| Content | Stanton T.92 USB M2 is a direct-drive turntable with built-in USB interface and pitch control fader key lock. The DSP in this turn table makes it possible to automatically adjust the pitch of the output signal: if the vinyl is slowed down or played the pitch will no longer change with it! This feature is of course only available on the S / PDIF, USB and line outputs.
The T.92 USB M2 includes a Stanton 300 cartridge mounted on a headshell. In addition, there is a RCA cable, slip mat, USB cable and dust cover in the box. Also included is the Deckadance DVS software.
Details
- Professional turntable with direct drive motor
- 1.6 kgf/cm torque
- Sturdy construction
- USB and S / PDIF outputs to easily digitize vinyl
- Pitch Control Fader with DPS tone lock (adjust the tempo without changing the pitch!)
- Pitch range (+/- 8%, 12%)
- Stanton 300 cartridges supplied mounted on headshell
- S-shaped tone arm for lower distortion and superior audio quality
- 33, 45, and 78 rpm with quartz lock
- RCA stereo output (Phono / Line), pitch control only works on line output
- 2 Start / stop buttons for mic or battle setup
- Includes RCA cable, slip mat, USB cable and dust cover
- Full version of Deckadance DVS software included
| Type: |
Direct Drive |
| Motor: |
8 pole, 3phase, brushless DC motor |
| Driving Method: |
Direct Drive |
| Speeds: |
33 1/3, 45 and 78 rpm |
| Pitch Controls: |
+/-8%, +/-12% |
| Audio Output: |
Phono/Line and SPDIF |
| Cartridge-Stylus: |
Stanton 300 |
| Βrake: |
Ναι |
| Arm: |
S-shaped |
| Included Accessories: |
Includes RCA cable, slip mat, USB cable and dust cover |
| Τype: |
Direct Drive |
| Αrm: |
''S'' Type |
| Speed: |
33,45,78 RPM |
| USB Connectivity: |
Υes |
| AT-LP120X
Manual Direct-Drive Turntable (Analogue & USB)
- Direct-drive, DC servo motor
- Fully manual operation
- Adjustable dynamic anti-skate control
- Selectable 33/45/78 RPM speeds
- Convert records to digital files via the USB output
- Professional anti-resonance, die-cast aluminium platter with felt mat
| Cartridge & Stylus |
| Replacement Stylus |
VM95 Series |
| Turntable |
| Type |
fully manual |
| Motor |
DC servo-controlled |
| Speeds |
33-1/3 RPM, 45 RPM, 78 RPM |
| Pitch Variation |
+/-8% or +/-16% |
| Turntable Platter |
Die-cast aluminum |
| Starting Torque |
>1.0 kgf.cm |
| Braking System |
Electronic brake |
| Wow and Flutter |
50 dB |
| Output Level |
Pre-amp "PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE”: 240 mV nominal at 1 kHz, 5 cm/sec |
| Phono Pre-Amp Gain |
36 dB nominal, RIAA equalized |
| USB Function |
PC or Mac with an available USB port (USB1.1 or higher)
Windows 7 or above, or Mac OS X or above A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable;
Computer interface – USB 1.1 Compliant Windows 7 or above, or MAC OS X or above |
| Power Supply Requirements |
115/230V AC, 60/50 Hz |
| Power Consumption |
2.75 W |
| Dimensions |
141,6 x 452 x 352 (H x W x D mm) |
| Weight |
8.0kg |
| Accessories Included |
AT-VM95E phono cartridge AT-HS6 headshell 1.9 m (6.2\') USB cable dual RCA (male) to dual RCA (male) cable with ground wire counterweight felt mat; dust cover 45 RPM adapter |
|
- Type: direct drive turntable
- Drive: quartz-driven high-torque direct drive
- Motor: 8-pol., 3-phase, brushless DC motor
- Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 rpm)
- Starting torque: > 1.8 kg/cm
- Brake time: < 1 sec.
- Start-up / rpm change: < 1 sec.
- Wow and flutter: < 0.2 % WRMS
- Signal-to-noise ratio: > 50 dB (DIN-B)
- Brake system: electronic brake
Platter:
- Material: aluminium die-cast
- Diameter: 332 mm
|
- Accurate playback
- Direct-drive motor
- Vertical tracking
- Adjustable insulator feet
- Solid construction
- Removable dust cover
General
- Colors Dark ebony
- Dimensions 500 x 394 x 185mm (W x D x H)
- Weight 18.5 kg
- Power Supply AC 100-240V, 50/60Hz
- Power consumption <4W
- Stdby Power consumption Less than 0.3W
- Carton maximum Dimensions 615 x 515 x 335 mm (W x D x H)
- Carton Weight 24.0 kg
- What's in the box Platter mat, Dust cover, Power cable, RCA cable and ground cable, Headshell, Overhang gauge, Screw set for cartridge mount (10, 13, 18mm), 2 x Cartridge spacers (1 mm), 2 x Plastic Washer, Screw driver, Counter weight, Sub-counter weight, Denon EP adapter/weight
| Features of Limited Edition SL-1200M7L models
- Exclusive accessories on the Limited Edition model, including the gold logoed skateboard
- Direct drive motor without iron core for perfectly smooth motion and consistent, powerful torque
- Extremely sensitive yet robust tonearm with high internal damping and precision tonearm bearings for precise capture of the finest musical notes in the record groove
- Double layer plate with improved resonance damping
- Extremely rugged construction and effective vibration isolators to keep annoying vibrations at bay even in harsh conditions
- Adjustable starting torque and deceleration speed
- Pitch control function: allows precise adjustment and continuous control of rotation speed
- "Reverse playback mode" for creative DJ performances
- Needle illumination by bright, long-life LED | TECHNICS SL-1210 GR Direct Drive Turntable WITH 2M QUINTET BLUE CARTRIDGE
The directly driven Technics SL-1210GR has an extremely high quality core and brushless motor for a vibration-free drive. The Technics SL-1210GR becomes a real heavyweight thanks to the superbly crafted 2-layer sandwich chassis and the heavy-duty aluminium die-casting plate, which is rubber-coated inside for resonance damping. High-quality RCA sockets and a connection for the power cord make the hearts of HiFi fans beat faster.
The high-end turntable is equipped with the medium-heavy, S-shaped aluminium arm - including removable headshell with SME connection. The tonearm is light and easily height-adjustable.
Extreme robustness, fast start-up times and the easy assembly of different pickups are still the hallmarks of Technics turntables today. Older records are also reproduced in an impressive width.
A beautifully designed bonnet with the legendary arch over the tonearm is also included.
Features Technics SL-1210 GR
- Technology for high rotational stability
- Ironless direct drive motor
- High precision motor control
- Vibration tolerant construction
- Vibration absorbing platter plate
- Robust housing construction
- Silicone rubber cushioning feet
- High quality components
- Highly sensitive tone arm
- Gold plated connectors
TECHNOLOGY FOR ROTATIONAL STABILITY
- Coreless Direct Drive Motor
- High-Precision Motor Controller
CONSTRUCTION FOR VIBRATION TOLERANCE
- High-dampening Turntable Platter
- Rigid Cabinet Construction
- Silicon Rubber Insulator
HIGH QUALITY PARTS
- High Sensitive Tonearm
- Gold--plated Detachable Terminals
TECHNICS DEFINITIVE DESIGN
TURNTABLE SECTION
- Type: Direct Drive Manual Turntable
- Turntable Speeds: 33 1/3, 45, 78 r/min
- Adjust Range: ±8%, ±16%
- Starting Torque: 2.2 kg･cm
- Build-up Characteristics: 0.7 s. from standstill to 33 1/3 r/min
- Wow and Flutter: 0.025% W.R.M.S.
- Rumble: 78dB (IEC 98A Weighted)
- Turntable Platter: Aluminum die-cast
Diameter：332mm
Weight：Approx. 2.5kg (Including rubber sheet)
TONEARM SECTION
- Type: Universal, Static Balance
- Effective Length: 230mm • Overhang: 15mm
- Tracking Error Angle:
Within 2° 32\' (at the outer groove of 30cm record)
Within 0° 32\' (at the inner groove of 30cm record)
- Offset Angle: 22°
- Arm Height Adjustment Range: 0 - 6mm
- Stylus Pressure Adjustment Range: 0 - 4g (Direct Reading)
- Head Shell Weight: Approx. 7.6g
- Applicable Cartridge Weight Range:
[without auxiliary weight] 5.6 - 12.0g (14.3 - 20.7g (including head shell))
[with auxiliary weight] 10.0 - 16.4g (18.7 - 25.1g (including head shell))
- Cartridge Mounting Dimension: JIS 12.7mm, interval • Head Shell Terminal Lug: 1.2mmφ 4-pin terminal lug
TERMINALS
- Audio Output: PHONO (Pin Jack) x 1, EARTH TERMINAL x 1
GENERAL
- Dimensions (W x H x D): 453 x 173 x 372 mm
- Weight: Approx. 11.2kg
|
Reviews
There are no reviews yet.