| Content |
2.5-way 6.5" Center Channel Loudspeaker
* Dual 165mm (6.5“) PolyPlas low-frequency transducers
* High Definition Imaging (HDI) horn design - 25mm (1“) CMMD® Lite high frequency dome, Recommended amplifier power: 20 – 150W
* 55Hz – 22kHz, 91dB, 8 Ohms, Slipstream rear-firing bass port, Gold-plated binding-post speaker terminals, 194mm x 645mm x 249mm,
Weight: 11.9 kg |
Power handling (watts): 170 (RMS)
Sensitivity (dB): 90
Nominal impedance (ohms): 8
Magnetically shielded
W x H x D (mm): 480 x 178 x 195
Weight (kg): 9
Frequency response (Hz): 35 - 45,000
Connections: Gold-plated 4mm banana socket/binding posts
Bass port Rear reflex
Drivers: HF: Dual ring-radiator design
LF: 2 x 130mm pressed allow cones with twin Neodymium magnets and long throw voice coil
Supplied accessories: Removable grille
Finish: black ash/ walnut |
Frequency Response: 45Hz- 100kHz
Sensitivity (1W@1M): 89 dB
Nominal Impedance:
4 Ohms
Maximum S.P.L
(Per pair in room): 112.8 dBA
Power Handling (RMS): 200 W
Recommended Amplifier Requirements (RMS): 60 - 200 W
Bass Alignment: Rear Ported HiVe II Technology
Mid / H.F Crossover Frequency: 1800 Hz
Bass Low Pass Crossover Frequency: 250 Hz
Drive Unit Complement: 2 x 6 1/2" RDT bass/mid-range driver
1 x C-CAM high frequency ribbon transducer
External Dimensions -
Excluding Stand: Width: 583mm (22 15/16 inches)
Height: 225mm (8 7/8 inches)
Depth: 291.2mm (11 7/16 inches)
Stand Dimensions: Width: 610mm (24 inches)
Height: 335mm (13 13/16 inches)
Depth 463mm (18 1/4 inches)
Weight: 19 Kg (41.8lbs)
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual AVAILABLE IN THESE COLOR FINISHES ![colors]( "colors")
|
The perfect complement to a full SX-series surround sound speaker set, the Cambridge Audio SX70 is the natural choice.
CRISP AND CLEAR SOUND FOR ARTICULATE VOCALS
Featuring a silk dome tweeter, the Cambridge Audio SX70 offers a smooth response that\'s essential for clear, accurate dialogue. Even during intense scenes in action movies, the dialogue can still clearly be heard.
TWIN WOOFERS FOR BROAD STAGING
Using two woofers, placed either side of the tweeter, gives the SX70 a wide soundstage, meaning that it connects up with your front speakers seamlessly. Now, when a jet aircraft rushes across the screen, the sound will follow from left to centre to right without a break.
TOP QUALITY CONSTRUCTION FOR LASTING APPEAL
Made from dense, MDF (Medium Density Fibreboard) rather than flimsy chipboard, the SX70s are built to last. That solid construction also has a knock-on effect in helping to improve the sound quality through higher cabinet rigidity. Other neat design features that we love include the recessed drive units with hidden fixing bolts, making sure the front the panel looks every bit as smooth as the sound.
PART OF THE SX-SERIES AND SO IDEAL FOR SURROUND SOUND SYSTEMS
With floorstanding and standmount sound speakers available, the Cambridge Audio SX70 is ideal as part of a surround sound speaker system. With a similar sonic balance to the other SX-series speakers you get a smooth, uniform sound right the way around your room for a totally enveloping sound.
| Magnetically Shielded |
Are they magnetically shielded? Allows speaker to be placed near a CRT TV/Monitor or sensitive magnetically stored data without the risk of damage. |
|
| Sensitivity (dB) |
The higher this figure is the easier the speaker is to drive and, hence, requires a less powerful amplifier |
85 |
| Impedance (ohms) |
Resistance. A standard figure is 8ohms |
8 |
| Bi-wireable |
Is it bi-wirable? Separate earthing cables for tweeter and woofer units - gives a more precise sound when used with bi-wire cable |
|
| Power Rating (Watts) |
Maximum power output long term/short term (RMS) |
100 |
| Dimensions |
Dimensions of speaker cabinet (W x D x H) in mm |
360w x 246d x 138h |
| Weight |
Weight of speaker, unboxed, in KG |
4 |
| Black |
Does the speaker come in a black finish? |
|
| Wood |
Does the speaker come in a wood or wood style finish? |
|
| Other Colour |
Does the speaker come in another coloured finish? |
|
| Freq Response (Hz) |
The lower the first figure the deeper the bass should be |
65 - 20,000 |
| Speaker Enclosure Type |
Type of speaker enclosure. Infinite baffle cabinets are sealed and so are often less fussy about placement. Usually they do require a little more power to drive, though. Bass reflex speakers are usually more efficient than infinite baffle designs but may require more care in terms of placement. Rear port designs, in particular, usually need at least 15-30cm (6 - 12 inches) between them and the wall behind, for a balanced bass response. ABR = Auxcillary Bass Radiator (looks like a standard bass cone but without power) |
Infinite baffle (sealed) |
|
Frequency Response: 32 Hz - 100 KHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance:
4 Ohms
Maximum S.P.L
(Per pair in room): 117.8 dBA
Power Handling (RMS): 250 W
Recommended Amplifier Requirements (RMS): 100 - 250 W
Bass Alignment: Twin Ported HiVe II Technology
Sealed Mid-range TLE
Mid / H.F Crossover Frequency: 4000 Hz
Bass Low Pass Crossover Frequency: 550
Drive Unit Complement: 2 x 8 long-throw RDT bass drivers
1 x 4" RDT Mid-range driver
1 x C-CAM high frequency ribbon transducer
External Dimensions -
Excluding Stand (H x W x D): 288 x 800 x 368 mm
(11 5/16 x 31 1/2 x 14 1/2 inch)
Stand External Dimensions -
Including Plinth Feet
(H x W x D): 335 x 610 x 463 mm
(13 13/16 x 24 x 18 1/4 inch)
Weight: 33.5 Kg (73.8lbs)
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual AVAILABLE IN THESE COLOR FINISHES ![colors]( "colors")
|
Tweeter 1¨Dynamic Balance Ring Radiator x1
Mid/Woofer 5 ¼ ¨ Dynamic Balance x2
Frequency Response 40Hz - 27kHz
Nominal Impedance 4 Ohms
Rec. Amplifier Power 20-200 W/Channel
Sensitivity 88dB
Dimensions (cm) 17.78x 55.24 x 22.86
|
Reviews
There are no reviews yet.