Content |
The MV5 from Shure is a portable digital condenser microphone that has a detachable desktop stand. It can be used to capture audio on Mac or Windows computers, iPods, iPhones, iPads, and Android/iOS devices in applications such as music, podcasting, video chats, and more
- Plug-n-play USB microphone
- Small diaphragm
- Cardioid condenser
- Comes with metal stand
- Three DSP modes
- Headphone jack
- Available in two colors
- Transducer: Electret condenser (16 mm)
- 24bit/ 48 kHz maximum sound quality
- Frequency response: 20 to 20k Hz
- Adjustable gain: Up to +36dB
MFi Certified
| Yes | DSP Modes | Presets: Voice/instrument/flat | Type | Electret condenser (16 mm) | Polar Pattern | Unidirectional (cardioid) | A/D Converter | Up to 24-bit/48 kHz | Frequency Range | 20 Hz to 20 kHz | Gain Range | Adjustable: 0 to +36 dB | Sensitivity | -40 dBFS/Pa at 1 kHz
At Minimum Gain, Flat Mode: 1 Pa=94 SPL | Maximum SPL | At Minimum Gain, Flat Mode: 130 dB SPL | Headphone Output | 1/8" (3.5 mm) mini-jack | Power Requirements | Powered through USB or Lightning connector | Microphone Mute | Yes | Housing | PC/ABS with die-cast zinc frame | Dimensions (H x W x D) | 2.60 x 2.64 x 2.56" (66 x 67 x 65 mm) without mounting stand
3.50 x 5.59 x 3.82" (89 x 142 x 97 mm) with mounting stand | Weight | 3.2 oz (90 g) without mounting stand
5.6 oz (160 g) with mounting stand |
|
The first handheld digital microphone for Android and PCPut the power of superior digital audio recording in the palm of your hand
iRig Mic HD-A is the first affordable high-quality handheld digital condenser microphone for Android. Now singers, musicians, journalists, videographers, podcasters and more can enjoy high definition digital audio while on the go. Talk about versatile: You can connect it directly to your Android device or PC! How's that for convenience?
But versatility is just one of iRig Mic HD-Aʼs many attributes. iRig Mic HD-A sports a 24-bit audiophile-grade A/D converter, a 44.1/48 kHz sampling rate and a low-noise/high-definition pre-amp.
You can count on iRig Mic HD-A to give you high quality results, anytime and anywhere. It can handle the most demanding professional needs in the field or in the studio and is comparable in quality to what you'd get in a mic that costs three times as much.
Specs iRig Mic HD-A Specifications - Microphone Type: condenser, electret
- Polar Pattern: cardioid
- Interface Type: USB digital microphone, built-in low-noise high-definition preamp
- Frequency Response: 40 Hz - 18 kHz, -3dB
- Maximum Sound Pressure: 134 dB
- Distortion: 3% THD at 134 dB, 1 kHz
- Windscreen: built-in
- Sensitivity: adjustable over a 40 dB range
- Built-in low-profile gain control
- Built-in multicolor LED for status and audio level indication
- Connector Type: standard Micro-USB
- Power and Connection: works with Android and PC
Package includes - iRig Mic HD-A microphone
- OTG connection cable
- USB connection cable
- Protective zippered storage bag
- Mic clamp
- 5/8” to 3/8” thread adapter
Dimensions - Size: 185mm/7.28" x 48mm/1.89“
- Cables length: 1.5m/59“
Compatible with Android devices that support Samsung Professional Audio technology, like the Samsung Galaxy Note 4 and Galaxy Note Edge. Samsung Galaxy S5 and Galaxy Note 3 require Android 5.
Compatible with Android devices with USB (OTG) connector running Android apps that use USB (OTG) audio input.
Compatible with any Android devices with USB (OTG) connector running Android 5.
Windows®: Support using the ASIO4ALL driver on Windows XP/Vista/7/8. See our FAQ here for further details.
| The C 414 B/XLS has been carefully designed to maintain the legendary sonic character of the C 414 family while integrating new features and performance enhancements made possible by new technology. The C 414B/XLS is designed to deliver accurate pickup of all acoustic instruments and voices.
The microphone's 5 pickup patterns are easily selectable via an electronic switch with LED indication and offer the selection of omnidirectional, cardioid, wide cardioid, hypercardioid and figure-eight patterns.
The pickup pattern selector switch utilizes a dual-color LED indicator that provides visual indication of the pattern selected and also changes from green to red to indicate if the microphone's output electronics are being overloaded. The pattern selector can also be used to "lock" the microphone's switch settings by pressing and holding it for 3 seconds.
On the rear of the microphone, an electronic switch allows the selection of -6 dB, -12 dB and -18 dB pre-attenuation levels which are accomplished by changing the polarization voltage to the capsule. The C 414 B/XLS has switchable bass cut filters of 12 dB-per-octave at 40 Hz and 80 Hz, and a 6-dB-per-octave filter at 160 Hz for control of proximity effect. On-axis sensitivity for all patterns is 23 mV/Pa and its self-noise is an extremely low 6 dB-A.
The C 414 B/XLS has a transformerless output and all-metal chassis, making it immune to electrical interference and RF from digital equipment, video monitors and wireless systems. It comes complete in an all-metal road case with the AKG H-85 shock mount, a PF80 external two-stage pop filter, a W414X external windscreen and an individually-measured chart showing the response curve of the microphone. It is also available in factory-matched stereo pairs packaged with a H50 stereo bar instead of the external pop filter.
The C 414B/XLS is built in Vienna, Austria and comes with a three-year limited parts and labor warranty.
Features
High sensitivity and extremely low self noise
Five switchable polar patterns for placement and application flexibility
Two-color LEDs provide quick visual indication of selected polar pattern and output overload
Elastic capsule suspension greatly minimizes structurally-transmitted noise from chassis vibration
H 85 professional shock mount/stand adapter, PF 80 external pop filter and W 414 X external windscreen
High sound pressure level capability and wide dynamic range
Completely immune to electrostatic and electro-magnetic interference from digital gear, computer monitors, etc. thanks to solid metal housing and transformerless output stage
Three switchable bass cut filters and three pre-attenuation pads with LEDs for quick visual indication
All switchable components operate in low impedance circuits for ultra-high relability even in extremely humid conditions
Optional R 414 remote control unit (available by the end of 2004) offers full control of all switchable parameters via standard microphone cable and 3-pin XLR-type connectors
Specifications
Type: 1" large diaphragm pressure gradient microphone
Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
Frequency Range: 20 to 20,000 Hz
Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
Preattenuation Pad: -6, -12,-18 dB, switchable
Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Power Requirements: 48 V phantom power to DIN/IEC
Connector: 3-pin XLR
Dimensions: 2" x 1.5" x 6.3“
Net Weight: 10.6 oz
Shipping Weight: 5 lbs (2.27 kg) |
The RODE i-XY is the ultimate recording microphone for iPhone® and iPad®. With up to 24-bit/96k* recording and on-board high-fidelity A/D conversion, your i-XY recordings are rich, smooth and accurate. At the heart of the i-XY is a matched pair of ½” cardioid condenser capsules, fixed in a perfect 90 degree ʽnear-coincidentʼ alignment. This results in immersive and true-to-life stereo recordings, captured in incredibly high detail. Designed and manufactured in Australia, the i-XY is available in two versions - Lightning and 30-pin. The Lightning version supports the iPhone® 5s, iPhone® 5 and iPhone® 5c. The 30-pin version supports the iPhone® 4S, iPhone® 4, iPad® (3rd generation) and iPad® 2. A foam windshield is supplied for outdoor recording as well as a reinforced protective zip case to ensure your i-XY is available whenever you need it.
Record stereo audio at 24-bit, 96kHz*
Matched pair of 1/2" cardioid condenser capsules
Metal casing for enhanced durability and electromagnetic interference immunity.
Includes windshield, zip case
Software-switchable 72Hz high pass filter for reduction of unwanted low frequency noise.
iXY-L compatible with iPhone 5, iPhone 5s, iPhone 5c, iPhone 6 and iPhone 6plus.
iXY-30PIN compatible with iPhone 4s and earlier
Acoustic Principle: Pressure Gradient
Capsule: 0.50“
Polar Pattern: Cardioid
Address Type End
Frequency Range: 20Hz - 20kHz
Maximum SPL 120dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity: -42.0dB re 1 Volt/Pascal (8.52mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted): 18dB-A
Weight: 40.00gm
Dimensions: 46.00mmH x 55.00mmW x 40.00mmD
*RODE Rec or RODE Rec LE app required for 24/96 quality. iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
iphone shown on the pictures is not included | The Shure MOTIV MVL Omnidirectional Condenser Lavalier Microphone is a quick and easy solution for clear audio in close-mic digital speech recording applications.
With a discreet footprint and a 1/8” (3.5mm) TRRS connector, the Shure MVL works with any mobile phone or tablet equipped with recording capabilities by plugging directly into the headphone jack. Record using the ShurePlus MOTIV iOS app or other digital recording platform to capture clear speech in interview, videography or public speaking environments, and share immediately via email or text.
MVL Omnidirectional Condenser Lavalier Microphone
Designed and built to Shure technology standards, the durable MVL comes with a carrying pouch, windscreen and tie-clip mount for mobile audio recordings that greatly surpass the quality of onboard phone and tablet microphones.
Features:
- 1/8" (3.5 mm) TRRS connector plugs into any mobile phone or tablet with a headset microphone input jack
- Sleek, miniature housing for discreet appearance onscreen
- Best-in-class in signal-to-noise ratio, headroom and maximum SPL
- Proven Shure RF/GSM interference protection blocks errant noise artifacts due to external interference
- Quality design and construction, built to Shure technology and durability standards
- Includes windscreen, tie clip and carrying pouch
Polar Pattern
|
Omnidirectional |
Frequency Response |
45Hz-20kHz |
Series |
MOTIV , MOTIV |
Model |
MVL , MVL |
Output Impedence |
350 ohms |
Dynamic Range (SPL) |
124dB |
Low Cut Filter |
No |
Connector Type |
Mini 1/8" |
Self Noise |
N/A |
Pad |
No |
Weight |
8.0 g (.28 oz) |
Dimensions |
.22" dia. × .6" × 52" w/cable |
Matched Pair |
No |
|
The gray MV5 from Shure is a portable digital condenser microphone that has a detachable desktop stand. It can be used to capture audio on Mac or Windows computers, iPods, iPhones, iPads, and Android/iOS devices in applications such as music, podcasting, video chats, and more
Main features of the Shure MV5 - Plug-n-play USB microphone
- Small diaphragm
- Cardioid condenser
- Comes with metal stand
- Three DSP modes
- Headphone jack
- Available in two colors
- Transducer: Electret condenser (16 mm)
- 24bit/ 48 kHz maximum sound quality
- Frequency response: 20 to 20k Hz
- Adjustable gain: Up to +36dB
MFi Certified
| Yes | DSP Modes | Presets: Voice/instrument/flat | Type | Electret condenser (16 mm) | Polar Pattern | Unidirectional (cardioid) | A/D Converter | Up to 24-bit/48 kHz | Frequency Range | 20 Hz to 20 kHz | Gain Range | Adjustable: 0 to +36 dB | Sensitivity | -40 dBFS/Pa at 1 kHz
At Minimum Gain, Flat Mode: 1 Pa=94 SPL | Maximum SPL | At Minimum Gain, Flat Mode: 130 dB SPL | Headphone Output | 1/8" (3.5 mm) mini-jack | Power Requirements | Powered through USB or Lightning connector | Microphone Mute | Yes | Housing | PC/ABS with die-cast zinc frame | Dimensions (H x W x D) | 2.60 x 2.64 x 2.56" (66 x 67 x 65 mm) without mounting stand
3.50 x 5.59 x 3.82" (89 x 142 x 97 mm) with mounting stand | Weight | 3.2 oz (90 g) without mounting stand
5.6 oz (160 g) with mounting stand |
|
Reviews
There are no reviews yet.