B & C Speakers 12-PZ32 Woofer 12 inch 400WRMS 97dB

156.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: 12-PZ32 Category:
Long excursion 12″ woofer with 800W power handling for subwoofer application. A special 3″ copper voice coil using proprietary high temperature adhesives and an optimized magnet assembly guarantees superb LF dynamic range with a very low distortion. Due to the linear characteristics of the 12 PZ 32, exceptional results are obtained in horn loaded subwoofer […]

 

Read more

Long excursion 12″ woofer with 800W power handling for
subwoofer application. A special 3″ copper voice coil using
proprietary high temperature adhesives and an optimized
magnet assembly guarantees superb LF dynamic range with a
very low distortion. Due to the linear characteristics of the 12
PZ 32, exceptional results are obtained in horn loaded
subwoofer applications.

Specifications
Nominal Diameter 320 mm (12 in)
Nominal Impedance 8 Ω
Minumum Impedance 7.8 Ω
Power Handling
(70 –700 Hz)
Nominal1 400 W
Continuous Program2 800 W
Sensitivity (1W/1m)3 95 dB
Frequency Range 40-2500 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 22 mm (7/8 in)
Magnetic Gap Depth 10 mm (3/8 in)
Flux Density 1.1 T
Also available in 4 Ω, data upon request

Thiele & Small Parameters4
Fs 38 Hz
Re 6.2 Ω
Qes 0.2
Qms 5.9
Qts 0.19
Vas 102 dm3 (3.6 ft3)
Sd 522 cm2 (80.9 in2)
η0 2.7%
X max ± 5.5 mm
X var ± 5.5 mm
Mms 64 g
Bl 21.7 T·m
Le 2.7 mH

Mounting and Shipping Information
Overall Diameter 316 mm (12.4 in)
Bolt Circle Diameter 296 mm (11.6 in)
Baffle Cutout Diameter 282 mm (11.1 in)
Depth 134 mm (5.3 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 7.6 kg (16.7 lb)
Shipping Weight 8.5 kg (18.7 lb)
Shipping Box 380x380x170 mm
(15x15x6.7 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2500 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test.

Weight 2.50 kg

Reviews

There are no reviews yet.

Be the first to review “B & C Speakers 12-PZ32 Woofer 12 inch 400WRMS 97dB”

Your email address will not be published. Required fields are marked *

Quick Comparison

B & C Speakers 12-PZ32 Woofer 12 inch 400WRMS 97dB removeCELESTION T5491 WOOFER 12'' NTR12-3018D PRO AUDIO 350W removeBMS BMS12CN680L 12" Coaxial Neodymium Speaker 12CN680 500 W + 80 W 8 Ohm removeCELESTION T4436 WOOFER 12'' ALNICO BLUE 15OHM FOR GUITAR AMP 15W 100dB removeEMINENCE ED12A Delta-12A 12'' 400 W 8 Ohm SPEAKER Compatible replacement for YAMAHA JAY5120 and more removeBMS BMS12C362L 12" Coaxial Speaker 12C362 500 W + 80 W 8 Ohm remove
NameB & C Speakers 12-PZ32 Woofer 12 inch 400WRMS 97dB removeCELESTION T5491 WOOFER 12'' NTR12-3018D PRO AUDIO 350W removeBMS BMS12CN680L 12" Coaxial Neodymium Speaker 12CN680 500 W + 80 W 8 Ohm removeCELESTION T4436 WOOFER 12'' ALNICO BLUE 15OHM FOR GUITAR AMP 15W 100dB removeEMINENCE ED12A Delta-12A 12'' 400 W 8 Ohm SPEAKER Compatible replacement for YAMAHA JAY5120 and more removeBMS BMS12C362L 12" Coaxial Speaker 12C362 500 W + 80 W 8 Ohm remove
Image
SKU12-PZ32T5491BMS12CN680LT4436ED12ABMS12C362L
Rating
Price 156.00 incl. GR VAT 237.58 incl. GR VAT 699.92 incl. GR VAT 312.48 incl. GR VAT 147.55 incl. GR VAT 482.76 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Out of stock

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderOut of stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Read more

Add to cart

Description
Content

Long excursion 12" woofer with 800W power handling for
subwoofer application. A special 3" copper voice coil using
proprietary high temperature adhesives and an optimized
magnet assembly guarantees superb LF dynamic range with a
very low distortion. Due to the linear characteristics of the 12
PZ 32, exceptional results are obtained in horn loaded
subwoofer applications.

Specifications
Nominal Diameter 320 mm (12 in)
Nominal Impedance 8 Ω
Minumum Impedance 7.8 Ω
Power Handling
(70 –700 Hz)
Nominal1 400 W
Continuous Program2 800 W
Sensitivity (1W/1m)3 95 dB
Frequency Range 40-2500 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 22 mm (7/8 in)
Magnetic Gap Depth 10 mm (3/8 in)
Flux Density 1.1 T
Also available in 4 Ω, data upon request

Thiele & Small Parameters4
Fs 38 Hz
Re 6.2 Ω
Qes 0.2
Qms 5.9
Qts 0.19
Vas 102 dm3 (3.6 ft3)
Sd 522 cm2 (80.9 in2)
η0 2.7%
X max ± 5.5 mm
X var ± 5.5 mm
Mms 64 g
Bl 21.7 T·m
Le 2.7 mH

Mounting and Shipping Information
Overall Diameter 316 mm (12.4 in)
Bolt Circle Diameter 296 mm (11.6 in)
Baffle Cutout Diameter 282 mm (11.1 in)
Depth 134 mm (5.3 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 7.6 kg (16.7 lb)
Shipping Weight 8.5 kg (18.7 lb)
Shipping Box 380x380x170 mm
(15x15x6.7 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2500 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test.

  • 12” neodymium woofer offers 300Wrms (AES) continuous power handling and 98dB sensitivity
  • 3” high temperature Inside/Outside voice coil efficiently dissipates heat, preventing sensitivity loss through thermal compression
  • M-roll surround provides progressive excursion control, yielding a smooth response even at extremes of frequency range
  • Extremely lightweight design combined with a highly efficient magnet assembly results in exceptional power-to-weight ratio
  • Intelligent heat management in both chassis and magnet assembly design further minimizes distortion
Nominal diameter (mm/in) 305/12
Power Rating (AES, W rms) 300
Nominal impedance (Ω) 8
Voice coil diameter (mm/in) 76.2/3.0
Magnet type Neodymium
Chassis type Cast aluminium
Sensitivity (dB) 98
Frequency range (Hz) 50-4000
Coil material Round copper
Cone material Kevlar loaded paper
Surround material Cloth-sealed
Suspension Single
Xmax (mm/in) 4/0.16
Gap depth (mm/in) 8.0/0.32
Voice coil winding width (mm/in) 16.0/0.63
Small Signal Parameters
D (m/in) 0.26/10.24
Fs (Hz) 56.4
Mmd (g/oz) 54.41/1.92
Mair 6.92/0.244
Qms 2.74
Qes 0.33
Qts 0.29
Re (Ω) 5.77
Vas (lt/ft3) 51.78/1.828
BI (Tm) 19.61
Cms (mm/N) 0.13
Rms (kg/s) 7.921
Le (mH) 0.778
Mounting Information
Overall diameter (mm/in) 310/12.2
Overall depth (mm/in) 137/5.39
Cut-out diameter (mm/in) 286/11.26
Mounting slot dimensions (mm/in) 6.5/0.26 x 9.5/0.37
Number of mounting slots 8
Mounting slot PCD range (mm/in) 294/11.57
Unit weight (kg/lb) 2.6/5.7
Packed Dimensions and Weight
Single pack size W x D x H (mm/in) -
Single pack weight (kg/lb) -
Multipack (60) size W x D x H (mm/in) 1080 x 980 x 880/42.5 x 38.6 x 34.6
Multipack (60) weight (kg/lb) 146/321

  • Neodymium Coaxial Transducer
  • 98 dB Sensitivity 1 W / 1 m
  • 500 W + 80 W Power Handling
  • 3" Copper Sandwich Voice Coil
  • Triple Aluminum demodulating Rings
  • Elliptical 80° x 60° Waveguide for precise directivity
  • Single Point Source providing coherent Wave Front
  • Very high SPL, superb Quaity Sound
  • Optimal for compact 2-way Systems

This classic guitar speaker actually started life as a radio speaker that was modified specifically for use in electric guitar amplifiers. In its original incarnation as the G12 T530 it appeared in several colour variations, but it was the Blue version, fitted as standard into Vox AC30 amps, that secured its place in guitar tone history.

The Blue found favour with notable guitarists like Brian May, due to its glorious dampened attack, warm lows, mellow upper-mids and brilliant belllike top-end. When coupled with a suitable amplifier it evokes rich definition and develops beautiful musical compression when pushed. According to tone enthusiasts worldwide, the Blue is the benchmark for guitar speaker perfection.

 

General specifications
Nominal diameter 12“, 305mm
Power Rating 15W
Nominal impedance 8Ω and 15Ω
Sensitivity 100dB
Chassis type Pressed steel
Voice coil diameter 1.75“, 44.5mm
Voice coil material Round copper
Magnet type Alnico
Frequency range 75-5000Hz
Resonance frequency, Fs 75Hz
DC resistance, Re 6.4Ω & 11.8Ω
Mounting Information
Diameter 12.2“, 309mm
Overall depth 6.5“, 165mm
Magnet structure diameter 5.0“, 128mm
Cut-out diameter 11.1“, 283mm
Mounting slot dimensions 0.31“, 7.9mm Ø
Number of mounting slots 4
Mounting slot PCD 11.7“, 297mm
Unit weight 9.3lb, 4.2kg

 

DELTA-12A Standard American Recommended for professional audio as a mid-bass or woofer (with high-pass filter) in vented enclosures. *Good replacement for Yamaha 12″ JAY51200 (1216301A), JAY51100, JAY5120, JAY5110 woofers. Or Loudspeakers C112V, SM12V, BR12, BR12M, S112V, S112IV, SM121V, SV12, SV12M & more   SPECIFICATION
  • Nominal Basket Diameter 12“, 304.8 mm
  • Nominal Impedance 8 ohms
  • Power Rating Watts 400 W / Music Program 800 W
  • Resonance 55 Hz
  • Usable Frequency Range 54 Hz - 5 kHz
  • Sensitivity 98.3
  • Magnet Weight 56 oz.
  • Gap Height 0.375“, 9.53 mm
  • Voice Coil Diameter 2.5“, 63.5 mm
THIELE & Small Parameters
  • Resonant Frequency (fs) 55 Hz
  • DC Resistance (Re) 6.3
  • Coil Inductance (Le) 0.74 mH
  • Mechanical Q (Qms) 5.27
  • Electromagnetic Q (Qes) 0.46
  • Total Q (Qts) 0.43
  • Compliance Equivalent Volume 81.3 liters (Vas) 81.3 liters / 2.9 cu. ft.
  • Peak Diaphragm Displacement Volume 125 cc
  • Mechanical Compliance of Suspension 0.21 mm/N
  • BL Product (BL) 13.5 T-M
  • Diaphragm Mass inc. Airload (Mms) 39 grams
  • Efficiency Bandwidth Product (EBP) 120
  • Maximum Linear Excursion (Xmax) 2.4 mm
  • Surface Area of Cone (Sd) 519.5 cm²
  • Maximum Mechanical Limit (Xlim) 9.9 mm
MOUNTING Information
  • Recommended Enclosure Volume Sealed N/A Vented 25.5-85 liters/0.9-3 cu.ft.
  • Overall Diameter 12.03“, 305.5 mm
  • Baffle Hole Diameter 10.95“, 278.1 mm
  • Front Sealing Gasket fitted as standard
  • Rear Sealing Gasket fitted as standard
  • Mounting Holes Diameter 0.25“, 6.4 mm
  • Mounting Holes B.C.D. 11.59“, 294.3 mm
  • Depth 5.35“, 136 mm
MATERIALS of Construction
  • Aluminum voice coil
  • Polyimide former
  • Ferrite magnet
  • Vented core
  • Pressed steel basket
  • Paper Cone
  • Cloth cone edge
  • Solid composition felt dust cap
  • 98 dB sensitivity 1 W / 1 m
  • 500 W + 80 W Power Handling
  • 3" Copper Sandwich voice Coil
  • Triple Aluminum Demodulating Rings
  • Single Point Source providing coherent Wave Front
  • Very high SPL, superb Quality Sound
  • Optimal for compact 2-way Systems
Weight2.50 kg2.60 kg5.50 kg4.20 kg4.00 kg7.60 kgDimensionsN/AN/AN/AN/AN/AN/AAdditional information
Weight 2.50 kg
Weight 2.60 kg
Weight 5.50 kg
Weight 4.20 kg
Weight 4.00 kg
Weight 7.60 kg