KRK 10-S2 Active Studio Subwoofer ( Piece )

For years, KRK subwoofers have been the choice for accurate low frequency monitoring in studios large and small. Now, the KRK10s provides a new standard for even better performance and accuracy, raising the bar once again.

KRK's KRK10s powered subwoofer is the perfect complement to KRK ROKIT, VXT, or any other 4“-8" studio monitor. The KRK10s is designed to extend the low-frequency performance of an existing monitor system so that the low-frequency portion of the mix can be properly engineered. The KRK10s also feature a great looking cabinet that echoes the curved edges of the ROKIT and VXT monitors. The front-firing bass port and KRK's trademark yellow glass-aramid composite woofer ensure accurate and powerful low-end punch. A sturdy grill protects the woofer and adds to the sleek appearance of the unit. A high-power amplifier and active crossovers provide smooth and accurate reproduction.

Product details
Woofer:    10-inch Paper Cone
Frequency response:    20Hz – 40Hz ~ 120Hz
Crossover frequency:    40-120Hz adjustable
Lf - Amplifier Power:    300W
Signal LF:    >90dB
THD + N @ Rated Power LF:     0.08%
Inputs:    2x XLR,2x TRS,
2x RCA Connectors,
S/PDIF Connector
for digital signal
Outputs:    2x XLR, 2x TRS
2x RCA Connectors, S/PDIF - RCA jack for digital signal thru
Input Impedance:    20 kOhm balanced, 10 kOhm unbalanced
Input Sensitivity:    +4 dBu (Balanced), -10dBV (unbalanced)
Phase reverse:    0° /180° switch
Available colors:    Red, Black
Gross Weight:    22.4kg / 49.2lb
Net weight:    18.7kg / 41.1lb
Gross Dimensions:    L500 x W523 x H523 mm
L19.68x W20.59 x H20.59 in
Net Dimensions:    L374 x W368 x H383 mm
L14.72 x W14.49 x H15.08 in

7" Subwoofer

Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and have put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.

So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.

All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.

Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.

The TS107 is the smallest model in the range of EVE Audio subwoofers and features a very efficient 100W PWM amplifier that drives a proprietary 6.5" woofer. This guarantees a frequency response of down to 36Hz up to 300 Hz, for a maximum output power of 102 dB (SPL @ 1m).

The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.

All in all, the ThunderStorm subwoofers will make any system sound better and more complete.

As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.

The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.

Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.

The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.

Product details
Woofer:    10-inch Paper Cone
Frequency response:    20Hz – 40Hz ~ 120Hz
Crossover frequency:    40-120Hz adjustable
Lf - Amplifier Power:    300W
Signal LF:    >90dB
THD + N @ Rated Power LF:     0.08%
Inputs:    2x XLR,2x TRS,
2x RCA Connectors,
S/PDIF Connector
for digital signal
Outputs:    2x XLR, 2x TRS
2x RCA Connectors, S/PDIF - RCA jack for digital signal thru
Input Impedance:    20 kOhm balanced, 10 kOhm unbalanced
Input Sensitivity:    +4 dBu (Balanced), -10dBV (unbalanced)
Phase reverse:    0° /180° switch
Available colors:    Red, Black
Gross Weight:    22.4kg / 49.2lb
Net weight:    18.7kg / 41.1lb
Gross Dimensions:    L500 x W523 x H523 mm
L19.68x W20.59 x H20.59 in
Net Dimensions:    L374 x W368 x H383 mm
L14.72 x W14.49 x H15.08 in

To hear what's really going on at the bottom of your mixes, you need a subwoofer that speaks the truth. The TemblorTM T10 lets you take charge of the low-frequency foundation of your mix with a combination of quality components and design, plenty of inputs and outputs, and extensive user controls not normally available in this price range.
Main components

• 10-inch glass-composite low-frequency transducer
• Front-firing, bass-reflex acoustic port
  

• Input gain control (-30 dB to +6 dB, continuously variable)
• Continuously variable lowpass filter (50 Hz to 130 Hz)
• Built-in crossover
• Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the T10 outputs to the main monitors
• Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
• Polarity invert and ground-lift switch
  

• 250 watt, Class AB amplification
• Internal damping and heat sink
• Integrated, gravity-calibrated rubber feet for stable placement
  

• Left and right, balanced XLR and ¼" TRS and unbalanced RCA main inputs
• Left and right balanced XLR and ¼" TRS outputs 
• XLR subwoofer output for connecting a second T10

Product details