| Content |
User\'s manual
DSP parameter
The LD Premium V215B is a DUAL 15" 1200 W RMS / 131 dB max. SPL bass-reflex subwoofer.
Engineered with CATAR Technology (Clear Audio Time Aligned Responds) it provides outstanding sound reproduction. Offering plenty of tight, punchy bass, the V215B matches up perfectly with the VA4 or VA8 to provide excellent full-range response with high SPL and clear sound. The uniquely-designed cabinets are all made of multiplex ply, with DuraCoat LX coating, helping them stand up to the tough daily demands of touring and live applications.
Product type
PA subwoofer
Type
Passive
Low/mid driver dimensions
2 x 15 "
Woofer size
2 x 381 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
4 "
Woofer voice coil (mm)
101.6 mm
Load rating (RMS)
1200 W
Frequency response
35 - 200 Hz
SPL (1W/1m)
100 dB
Max. SPL
131 dB
Impedance
4 Ohm(s)
Loudspeaker inputs
1
Speaker input connections
Speakon
Loudspeaker outputs
1
Speaker output connections
Speakon
Cabinet material
18 mm Birch Plywood
Cabinet surface
Dura Coat LX Texture Paint
Cabinet construction
vented
Width
1060 mm
Height
475 mm
Depth
620 mm
Weight
80 kg
Features
ergonomically shaped insert handles , Prepared for mounting of casters , Ready for VA4 ground stacking
|
TOA HX-5 Array system
Variable Dispersion Speaker System.
Four speaker modules ensure high power and high quality.
The changeable orientation of each of the four speaker modules independently
allows the directivity angle of the speaker system to be adjusted.
Built-in passive network ensures appropriate sound quality.
deal for both permanent and temporary installations, including both vertical and horizontal positioning.
Equipped with a convenient carrying handle.
Can be mounted directly on a wall or suspended by wire, chain or shackle with no need to use optional brackets.
Optional mounting brackets allow use in a wide variety of applications, including suspension, ceiling mounting,
wall mounting, and speaker stand mounting. Mounting procedures are described in the instruction manuals enclosed
with the mounting bracket or stand adapter.
HX-5B
Enclosure Type Bass Reflex
Power Handling Continuous Pink Noise; 200W: Continuous Program; 600W
Rated Impedance 8ohms
Sensitivity (1 W, 1m) 96 dB (60° mode), 97 dB (45° mode), 98 dB (30° mode), 99 dB (15° mode)
Frequency Response(Deviation -10dB) 70 to 20,000 Hz (60° mode) 75 to 20,000 Hz (45° mode)
80 to 20,000 Hz (30° mode) 85 to 20,000 Hz (15° mode)
Crossover Frequency 4kHz
Directivity Angle Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz), 45° (over 1 .2 kHz),
30° (over 1 .6 kHz), 15° (over 3.2 kHz) variable
Speaker Component Low frequency: 12 cm (5“) cone-type x 4 High frequency: Balanced dome-type x 12
Input Terminal Speakon NL4MP x 2 and M4 screw terminal
Finish (Enclosure) Polypropylene, black
Dimensions 408 (w) x 546 (h) x 342 (d) mm 16 1/16 (w) x 21 1/2 (h) x 13 15/32 (d) inches
Weight 16kg
Accesory Hanging bracket x 2, Hex. wrench x 1
Options Matching transformer:MT-200,Speaker mounting bracket:HY-PFB,HY-CW1B,HY-WM1B,
HY-WM2B,HY-CN1B, Speaker stand adapter:HY-ST1
|
The SR-S4L is a two-way line array speaker ideal for long distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | | Sensitivity | 94 dB (1 W, 1 m) | | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | | Crossover Frequency | 3,500 Hz | | Directivity Angle | Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height) | | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | | Finish | Enclosure: MDF, white, paint
Front grille: Punched steel plate, white, acrylic paint | | Dimensions | 160 (W) × 895 (H) × 255 (D) mm | | Weight | 16 kg | | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4,
Flying bracket: SR-FB4, Wall mounting bracket: SR-WB4,
Wall tilt bracket: SR-TB4, Stand adapter: SR-SA4,
Protection pad: SR-PP4, Floor stand: SR-FS4,
Digital processor: DP-0206 |
|
The SR-C8SWP is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode) | | Rated Impedance | 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode) | | Sensitivity | 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode) | | Frequency Response | 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters) | | Crossover Frequency | 1,600 Hz (when driven with the optional DP-0206's recommended parameters) | | Directivity Angle | Horizontal: 110゜, Vertical: 15゜ | | Speaker Component | Low frequency: 20 cm (8) cone-type“
High frequency: Wave front control horn 110゜ (horizontal) × 15゜ (vertical)
+ compression driver × 2 | | Connected Cable | Direct cable withdrawal from internal speaker: φ8.6 mm (φ0.34)
,conductor cross section: 1.25 m㎡ (0.05“)
4-core cable, 3 m (9.84 ft) | | Water Protection | IPX4 | | Finish | Enclosure: Plywood, black, urethane coating
Front grille: Punched stainless steel, black, paint | | Dimensions | 526.6 (W) × 293 (H) × 294 (D) mm (20.73 × 11.54" × 11.57“)“ | | Weight | 16 kg (35.27 lb) | | Accessory | M8 connection bolt …4 | | Option | Rigging frame: SR-RF8WP
Digital processor: DP-0206 |
|
A very compact, active, two-way line array loudspeaker module that delivers extraordinary power handling, clarity, flexibility and great sound in a compact, easy to handle and affordable package.
The 750 Watt Class-D Digipro amplifier module accurately matches the high quality analogue signal input board with precise, complex filter response that result in the natural, detailed reproduction of the best radiating designs.
The NX L23-A is the ideal choice when line array performance is needed and a fast and easy set up is a must.
| Features |
|---|
| 750 Watt Digipro digital amplifier | | 133 dB max spl | | 100 x 15, Wide dispersion constant directivity angle | | 12" woofer, high power neodymium 3.5" voice coil | | 3 x 1" HF driver, titanium dome, neodymium 1.75" voice coil | | PFC power factor correction |
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 60 Hz | ÷ 20 kHz | | Max SPL: | 133 dB | | | Horizontal coverage angle: | 100° | | | Vertical coverage angle: | Max 15° | | | Compression Driver: | 3 x 1" neo, 1.75" v.c. | | | Woofer: | 12" neo, 3.5" v.c. | |
| INPUT/OUTPUT SECTION |
|---|
| Input signal: | bal / unbal | | | Input connectors: | Combo xlr-jack | | | Output connectors: | xlr | | | Input sensitivity: | -2 dBu / +4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 1300 Hz | | | Protections: | Thermal, rms | | | Limiter: | Soft peak limiter | | | Controls: | Volume, hf correction cluster size | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 750 Watts | | | High frequencies: | 250 Watts | | | Low frequencies: | 500 Watts | | | Cooling: | Convection / foced | | | Connections: | Powercon in / out | |
| CABINET |
|---|
| Cabinet Material: | Balitc birch | | | Hardware: | Arry side fittings | | | Handles: | 2 side | | | Pole Mount/Cap: | Yes | | | Colour: | Black | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 346 / 13.62 mm/inch | | | Width: | 659 / 25.94 mm/inch | | | Depth: | 415 / 16.33 mm/inch | | | Net Weight: | 28.5 / 62.83 Kg/Lbs |
|
The VRX932LAP is a powered, lightweight, compact 12" two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital.
| Features : | | Specifications : |
- Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
| - JBL's exclusive neodymium magned Differential Drive® woofer for high-power capacity and light-weight.
| - VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
| - Constant Curvature waveguide for unprecedented array coherence.
| - Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility.
| - Array Configuration Selector permist "array shading“.
| | |
| Power Rating | : | 1750 Watts Peak
875 Watts Continuous |
| | Frequency Range | : | 57 Hz - 20 kHz
(-10 dB) |
| Dimensions
(H x W x D) | : | 349 mm x 597 mm x 444 mm
(13.75 in x 23.5 in x 17.5 in) |
| | Frequency Response | : | 75 Hz - 20 Hz
(+/-3db) |
| | Maximum Peak Output | : | 136 dB SPL at 1m |
| | Coverage Pattern | : | 100 x 15 nominal |
| | DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance) | : | LF: 750 Watts, HF: 125 Watts |
| | DPC-2 Output Sectoin | : | LF: Dual-Bridged Technology™, Class D |
| | Autio Input Connector | : | XLR with loop through |
| | LF Driver | : | 1 x JBL 2262FF 305 mm (12 in) neodymium magnet |
| | HF Driver | : | 3 x JBL 2408J, 38 mm (1.5 in) |
| | User Controls | : | Input Attenuator (0-16 dB) |
| | Signal Processings | : | DSP based, resident in Input Module |
| | AC Power Operating Range | : | 90-132 VAC or 216-264 VAC, 50/60 Hz |
| | AC Input Connector | : | Neutrik PowerCon (NAC 3MPA) |
| | AC Loop Through Connector | : | Neutrik PowerCon (NAC 3MPB) |
| | AC Current Requirements | : | 6A per system at 120V, 3A per system at 240V |
| | Enclosure | : | 25/15 mm, 11-ply birch plywood |
| | Suspension / Mounting | : | Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting |
| | Finish | : | Black DuraFlex™ finish |
| | Grille | : | Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam |
| | Net Weight | : | 24 kg (52 lb) |
| | Optional Accessories | : | VRX-AF: Suspension array frame | | |
|
Reviews
There are no reviews yet.