Content |
Stantonʼs latest addition to their turntable family is the T.62 M2 DJ turntable. The T.62 M2 is super easy to operate and uses a direct-drive motor with 1.6kg motor torque as well as a straight tonearm providing superior scratching and tracking ability for scratch and performance DJs. The Stanton 300 cartridge comes pre-mounted on the tonearm and also features a pitch control fader with +/-10% adjustment and 33/45rpm playback speeds as well as providing you with a full, free copy of Deckadance 2 DJ software.
Deckadance 2 DJ Software:
Deckadance 2 is a powerful DJ application built for Stanton products, whether youʼre a professional DJ, remix/groove producer, mobile DJ or even just a bedroom DJ Deckadance 2 is flexible enough to suit any performance objectives. Not only is Deckadance 2 a standalone application but it can also run inside of your DAW with VST support as well as running VST compliant effects and soft synths inside Deckadance 2 giving you the capability to perform mind-blowing sets while being controlled by MIDI controllers, timecoded vinyl and CD systems. Deckadance 2 provides you with every tool you need to stand out above other DJs.
Specs:
- Easy to operate direct-drive turntable with professional features
- Straight tone arm improves tracking for scratching
- Manual pitch control fader (+/-10%)
- Stanton 300 cartrdige comes pre-mounted on headshell
- 2 playback speeds (33/45RPM)
- 2 start/stop switches for mix or battle setup
- RCA Stereo outputs
- Accessories include RCA cables, slipmat and dust cover
- Full version of Deckadance DVS software included
Specs:
- Easy to operate direct-drive turntable with professional features
- Straight tone arm improves tracking for scratching
- Manual pitch control fader (+/-10%)
- Stanton 300 cartrdige comes pre-mounted on headshell
- 2 playback speeds (33/45RPM)
- 2 start/stop switches for mix or battle setup
- RCA Stereo outputs
- Accessories include RCA cables, slipmat, USB cable and dust cover
- Full version of Deckadance DVS software included
| The directly driven Technics SL-1210GR has an extremely high quality core and brushless motor for a vibration-free drive. The Technics SL-1210GR becomes a real heavyweight thanks to the superbly crafted 2-layer sandwich chassis and the heavy-duty aluminium die-casting plate, which is rubber-coated inside for resonance damping. High-quality RCA sockets and a connection for the power cord make the hearts of HiFi fans beat faster.
The high-end turntable is equipped with the medium-heavy, S-shaped aluminium arm - including removable headshell with SME connection. The tonearm is light and easily height-adjustable.
Extreme robustness, fast start-up times and the easy assembly of different pickups are still the hallmarks of Technics turntables today. Older records are also reproduced in an impressive width.
A beautifully designed bonnet with the legendary arch over the tonearm is also included.
Features Technics SL-1210 GR
- Technology for high rotational stability
- Ironless direct drive motor
- High precision motor control
- Vibration tolerant construction
- Vibration absorbing platter plate
- Robust housing construction
- Silicone rubber cushioning feet
- High quality components
- Highly sensitive tone arm
- Gold plated connectors
TECHNOLOGY FOR ROTATIONAL STABILITY
- Coreless Direct Drive Motor
- High-Precision Motor Controller
CONSTRUCTION FOR VIBRATION TOLERANCE
- High-dampening Turntable Platter
- Rigid Cabinet Construction
- Silicon Rubber Insulator
HIGH QUALITY PARTS
- High Sensitive Tonearm
- Gold--plated Detachable Terminals
TECHNICS DEFINITIVE DESIGN
TURNTABLE SECTION
- Type: Direct Drive Manual Turntable
- Turntable Speeds: 33 1/3, 45, 78 r/min
- Adjust Range: ±8%, ±16%
- Starting Torque: 2.2 kg・cm
- Build-up Characteristics: 0.7 s. from standstill to 33 1/3 r/min
- Wow and Flutter: 0.025% W.R.M.S.
- Rumble: 78dB (IEC 98A Weighted)
- Turntable Platter: Aluminum die-cast
Diameter:332mm
Weight:Approx. 2.5kg (Including rubber sheet)
TONEARM SECTION
- Type: Universal, Static Balance
- Effective Length: 230mm • Overhang: 15mm
- Tracking Error Angle:
Within 2° 32\' (at the outer groove of 30cm record)
Within 0° 32\' (at the inner groove of 30cm record)
- Offset Angle: 22°
- Arm Height Adjustment Range: 0 - 6mm
- Stylus Pressure Adjustment Range: 0 - 4g (Direct Reading)
- Head Shell Weight: Approx. 7.6g
- Applicable Cartridge Weight Range:
[without auxiliary weight] 5.6 - 12.0g (14.3 - 20.7g (including head shell))
[with auxiliary weight] 10.0 - 16.4g (18.7 - 25.1g (including head shell))
- Cartridge Mounting Dimension: JIS 12.7mm, interval • Head Shell Terminal Lug: 1.2mmφ 4-pin terminal lug
TERMINALS
- Audio Output: PHONO (Pin Jack) x 1, EARTH TERMINAL x 1
GENERAL
- Dimensions (W x H x D): 453 x 173 x 372 mm
- Weight: Approx. 11.2kg
| Turntable:
- Type: direct-drive turntable
- Drive: quartz driven upper-torque direct drive
- Motor: 16-pole, 3-phase, brushless motor
- Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
- Starting torque: 2.8 - 4.5 kg/cm (adjustable)
- Adjustable stop time (0.2 - 6 sec.)
- Start-up time / change to RPM: < 0.2 sec
- Wow and flutter: 0.01% WRMS*
- S/N ratio: > 55 dB (DIN-B)
- Brake system: electronic brake
Platter:
- Material: die cast aluminium
- Diameter: 332 mm
- Weight: approx.1.5 kg
Tone arm:
- Type: universal, static balanced, S-shaped
- Effective length: 230 mm
- Overhang: 15 mm
- Tracking error range: < 3°
- Offset Angle: 22°
- Stylus Pressure: 0 - 4 g
- VTA setting range: 0 - 6 mm
- Usable weight of pick-ups: 3.5 ~ 8.5 g (incl. headshell 13 ~ 18 g)
- Anti-skating range: 0 - 3 g
- Effective tone arm mass: 30 g
- 1x PHONO/1x LINE out (gold-plated), 1x GND earth connection, 1x USB port (type B)
- Accessories included: Turntable, slipmat, LED needle light, counterweight, phono RCA cable with grounding, USB cable, power cord, operating instructions
- Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
- Power consumption: 17 W
- Dimensions (WDH): 458 x 354 x 144,6 mm
- Weight: approx. 11.4 kg
| Reloop RP-7000 MK2 Overview
The silver RP-7000 MK2 Upper Torque Turntable System from Reloop features a direct-drive motor and rugged construction. It is resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality silver metalic finish. The RP-7000 MK2 features a statically balanced S-shaped tonearm with hydraulic lift and anti-skating mechanism. The tonearm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tonearm comes with a universal connection for pickup cartridge systems (SME).
The aluminum LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has been integrated to facilitate a vertical setup (battle position) and by using the buttons on the system's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.
Furthermore, using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range ±8%. However, the RP-7000 MK2 is also capable of a wider, DJ-friendly ±16% pitch range and a massive ±50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).
Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals.
The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. In addition, the turntable break speed (platter stop) can be adjusted from 0.2 to 6 seconds and the precision-machined, heavy die-cast aluminum platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.
- Rigid chassis construction with heavier design and additional reinforcements out of metal, rubber, and molding compound for high-vibration damping and isolation
- Powerful starting torque (adjustable from 2.8 - 4.5kg/cm)
- Fine-tuned motor control for further optimization of wow and flutter and rotation
- Height-adjustable tonearm base (VTA) and anti-skating control
- Satin aluminum material used for tonearm
- Adjustable pitch scale for precise adjustments
- Easily replaceable, freely rotatable LED needle light in aluminum design
- Quartz driven DJ turntable with upper-torque direct drive
- Adjustable stop speed (0.2 to 6 seconds)
- Precise control of motor with 3 speeds (33 1/3, 45 & 78 rpm)
- Precision manufactured, die-cast aluminum turntable
- Rubber inlays to reduce vibrations and background noise
- Static-balance universal S-shaped tonearm with hydraulic lift and anti-skating mechanism
- Universal connection for pickup systems (SME)
- Pitch range ±8%, ±16%, ±50%
- Additional start/stop button for vertical positioning
- Reverse Function: switch for forward and reverse operation
- Recessed connection cavity for easy installation in cases & seamless adjustment
- Phono and line out (no ground required)
- Removable mains and cinch cable
- Shock-absorbing feet to insulate against vibrations
| Just like the PLX-1000, the PLX-500 is built to produce a high-quality vinyl sound. The shortest possible audio routing from the stylus to the outputs reduces distortion, while the phone/line output switch lets you connect directly to your sound system or to powered speakers with no need for an external amplifier.
Included Accessories
Slip mat
Dust cover with jacket stand
Adapter for 45 EP records
Head shell (with cartridge)
Balance and shell weights
Audio conversion cord:
• 1 Stereo pin plug (female)
• 1 Stereo mini plug (male)
USB cord
Specifications
Width: 450 mm
Height: 159 mm
Depth: 368 mm
Weight: 10.7 kg
Turntable
Drive Method: Servo-type direct drive
Platter: Aluminium, die-casting diameter: 332 mm
Motor: 3-phase, brushless DC motor
Braking System: Electronic brake
Rotation Speed: 33⅓, 45, 78 rpm
Rotation Adjustment Range: ±8 %
Wow and Flutter:
Signal-to-Noise Ratio: 50 dB
Starting Torque: > 1.6 kgf・cm
Start Time: Within 1 sec (at 33⅓ rpm)
Tone Arm
Arm Type
• Universal type S-shape tone arm
• Gimbal-supported type bearing structure
• Static balance type
Overhang: 16 mm
Effective Length: 230.5 mm
Tracking Error: Within 3°
Height Adjustment Range: 6 mm
Stylus Pressure Variable Range: 0-4 g (1 scale 0.1 g)
Proper Cartridge Weight:
Cartridge type: VM
Terminals
Outputs: 1 PHONO/LINE (RCA)
USB: 1 USB B port | -Newly developed top panel and reinforced housing construction
-Reworked metallic buttons with improved feel & tactile response
-USB audio output for digitizing your records easily
- Newly developed top panel and reinforced housing construction
- Reworked metallic buttons with improved feel & tactile response
- Precision Pitch with selectable ranges of +/-8 %
- Superior finish in deep black metallic
- Quartz-driven DJ turntable with direct drive
- Perfect for beginners
- USB audio output for digitizing your records easily
- Precise motor control with 2 speeds selectable (33 1/3 & 45 rpm)
- Precision-engineered, die-cast aluminium platter with stable rotation
- Statically balanced s-shaped tone arm with hydraulic lift and anti-skating - mechanism
- Universal connection for pick-up systems (SME)
- Extendible needle illumination
- Built-in phono pre-amplifier (no grounding necessary)
- Switchable phono and line level output
- Shock-absorbing feet for vibration isolation
- Sturdy, heavy construction with optimized damping features
Turntable:
- Type: direct drive turntable
- Drive: quartz-driven direct drive
- Motor: 8-pol., 2-phase, brushless DC motor
- Turntable speeds: 2 speeds, manual (33 1/3, 45 RPM)
- Starting torque: > 1kg/cm
- Brake time: < 1 sec.
- Start-up / rpm change: < 1 sec.
Platter:
- Material: aluminium die-cast
- Diameter: 332 mm
Connections:
- 1x PHONO/LINE out (gold-plated)
Accessories included:
- Platter, OM Black pick-up system (by Ortofon), headshell, slipmat, counterweight, power cord,
operating instruction manual
|
Reviews
There are no reviews yet.