SUPERLUX PS-418-D BATTERY PHANTOM POWER SUPPLY FOR TQG Mic MINI XLR 3pin To XLR Male

37.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
PS418D Pre-Amplifier The condenser miniature microphones, need phantom power to work. The PS418D is just what they need. It can be powered by phantom power or battery, and switchable low cut filter helps to reduce low band noise. Features: • Two options for Power Requirements: phantom or battery. • Low-cut filter switch. • Transistor output […]

 

Read more

PS418D
Pre-Amplifier
The condenser miniature microphones, need phantom power to work. The PS418D is just what they need. It can be powered by phantom power or battery, and switchable low cut filter helps to reduce low band noise.
Features:
• Two options for Power Requirements: phantom or battery.
• Low-cut filter switch.
• Transistor output transformer circuit.
Specification:
Frequency Response: 25-20,000 Hz
Output Impedance: phantom 200Ω; battery 270Ω
Min. Load Impedance : 1000Ω
Power Requirements: phantom 9-52VDC,2mA; battery 1.5V AA/UM3
Low Frequency Filter: 80Hz @ 12dB / oct
Connector: TA3M (input), XLR3M (output)
Dimension(WxHxD): 63X84X22.5mm (2.48″x3.3″x0.89″)
Weight: 245 g
Packaging: white box
Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “SUPERLUX PS-418-D BATTERY PHANTOM POWER SUPPLY FOR TQG Mic MINI XLR 3pin To XLR Male”

Your email address will not be published. Required fields are marked *

Quick Comparison

SUPERLUX PS-418-D BATTERY PHANTOM POWER SUPPLY FOR TQG Mic MINI XLR 3pin To XLR Male removeGravity MA 3D A POP 1 Traveler 3D Arm with Pop Filter removeSENNHEISER K-6P PHANTOM POWER ONLY MODULE removeAKG AC 12/EU 12V AC-ADAPTER removeAudio Technica ATND8677 Microphone desk stand with Dante™ network output removeGRAVITY MA 3D A Traveler 3D Arm remove
NameSUPERLUX PS-418-D BATTERY PHANTOM POWER SUPPLY FOR TQG Mic MINI XLR 3pin To XLR Male removeGravity MA 3D A POP 1 Traveler 3D Arm with Pop Filter removeSENNHEISER K-6P PHANTOM POWER ONLY MODULE removeAKG AC 12/EU 12V AC-ADAPTER removeAudio Technica ATND8677 Microphone desk stand with Dante™ network output removeGRAVITY MA 3D A Traveler 3D Arm remove
ImageGMA3DAPOP1_Gravity-MA-3D-A-POP-1-Traveler-3D-Arm-with-Pop-Filter
SKUPS418DGMA3DAPOP1H10SE00026AC 12/EUATND8677GMA3DA
Rating
Price37.00 incl. GR VAT 20.85 incl. GR VAT 185.00 incl. GR VAT 42.00 incl. GR VAT 529.00 incl. GR VAT 19.23 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Only 4 left in stock

AvailabilityIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderOnly 4 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Pop filter with double nylon mesh
  • Large screen diameter of 157 mm
  • Tilt and rotation of joints can be adjusted
  • Flexible clamping range from 15 mm to 35 mm
  • Easy to handle
  • Tilt and rotation of joints can be adjusted
  • Flexible clamping range from 15 mm to 35 mm
  • Various applications due to 3/8" thread
  • Easy to handle
Content
PS418D
Pre-Amplifier
The condenser miniature microphones, need phantom power to work. The PS418D is just what they need. It can be powered by phantom power or battery, and switchable low cut filter helps to reduce low band noise.
Features:
• Two options for Power Requirements: phantom or battery.
• Low-cut filter switch.
• Transistor output transformer circuit.
Specification:
Frequency Response: 25-20,000 Hz
Output Impedance: phantom 200Ω; battery 270Ω
Min. Load Impedance : 1000Ω
Power Requirements: phantom 9-52VDC,2mA; battery 1.5V AA/UM3
Low Frequency Filter: 80Hz @ 12dB / oct
Connector: TA3M (input), XLR3M (output)
Dimension(WxHxD): 63X84X22.5mm (2.48"x3.3"x0.89") Weight: 245 g
Packaging: white box

Gravity MA 3D A POP 1 Traveler 3D Arm with Pop Filter

The Traveler Series' Pop Filter with 3D Arm Every bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on the concert venue having the right tool available for you when needed. The Pop Filter with 3D Arm MA 3D A POP 1 can be taken everywhere you go. It's so light and space-saving, there's absolutely no need for you to worry about weight or storage space. With this tool you can enhance your voice- and vocal recordings by placing the high-quality pop filter, with double nylon mesh and a large screen diameter of 15.7 cm between you and your microphone. This way you avoid unwanted pop noises and clipping. Its fastening mechanism is quick and easy to assemble. The large clamping range from 15 to 35 mm lets you mount it on all popular microphone stands, and the three joints' 360° rotation options allow you to install it as you like. Simply loosen, adjust and tighten the wing-screws. Voila - you're all done! Once set, the MA 3D A POP 1 stays locked in place. Gravity® has once again delivered a small, useful and reliable product for you to round off your collection of stands.  
Product type Microphone Accessories
Type Pop filter
Material Plastic, Polyamide
Color Black
Joint adjustment Wing screw
Joint rotation 360°
Joint tilt 180°
Arm length 400 mm
Suitable for mounting on Microphone Stands
Thread size 3/8”
Screen diameter 157 mm
Setup Double nylon screen, plastic frame
Suitable for tube diameter 15 - 35 mm
Weight 0,377 kg
     

The K6P powering module is at the heart of Sennheiser's professional modular
condenser microphone system. It is similar to the K6 powering module but is
powered by 12 - 48 V phantom power only, for use where battery power is not
required (e.g. permanent installations). The K6P can be combined with various
microphone heads to produce microphones with a variety of pick-up patterns.
Matt black, anodised, scratch-resistant finish.
Profile
Powering module for phantom powering with switch-able roll-off filter suitable for
ME 62 - ME 67 microphone heads and -60 versions of MKE microphones,
transmission factor 0 dB at 1 kHz, nominal impedance 200 Ohm, min. terminating
impedance 1 kOhm, max. output voltage 2 V (at 1 kHz), phantom powering 12 V - 48 V,
supply current 2.2 mA, dimensions in mm: ? 22 x 118, resultant length 52 mm,
weight approx. 30 g.

Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Delivery Includes
1 K6P powering module
1 MZQ 200 microphone clamp
1 protective carrying case

Technical Data
Nominal impedance  200 Ohm, symm. 
Min. terminating impedance  1000 Ohm 
Output voltage  2 V (1 kHz) 
Power supply  Phantom 12 - 48 V 
Current consumption  2,2 mA 
Dimensions  d 22 x 52 mm (netto) 
Gain  0 dB 

12V AC-adapter for PS 4000, ASU 4000, HUB 4000, HPA 4000, CU4000 or SR 4000

Features

  • Connects directly to network via Ethernet cable—no soldering or additional cable required
  • Integrated user switch controls talk/mute in Local mode and triggers Dante-enabled devices in Remote mode
  • Local or remote control of gain, low-cut UniSteep® filter, red/green LED status indicator and phantom power
  • Powered by network PoE
  • Scalable across Danteʼs 512 bidirectional audio channels
  • Touch-sensitive capacitive-type user switch
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • 3-pin XLRF-type input for quick mounting of any gooseneck microphone with an XLRM-type output
  • Heavy die-cast case and non-slip silicone foam bottom padsminimize coupling of surface vibration to the microphone

 

Description

The ATND8677 is a Dante-enabled microphone desk stand for use with any gooseneck microphone with a three-pin XLRM-type output connector. The desk stand is designed for surface-mount applications such as high-quality sound reinforcement, conferencing, distance learning and other demanding sound pickup applications.

The desk stand features a touch-sensitive capacitive-type user switch with integral red/green LED status indicator. In Local mode the user switch mutes and unmutes the microphone. It can be set to toggle between live and muted audio (toggle on/off), to permit live audio only while the switch is pressed (press to talk), or to mute the audio while the switch is pressed (press to mute). In Remote mode the user switch can be used to trigger functions on compatible Dante-enabled devices, such as a video cameraʼs pan/tilt or a roomʼs lighting preset. While in Remote mode the desk standʼs audio output is controlled remotely. An integral 80 Hz low-cut UniSteep® filter provides easy switching from a flat frequency response to a low-end roll-off. The roll-off position reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically coupled vibrations. A three-position input gain level selector permits trim adjustment to accommodate louder and softer voices. The desk stand provides 12V DC phantom power by default, which can be switched off and on.

The gain, low-cut UniSteep® filter, red/green LED status indicator and phantom power can all be controlled locally or remotely via third-party software.* Recessed buttons on the bottom of the desk stand allow user to configure the desk stand settings locally. Audio, low-cut, gain and phantom power settings can be locked in Local mode by pressing and holding the lock button. This lock will prevent end users from adjusting the settings. Default settings for the stand are as follows: audio toggle on/off (with audio muted at power up), low-cut filter off, +30 dB input gain, phantom power on.

 

 

  • Frequency response: 20-20,000 Hz
  • Low frequency roll-off: 80 Hz, 18 dB/octave
  • Input impedance: 1.4 kO
  • Maximum input levels: -10 dBu @ +30 dB gain / -20 dBu @ +40 dB gain / -30 dBu @ +50 dB gain
  • Signal-to-noise ratio1: 68 dB, 1 kHz at 1 Pa
  • Power requirements: PoE IEEE802.3af standard
  • Power consumption: 1.5W
  • Microphone phantom power: 12V DC
  • Switches: Local Mode: Touch-sensitive capacitivetype user switch function: toggle (mute on power up), toggle (talk on power up), momentary on, momentary off; Low-cut filter: flat, roll-off; Gain: +30 dB, +40 dB, +50 dB; Phantom power: 12V DC, off Remote Mode: Low-cut and Gain via third-party software*
  • Weight: 770 g (27.2 oz)
  • Dimensions: 133.0 mm (5.24“) maximum length, 93.8 mm (3.69“) maximum width, 46.2 mm (1.82“) maximum height
  • Input connector: 3-pin XLRF-type
  • Output connector: Physical level: standard Ethernet
  • Dante network:Connector: single RJ45 | Cable quality: Shielded CAT5 or CAT6 recommended | Transmission speed: 100 Mbps

 

The Gravity MA 3D A lets you attach microphones, action cams and mobile phone holders to your microphone stand, and set them up flexibly. Its fastening mechanism is quick and easy to assemble. The large clamping range from 15 to 35 mm and the three joints' 360° rotation options allow you to install it as you like. Simply loosen, adjust and tighten the wing-screws.  
Material: Plastic , Polyamide Joint adjustment: Wing screw Joint rotation: 360° Joint tilt: 180° Arm length: 400 mm Suitable for mounting on: Microphone Stands Suitable for tube diameter: 15 mm - 35 mm Colour: Black Thread size: 3/8” Weight: 0,302 kg
 
Weight1.00 kg0.8 kg0.50 kg0.50 kg0.20 kg0.302 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 0.8 kg
Weight 0.50 kg
Weight 0.50 kg
Weight 0.20 kg
Weight 0.302 kg