SICA Z004035 6 E 1,5 CS 8Ω 160W PROFESSIONAL SPEAKER FERRITE 6”

• 1,5'' voice coil aluminium former
• Rubber surround with DAR technology
• Cone waterproof treatment
• Ventilated voice coil to reduce power compression
• 91.7 dB sensitivity

Woofer 6" 300w program/94dB/W/m-70-
5000Hz.

300 W continuous program power capacity
38 mm (1.5 in) aluminium voice coil
70 - 5000 Hz response
94 dB sensitivity

Specification
Nominal Diameter 170 (6.5) mm (in)
Nominal Impedance (1) 8 Ohm
Minimum Impedence 6.6 Ohm
Nominal Power Handling (2) 150 W
Continuous Power Handling (3) 300 W
Sensitivity (1W/1m) (4) 94 dB
Frequency Range 70 - 5000 Hz
Voice Coil Diameter 38 (1.5) mm (in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 12.5 (1/2) mm (in)
Magnetic Gap Depth 6 (0.25) mm (in)
Flux Density 1.4 T

Thiele & Small Parameters
Fs 75 Hz
Re 5.4 Ohm
Qes 0.31
Qms 11.7
Qts 0.3
Vas 8 (0.28) dm3 (ft3)
Sd 132 (20.5) cm2 (in2)
Eta Zero 1 %
Xmax +/- 6 mm
Xvar +/- 7.5 mm
Mms 14 g
Bl 10.8 Txm
Le 0.6 mH

Mounting and Shipping Info
Overall Diameter 187 mm (7.4 in)
Bolt Circle Diameter 172 mm (6.7 in)
Baffle Cutout Diameter 145 mm (5.7 in)
Depth 82 mm (3.2 in)
Flange and Gasket Thickness 9 mm (0.35 in)
Net Weight 2.2 kg (4.8 lb)
Shipping Weight (4 units) 10.1 kg (22.2 lb)
Shipping Box (4 units) 405x225x210 mm
(15.9x8.8x8.3 in)
1For different impedances, please ask.
22 hours test made with continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
3Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.

Nominal Diameter     160 mm (6 in)
Overall Diameter     181.2/164 mm (7.13/6.46 in)
Bolt Circle Diameter     167 mm (6.57 in)
Baffle Cutout Diameter     147 mm (5.79 in)
Depth     84.5 mm (3.33 in)
Flange and Gasket Thickness     8 mm (0.31 in)
Net Weight     1.2 Kg (2.64 lb)
Shipping Box
(Single Carton Box - 4 units)     380x393x128 mm (14.9x15.47x5.03 in)
Shipping Weight (4 units)     5.6 Kg (13.82 lb)

Nominal Impedance     8 Ohm
Minimum Impedance     5.9 Ohm
Nominal Power Handling ***     100 W
Maximum Power Handling ****     200 W
Sensitivity (1W/1m)     91 dB
Frequency Range     63÷5000 Hz
Voice Coil Diameter     32 mm (1.26 in)
Winding Material     Cu
Former Material     Kapton
Winding Depth     12.5 mm (0.49 in)
Magnetic Gap Depth     6 mm (0.24 in)
Flux Density     1 T

Fs     61 Hz
Re     5.4 Ohm
Qes     0.6
Qms     6
Qts     0.54
Vas     14.8 dm^3 (0.52 ft^3)
Sd     137 cm^2 (21.23 in^2)
Xmax *     5.25 mm
Xdamage **     13.15 mm
Mms     14 g
Bl     6.8 N/A
Le     0.5 mH
Mmd     13 g
Cms     0.56 mm/N
Rms     0.84 Kg/s
Eta Zero     0.46 %
EBP     102 Hz

B&C's 6NDL44 6-1/2" cast frame neodymium woofer is a lightweight, powerful choice for ultra-compact multi-way speaker systems. Its rubber half-roll edge and treated cone are engineered to handle high bass excursions without drama, while still allowing a clean, articulate sonic signature. The 6NDL44 is also suitable as the midrange element in medium efficiency 3-way applications.

• Woofer/midrange
• High-energy neodymium motor
• 400 watt continuous program power
• 1.7" copper voice coil on a polyimide former
• Smooth, extended frequency response
• 91.5 dB 1w/1m sensitivity

• 93 dB Sensitivity 1 W / 1 m
• 130 W Power Handling
• 1.5" Sandwich Voice Coil
• Double treated Cone for Water Protection
• Neodymium Magnet System
• Twin Aluminum demodulating Rings for ultra low Distortion
• Optimal for compact 2- or 3-way Systems