Content |
The over-ear, open-back AKG K245 feature a transparent, yet spacious sound, and you’ll find them perfect for mixing and editing on the go. Just pick them up and you’ll immediately find the roadworthy design takes away the worry of damage while traveling. Try them on and you’ll realize they still provide the superior studio-quality sound you expect from AKG. And you’ll never get tired of wearing AKG Foldable Studio Headphones because their ergonomic design provides a comfortable fit?even during long sessions. | 80 Ohm specs
- Type Over-ear (Closed)
- Channels Stereo
- Noise isolation 18 dB reduction
- Connections 3.5mm stereo, 6.25mm stereo
- Weight 9.52 oz
General
- Type Over-ear (Closed)
- Cable type Y-cable
- Channels Stereo
Other features
- Plug type Straight
- Gold-plated connector Yes
Audio quality
Noise reduction
- Noise isolation 18 dB reduction
Connections
- Connections 3.5mm stereo, 6.25mm stereo
| K 240 Studio
The Studio version of these classic hi-fi stereo headphones uses XXL speakers
with Varimotion diaphragms for higher sensitivity, a wider dynamic range, and
higher sound levels. Other features include semi-open earphones, a solid bass
range, clear highs, and excellent comfort.Also connects to portable equipment
(CD players, DAT recorders, notebook computers, etc.)
SPECIFICATIONS:
General Specifications
Headphone type: semi-open
Max. Input Power: 200 mW
Sensitivity headphones: 104 dB SPL/V
Rated Impedance: 55 Ohms
Detachable cable: yes
Cable Length: 3 m
Earpads replaceable: yes
Audio Specifications
Maximum input power: 200 mW
Audio frequency bandwidth: 15 - 25000 Hz
Dimensions
Length: 110 mm
Width: 190 mm
Height: 200 mm
Net Weight: 240 g
Audio Interface
Type: Stereo plug – 3.5mm (1/8-inch) with 6.3 mm (1/4") screw-on adapter
Gender: Male
Contacts: 3-pin
Cable
Detachable: Yes
Wearing Style
Over-ear: Yes
Application
Studio Mixing: Yes
Hi-Fi Listening: Yes
Foldable
Not foldable: Yes
Cup Style
Semi-open: Yes |
Operating Principle: Closed
Transmission Type: Wired
Earpad material: Protein leatherette cover, memory foam filling
Nominal Impedance Headphones: 32 ohms
weight headphones without cable: 360 g
Headphone frequency response: 5 - 50,000 Hz
Nominal sound pressure level: 100 dB (1mW)
Sound coupling to the ear: Circumaural (around the ear)
Cable & Plug: 1.40 straight cable (double-sided), OCC 7N copper, textile braided, 3.5 mm jack plug with 6.35 mm jack adapter
| DT770 Closed headphone for drummers and monitoring purposes (FOH), with extreme isolation against ambient noise.
The dynamic, closed DT 770 M has especially been designed for drummers and FOH monitoring. The strengthened headband and the softskin ear pads provide an excellent isolation against ambient noise. The single sided straight cable allows a volume control directly at the headphone.
▲ Closed headphone
▲ Excellent ambient noise attenuation (35 dBA)
▲ Superb sound quality with high sound pressure level (105 dB)
▲ Extended frequency range
▲ Single-sided cable with volume control
▲ Robust, easy serviceable construction as all parts are replaceable
▲ Excellent comfort for long-term wearing, softskin ear pads
▲ Secure and comfortable fit due to rugged, adjustable headband construction with soft padding
▲ Single-sided cable
▲ Supplied in a carrying case (nylon)
Transmission type |
|
Wired |
Headphone design (operating principle) |
|
Closed |
Headphone impedance |
|
80 ohms |
Headphone frequency response
The frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones. |
|
5 - 30.000 Hz |
Nominal sound pressure level
The (nominal) sound pressure level is the pressure in pascals (Pa) with which the air and the eardrum are caused to vibrate, better known as the volume. The sound pressure level is therefore a measure of the volume of a set of headphones under standardized conditions. However, it says nothing about whether the distortion is low and the sound is good at such a high volume. |
|
105 dB |
Construction |
|
Circumaural (around the ear) |
Cable & plug |
|
Straight connecting cable with mini-jack plug (3.5 mm) & ¼" adapter (6.35 mm) |
Net weight without packaging |
|
300 g |
| Beyerdynamic DT 150
The DT 150 is a dynamic studio headphone for use in broadcasting, film and recording studios
and other audio monitoring applications where size, comfort and performance are primarily requirements.
Due to its closed design it features excellent ambient noise isolation for reference monitoring.
- Transducer type: Dynamic
- Operating principle: Closed
- Frequency response: 5 - 30,000 Hz
- Nominal impedance: 250 Ω
- Nominal SPL: 97 dB
- Power handling capacity: 100 mW
- Sound coupling to the ear: Circumaural
- Headband pressure: 4.5 N
- Ambient noise attenuation: approx. 20 dBA
- Weight (without cable): 250 g
|
Reviews
There are no reviews yet.