-60 Hz
- Power consumption: 75 W
- Power connector: Neutrik PowerCon
- Housing Material: aluminium
- Housing colour: black
- Dimensions (WxDxH): 215 x 157 x 225 mm (excluding bracket)
|
Description - An eye-catching blue laser using high quality 15Kpps scanners instead of ordinary stepper motors:
- Very smooth and soft movements
- 80 Pre-programmed patterns like: numbers, drawings, words, …
- Fabulous preprogrammed laser shows for all kinds of applications: lounge bar, discotheque, mobile DJ, …
- Class 3B laser based on 400mW 450nm blue laser.
- Several working modes:
- DMX-control: 1channel for easy operation or 17 channels for full control
- Standalone: sound activated (internal mic) or automatic
- IR-remote: infrared remote control.
- Master/slave: wonderful synchronized shows
- Built-in microphone
- 3-digit LED display for easy menu navigation
- Key actuated on/off switch and emergency switch (interlock) input for additional safety
- Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Technical Information - Mains Input: AC 100~240V, 50/60Hz
- Fuse: 250V 1A slow blow (20mm glass)
- Total Power consumption: 13W
- Sound Control: Internal microphone
- DMX connections: 3pin XLR male / female
- DMX channels: 1 or 17 channels
- DMX starting address: 001 à 512
- Laser Power: 400mW Blue CW laser (λ = 450nm)
- Laser radiation class: 3B
- Beam diameter @ aperture:
- Divergence (each beam)
- Divergence (total output)
- Scanner speed: 15Kpps
- Working temperature: 10°C to 40°C
- Laser Safety Standard: EN/IEC 60825-1 Ed2, 2007-03
- Size:190 x 170 x 80mm
- Weight: 1.5kg
|
RGB1w (Red300mw/638nm; Green: 150mw / 532nm; Blue:600mw/440nm) 25kpps scanner ,LCD,SD,X/Y, RGB dimmer
Laser diode Laser power:2000mW
Color Balance:
Red>150mw/638nm ( 150mW/532nm OEM ( 600mw/445 OEM ( |
Reviews
There are no reviews yet.