| Content |
- System type: 2-way active speaker
- Woofer: 8“, 1.5" voice coil, medium frequency / low frequency
- Compression driver: 1“
- Frequency response: 75 Hz - 20 KHz at - 3 dB
- Sensitivity: 92 dB 1W@1m
- Maximum sound pressure level: 110 dB
- Crossover: 3.5 kHz
- Features: Bluetooth® wireless technology, media player
- Input connectors: XLR, jack, RCA
- Dimensions (W x H x D): 30.5 x 45.5 x 25.5 cm (12 x 18 x 10“)
- Weight: 6.3 kg (14 lb)
|
8’’ bi-active two way plastic speaker with Media Player
- Multimedia player: Usb Flash Drive, Sd Memory Card, STEREO Bluetooth Device, Remote Control
- Woofer 8’’ VC 1,5”
- Driver 1’’ VC 1”
- Line output XLR OUT + ¼” JACK OUT
- Line input XLR IN + 2 x RCA
- Mic input XLR IN + ¼” JACK IN
- Rms power AB class 120 + 30 W
- Peak power 300W
- Frequency response 60hz-20khz
- Peak spl 123 dB
- Power supply AC110V/AC230V
| User´s Manual
Technical drawing
LD Systems STINGER 28 A G3
Active 2 x 8" 2-way bass-reflex PA speaker
- Active 2 x 8" 2-way bass-reflex PA speaker
- 131 dB max. SPL and 500-watt RMS performance with a highly-efficient digital amplifier
- Perfect all-rounder for full-range, satellite and monitor applications
- Practical presets for fast and user-specific frequency tuning
- Homogeneous dispersion pattern thanks to a BEM-optimised tweeter wave guide
- Two 8" custom woofers and BMS tweeter driver
- Distortion-free sound at even maximum volumes, thanks to DynX® DSP technology
- 2 line/mic input channels with individual gain controllers plus mono mix output
- Birch plywood housing with ultra-robust polyurea coating and M10 rigging points
- Shock-resistant front grille for optimum speaker protection
- 36 mm dual tilt stand attachment with 0° and 5° tilt angle
- Extensive and smart accessories for installation and transport
This highly professional 2-way active system is designed for absolute, long-term reliability. With its rugged bass reflex housing and finely tuned, user-friendly presets, it is suitable for use as a full-range speaker, satellite or monitor. The Stinger® 28 A G3 is powered by a highly efficient Class-D amplifier with a powerful 500-watt continuous output. Its two specially developed 8" woofers and a BMS tweeter driver achieve a powerful bass response and fresh, natural trebles. The wave guide of the tweeter has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflection from floors and ceilings and prevents sidelobe levels, thus achieving controlled and homogeneous dispersion.
LD Systems’ proprietary DynX® DSP technology means that the Stinger® 28 A G3 delivers perfect performance with maximum clarity and power under all conditions. The signal processing of the crossover function and the multi-band limiter achieve an optimal runtime and high freedom from distortion. Designed as an all-around workhorse, the housing of the speaker is made of robust birch plywood. An extremely resilient coating of polyurea offers exceptional robustness and durability. The features include a steel front grille, a dual-tilt stand attachment, flight points and ergonomic handles. The Stinger® 28 A G3 is a good value and attractive solution for professional sound systems, with extensive accessories that support usage on the stage and in fixed installations.
Product type
PA loudspeaker
Type
active
Low/mid driver dimensions
2 x 8 "
Woofer size
2 x 203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Amplifier
Class D
Dispersion (H x V)
90 x 50 °
RMS
500 W
Peak power
1000 W
Frequency response
58 - 20000 Hz
Max. SPL (peak)
131 dB
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Input sensitivity
-5 dBu
Controls
2 x gain , 2 x Mic/Line , Mode
Indicators
Limit , Mode , On , Protect (protection circuit engaged) , Signal
Line inputs
2
Line input connectors
6.3 mm jack , XLR
Line outputs
1
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Operating Temperature
0 - 40 °C
Relative Humidity
< 80% (non-condensing)
Cabinet material
12 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
270 mm
Height
756 mm
Depth
290 mm
Weight
20,5 kg | The days of sacrificing sound system power and performance for portability are over. The JBL EON ONE Compact packs a professional speaker, a full-featured, 4-channel mixer and Bluetooth control into our most compact battery-powered PA, weighing in at just 17.6 pounds. Sound your best in seconds with premium Lexicon and dbx-inspired effects and presets that you can customize right on your phone or tablet using the JBL EON ONE Compact Control app—no engineer needed. Presenters, fitness instructors and emcees will appreciate EON ONE Compact’s ducking feature, which lowers background music volume when speech input is detected. Peer-to-peer Bluetooth lets you broadcast music playback. And with EON ONE Compact’s tool-free, swappable 12-hour battery, you’ll keep the party going long after the sun goes down. Whether you’re a singer/songwriter, DJ, presenter, fitness instructor, or you just want to enjoy amazing sound on the go, get ready to #PlayAnywhere with JBL EON ONE Compact.
Features
- 112 dB output the highest volume in its class
- 8-inch woofer with deep low-frequency performance down to 37.5 Hz
- Ultralight unit weighs just 17.6 pounds (8 kg)
- Set up quickly and easily using JBL EON ONE Compact Control app presets
- Sound your best with professional effects including EQ, reverb, chorus and delay
- Balance your volume levels with built-in 4-channel mixer
- Optimize your sound with 8-band output EQ, customizable via presets
- Stream music from your phone or tablet via Bluetooth to up to four EON One Compact units
- Operate two EON ONE Compact units in stereo mode
- Two pro-grade preamps deliver fuller, richer sound from any microphone
- Connect mics, instruments and playback devices with two XLR/TRS combo jacks, one 1/4-inch hi-Z guitar input and one 3.5mm (1/8-inch) aux input
- Phantom power supports condenser mics
- One-touch ducking feature automatically lowers music volume when speech input is detected, ensuring every word is heard clearly
- Two USB 3.0 ports allow high-speed charging of external devices• Tool-free, swappable battery p provides up to 12 hours of playtime
- Fast battery charging—just 2.5 hours
- Two performance orientations: monitor and vertical; tuning and mixer displays automatically adjust
- Headphone jack allows private monitoring for practice sessions and managing presets
- 1/4-inch passthrough output allows system expansion with additional EON ONE Compact units
- Convenient, built-in tilting tablet stand orients to front or back of system
- Built-in pole mount expands configuration options
- External battery charger option available separately
- Ergonomic handle and even weight distribution make carrying the system a breeze
| - PS 08 but active
- Amplifier: 120Wrms (240 Music)
- Balanced MIC + LINE input with level control
- Balanced LINE outputs
- Treble + Bass Master volume control +
Technical Data
- Amplifier power: 120Wrms / 240Wmusic
- Signal / noise rate: 85dB
- Micro input: 1.5mV @ 20kΩ
- Line input: 1V @ 20kΩ
- Tone controls: +/- 12dB @ 100Hz and 10kHz
- Frequency response: 70 - 20,000Hz
- Woofer: 8 "woofer (20cm)
- Compression Driver / Horn: 1 "voice coil
- Nominal dispersion: 90 ° x 60 ° (HxV)
- Mains Input: 115Vac / 60Hz - 230V AC / 50Hz
- Fuse: 250V 3.15A slow blow (20mm glass)
- Dimensions: 402 x 294 x 220 mm
- Weight: 8kg |
The QSC K.2 Series™ represents the best-inclass loudspeaker for today’s demanding audio professionals. The perfect combination of elegant design, superior audio performance, high functionality, simple and intuitive operation, and genuine QSC reliability, K.2 delivers extraordinary results for users in both portable and installed applications.
Features
- Best in class audio performance
- 2000 Watt Class-D amplifier module
- Intrinsic Correction™ tuning and loudspeaker management
- DMT™ (Directivity Matched Transition) design provides excellent power response and consistent performance across the listening area
- Refined, professional appearance looks great in any application
- Rugged ABS enclosure for long life and lasting durability
- Deployment in either main PA or floor monitor position
- Factory Presets and savable/recallable Scenes for commonly-used application
- Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
- Dual pole cup mounts (standard and 7.5 degree down-tilt)
- M10 fittings for flown applications
- Optional security panel prevents unauthorized tampering of controls
- Complete EASE and CAD information available online
| Model |
K8.2 |
| Configuration |
Multi-purpose, 2-way active loudspeaker |
| LF Transducer |
8-inch (203 mm), cone |
| HF Transducer |
1.4-inch (35.6 mm) titanium diaphragm compression driver |
| Frequency Response (-6 dB) |
59 Hz - 20 kHz |
| Frequency Range (-10 dB) |
55 Hz - 20 kHz |
| Nominal Coverage Angle |
105° Axisymetric |
Maximum Rated SPL1
Amplifier
Cooling |
128 dB @1 M, peak 122 dB @ 1 M, continuous
Class D Peak: 1800 W (LF), 225 W (HF)
Low-noise, variable speed fan |
| Controls |
Power
3 x Level
Rotary encoder (push)
2 x selection buttons |
| Indicators |
Monochrome LCD Display 1.75-inch x 1-inch (45 mm x 25.4 mm)
2 x Power LED (front and rear)
3 x Input Signal LED
Input A Mic selected LED
Input B Hi-Z selected LED
Limiter active LED |
| Connectors |
2 x locking XLR/F ¼⁻ᶦⁿᶜʰ combo (Mic/Line Input and Hi-Z/Line Input
1 x 3.5 mm TRS (Stereo Input)
2 x XLR/M (Loop-thru Output)
1 x XLR/M (Mix Output)
1 x locking IEC power connector |
| AC Power Input |
Universal power supply 100 – 240 VAC, 50 – 60 Hz |
| AC Power Consumption 1/8th Power2 |
100 VAC, 2.1 A / 120 VAC, 1.9 A / 240 VAC, 1.1 A |
| AC Power Consumption - Standby |
.2A at any voltage |
| Enclosure Details |
|
| Enclosure |
Impact Resistant ABS |
| Attachment Points |
2 x M10 threaded inserts plus Pull-Back |
| Color |
Black (RAL 9011) |
| Grille |
18 Gauge powered coated steel, internal cloth lining |
| Dimensions (HxWxD) |
17.7 x 11 x 10.6 in
449 x 280 x 269 mm |
| Net Weight |
12.2 kg (27 lbs) |
| Shipping Weight |
14.4 kg (31.8 lbs) |
| Regulatory |
CE, WEEE, UL, China RoHS, RoHS II, FCC Class B |
| Optional Accessories |
K8 Tote, K8 Outdoor Cover
M10 Kit-C, K.2-LOC Lock Out Cover
K8.2 Yoke |
|
Reviews
There are no reviews yet.