IES Supervisor 24 Lighting Desk-2nd Hand-
Going through all of the functions will confirm that this has been the right choice,
and will be for at least the next ten years.
The flexible setup from the input device and internal network communication, as well as the enormous
memory capacity does not enforce any hardware limitations therefore only the system software has to be
upgraded by means of the monitor software to provide you with additional functions.
The supervisor was designed together with experienced TV / theater and rental users.
Each party contributed with their own specific problems and experience to the present functions.
Combining all this was the base for the way the Supervisor works,
Simply define your wishes in the set-up menu and it will be arranged.
In the future new ideas and functional improvements will be made and can easily be
implemented in your desk as well.
The SUPERVISOR is equipped with three serial outputs. An RS-485 port for bi-directional communication with
dimmers and other DMX-512 controllable devices and a RS-232 port to enable communication with an
overhead system such as a personal computer.
The RS-485 output is prepared to handle more advanced protocols and speeds then DMX-512 without any
problems.
The reason that the SUPERVISOR uses DMX-512 is that this is the only lighting protocol, which is worldwide
adapted and accepted.
The real limitations using DMX-512 are found using indeed 512 channels and high resolutions for scanners
as well as the absence of a checksum which makes it in fact a blind protocol.
But don’t worry, for the moment it is a very big improvement against all the critical and complex wiring from
conventional analog systems, and when the time is ready for a new standard the SUPERVISOR is prepared.
The MIDI in and output opens the possibilities for master/slave use and easy synchronization between
different devices.
SUPERVISOR-24 SUPERVISOR-48 SUPERVISOR-72
Signal input ……………………….. DMX-512 USITT optical isolated RS485 / 250 kbaud
MIDI output …………………………. with selectable channel and key address
MIDI input …………………………… with selectable channel / flash button / function start address
Master/slave ……………………….. by means of MIDI out Æ in
Channels (wide mode) …………. 24 48 72
Soft patch channels ……………… 96 / 256 / 512 96 / 256 / 512 96 / 256 / 512
Data exchange (bi-directional).. RS232 9600b optical isolated (X-on / X-off)
Power supply ……………………… 150-250V AC 150-250V AC 150-250V AC
Frequency…………………………… 50-60 Hz 50-60 Hz 50-60 Hz
Power consumption ……………… 14 VA max. 14 VA max. 14 VA max.
Top-set ………………………………. 30-100% 30-100% 30-100%
Bottom-set ………………………….. 0-30% 0-30% 0-30%
Pages ………………………………… 40 30 20
Cueʼs …………………………………. 6420 4680 2700
Chasers / sequences……………. 60 40 20
Steps per chaser …………………. 99 99 99
Output curves ……………………… linear / square linear / square linear / square
User memory ………………………. 1,0MB 1,0MB 1,0MB
System memory…………………… 512kb 512kb 512kb
Display ………………………………. L.C.D. super twisted led backlight BATRON
Audio input………………………….. 0,775V – 50V auto ranging and optical isolated
Fader module processor……….. 78HC11 8Mhz / board
Main processor ……………………. 78HC11 8Mhz
Password……………………………. one technical and one user password (4 digits)
Manual mode………………………. 2 or 1 preset (wide) mode
Output device (per 6ch) ………… selectable for scanner or real (proportional) level
Flash function (per 6ch) ………… add-solo-channel
Serial protocol……………………… n.c. / Monitor / P.C. edit program
Master B…………………………….. normal / inverse
GO button…………………………… by means of the sound input or “step up” button
X-fade ……………………………….. by means of the B.P.M. fader ( press the B.P.M button for 5 sec.)
Step time ……………………………. 0-99,9 sec
Pause time………………………….. 0-99,9 sec
Size (wxhxd) ……………………….. 482,5 x 266 x 95 mm 708 x 308 x 95 mm 958 x 308 x 95 mm
Weight ………………………………. 4,6 Kg 5,4 Kg 7,3Kg
Order code………………………….. 9801 S 9802 S 9803 S
Metal built-in console……………. included included included
Monitor/up-down load software included included included
Desktop console………………….. 9801 W 9802 W 9803 W
Reviews
There are no reviews yet.