Content |
Pressure vessel enclosure
500W ICEpower® amplifier
Switch mode power supply
Description Active closed-box subwoofer system
Drive unit 2x f200mm (8 in) mica / aluminium diaphragm long-throw
Frequency range -6dB at 18Hz and 40/140Hz adjustable (EQ at i)
Frequency response ±3dB 21Hz – 31/110Hz adjustable (EQ at i)
Power output: 500W
Rated power consumption: 110W (105W - 100V version)
Input impedance: 100kΩ
Signal / noise: >90dB
Functions: Volume level
Low-pass filter frequency
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Speaker Level In (FCC68 4/4)
| Hxείο Sub, high Fidelity, 300 Watts Continuous Program Power (2 hrs) 150 Watts ContinuousPink Noise (2 hrs)200 Watts Continuous Program Power (100 hrs) 100 Watts Continuous Pink Noise (100 hrs), 115dB average, 121dB peak (near corner) 109dB average, 115 dB peak (center of wall) 32 Hz ? 200 Hz +-3dΒ Eπιλογή λειτουργίας 70/100v/, 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru, με 1 woofer 200 mm (8 in) με polypropylene cone, ανάρτηση butyl rubber, με πηνίο φωνής 38 mm (1.5 in) 4-layer copper-clad, και αεριζόμενο former αλουμινίου. Διαστάσεις: 356 x 391 x 203 mm. Περιέχεται βάση στήριξης. Χρώμα Μαύρο-Λευκό. Μπορεί να λειτουργήσει με 2 ή 4 δορυφόρους ?ηχεία, και σε συνδυασμό με ηχεία οροφής της σειράς 40 της JBL. Βάρος 9kg. |
System Format: Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment Low Frequency Limit: 18 Hz Upper Frequency Limit: 40 - 120 Hz Variable Low Pass Filter Alignment: Active 4th order 24dB/octave (6/12/18/24 dB user adjustable) Amplifier Power Output 650 watts Continuous. 1200 watts (peak) Amplifier Classification D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu) Equalisation 4 Settings (Off/Music/Movie/Impact) Phase Control 0-90-180-270 degrees Auto Sensing Input Level Requirements Line Level > 2mV. Standby after 10 minutes if no signal sensed Digital Volume Level -60 to +10dB in 1dB increments Drive Unit Complement 1 x 15” C-CAM® sub-woofer driver featuring triple suspension 3” long throw voice coil 12V Trigger Input 3.5mm mono jack socket Connections Stereo RCA in/out LFE in/out 12V Trigger in (3.5mm mono jack) LEO* - 3.5mm Microphone input jack (microphone supplied) Input Impedance 20 kohms Dimensions (H x W x D) 430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches) Grille Depth 28 mm (1 1/8 Inches) Weight (unpacked) 35.3 kg (77.6 lbs) Mains Input Voltage 100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset) Electrical Certifications CE/CB/ETL/Fcc/ErP (Energy saving compliant) Power Consumption Maximum 1000W. Standby Fuse Type 20mm UL/VDE (Value is region specific) IR Remote Control Code NEC SH6122 AVAILABLE IN SIX COLOR FINISHES
|
Dimensions | Metric :10-1/4” W x 10-1/4” D x 10-1/4” H | 26.0 x 26.0 x 26.0 cm
Driver Complement :One high-definition 7-1/2" long throw woofer, pressure coupled to two 7-1/2” low bass radiators
Frequency Response :16 Hz – 200 Hz
Internal Amplifier Power :650 watts
Auto On / Off :Signal Sensing (US) | Signal Sensing and Switched (International)
Power Requirements :110 volts Alternating Current (US) | 220 volts Alternating Current (International)
High Level Inputs :5 way binding posts
High Level Outputs :5 way binding posts
Subwoofer Inputs :One LFE input (for SW preout only)
Low Level Inputs :Two low level inputs: left and right low level in
Low Level High Pass Crossover :12 dB/octave continuously variable from 40 Hz to 150 Hz: Available only with low level inputs and outputs
Low Pass Crossover% :24 dB/octave continuously variable from 40 Hz – 150 Hz:
Available Finishes :Piano-Gloss Black
Accessories :Rubber feet; Isolation spikes
Fuse :8 amp 250 volt Slo Blo (US) | 4 amp 250 volt Slo Blo (International)
Weight | Metric :25 lbs | 11.3 kg
Warranty :5 Years; 3 Years for Amplifiers |
The ASW610 subwoofer presents a very happy medium between the more diminutive ASW608 and the all-out power of the ASW610XP. Its long-throw 250mm driver allows the ASW610 to move the large volumes of air needed for high-quality low-frequency output, and its audiophile-standard 200W Class D amplifier keeps the compact unit running cool, even when the music or movie action is whipping up a storm.
In all of the 600 Series subwoofers, the bass driver diaphragms are constructed from a rugged, finely-tuned mix of paper pulp, Kevlar® fibres and resin, which provides the stiffness needed to withstand the tremendous physical forces exerted by the voice coil and pressures inside the cabinet.
Ultra-solid construction delivers slamming bass, drum kicks, and special movie effects. Deformation is minimised; bass precision, power and enjoyment are maximised.
Description | Active closed-box subwoofer system |
---|
Drive unit | ø250mm (10 in) paper/Kevlar® cone long-throw | Frequency range | -6dB at 20Hz and 25/140Hz adjustable (EQ at A) | Frequency response | ±3dB 27Hz – 40/140Hz adjustable (EQ at A) | Bass Extension | -6dB at 20Hz (position A) |
| -6dB at 25Hz (position B) |
| -6dB at 30Hz (position C) | Amplifier |
| Power output: | 200W | Rated power consumption: | 40W / 0.5W standby | Input impedance: | 33kΩ | Signal / noise: | >90dB | Functions: | Input level (line in) |
| Input level (speaker in) |
| Low-pass filter frequency (line in only) |
| Low-pass filter bypass |
| Bass extension |
| Bass roll-off alignment |
| Auto sense on/standby |
| Phase switch | Inputs: | Line In (RCA Phono) |
| Speaker in (Binding post) |
| 12v trigger (3.5mm jack) |
| Low-pass filter |
| Active 4th-order, variable cut-off frequency | Dimensions | Height: 310mm (12.2 in) not including feet |
| Width: 310mm (12.2 in) |
| Depth: 375mm (14.8 in) including grille and controls | Net weight | 12.5kg (27.6 lb) | Finishes | Black Ash Vinyl |
| Red Cherry Vinyl | |
Technical features 500W class 'D' power amplifier
Description Active closed-box subwoofer system
Drive unit 1x f250mm (10 in) paper / Kevlar® cone long-throw
Frequency range -6dB at 18Hz and 40/140Hz adjustable (EQ at A)
Frequency response ±3dB 25Hz – 40/140Hz adjustable (EQ at A)
Power output: 500W
Rated power consumption: 94W
Input impedance: 33kΩ
Signal / noise: >80dB
Functions: Input Level (line in)
Input Level (speaker in)
Low-pass filter frequency
Low-pass filter bypass (line in only)
Bass extension
Bass roll-off alignment
Auto sense on/standby
Phase switch
Inputs: Line In (RCA Phono)
Speaker Level In (Binding post)
Low-pass filter Active 4th-order, variable cut-off frequency
Height: 325mm 12.8 in)
Width: 325mm (12.8 in)
Depth: 362mm (14.3 in)
Net weight 15.5kg (34.4 lb)
Cabinet Gloss Black
AVAILABLE IN gloss black,wenge,rozenut COLORS
|
Reviews
There are no reviews yet.