Content | LD Systems ICOA 12 A 12" Active Coaxial PA Speaker
This full-range loudspeaker impresses with its outstanding sound, even at low frequencies. The ICOA 12 A by LD Systems is a genuine all-rounder that offers unparalleled features for its class. Its coaxial design, rotating, BEM-optimised CD horn and extensive and precisely calibrated DynX DSP presets make this aktive 12" loudspeaker exceptionally flexible.
The outstanding bass reproduction from the horn-loaded woofer makes the LD ICOA 12 A the ideal choice for musicians, bands, entertainers and dance schools. It also allows DJs to play sets without the need for a subwoofer. Deployed vertically, the speaker impresses as a satellite; horizontally, it's excellent in suspended systems or as a floor monitor. The efficient class-D power amplifier delivers 126 dB max. SPL and 300 W RMS performance.
Drawing on DynX DSP technology by LD Systems, the speaker delivers perfect performance with maximum clarity and power under all conditions. 4 presets, a 3-band EQ and a delay function facilitate optimal adjustment of the sound to the venue conditions. The 2 line/mic input channels with individual gain controllers, plus mono mix output, allow a variety of signal sources to be connected.
Thanks to its shock-resistant front grille and ideal 55° tilt angle, the LD ICOA 12 A is also outstanding as a floor monitor. Placed vertically, the 36 mm dual tilt stand attachment offers the choice of a 0° or 5° tilt angle for optimally adapting the system to the local acoustic environment.
Extensive and smart accessories for installation and transport are optionally available. 4 aluminium handles with an ergonomic rubber surface provide optimal grip when carrying the speaker.
Product type |
PA loudspeaker |
Type |
Powered |
Low/mid driver dimensions |
12 " |
Woofer size |
304.8 mm |
Woofer magnet |
Ferrite |
Woofer brand |
Custom-made |
Horn |
BEM optimized CD Horn |
HF driver dimensions |
1 " |
HF driver size |
25.4 mm |
HF driver magnet |
Ferrite |
HF driver brand |
Custom-made |
HF driver voice coil |
1.4 " |
HF driver voice coil |
35 mm |
Amplifier |
Class D |
Dispersion (H x V) |
90° x 50° |
RMS |
300 W |
Peak power |
1200 W |
Frequency response |
50 - 20000 Hz |
Crossover frequency kHz |
2 kHz |
Max. SPL (peak) |
126 dB |
Protection circuits |
Multiband limiter, over voltage, over-current, thermal overload |
Controls |
2 x gain, On / off switch, Rotary/push encoder |
Indicators |
LC display |
Mic/ line inputs |
2 |
Mic-/ Line Input Connectors |
6.3 mm jack Combination sockets (symmetrical), XLR |
Line inputs |
1 |
Line input connectors |
3.5 mm TRS |
Line outputs |
1 |
Line output connectors |
XLR |
Operating voltage |
SMPS |
Power consumption |
150 W |
Ambient temperature (in operation) |
0 - 40 °C |
Operating voltage |
100 V - 240 V AC / 50 - 60 Hz |
Relative Humidity |
< 80 %, not condensing |
Fuse |
T4AL 250 V |
Cabinet material |
Polypropylene |
Cabinet construction |
Bass Reflex |
Mounting |
36mm flange (0°, 5°), 6 x M10 flying points |
Monitor angle |
55 ° |
Width |
375 mm |
Height |
635 mm |
Depth |
396 mm |
Weight |
19,95 kg |
Accessories (included) |
Power cord |
|
A versatile 12" powered speaker made from heavy duty polypropylene housing with a high power 12" woofer and 1.35" compression driver. Suitable for mobile DJ's, hire companies, installations, aerobics classes and as a monitor for solo singers and bands. A robust, well designed cabinet with a good punch and crystal clear high frequency response. Simple controls have been used on the rear, balanced mic input on XLR OR JACK, a balanced line input on XLR or unbalanced on RCA & a link output to similar or active subwoofers. A strong lifting handle to help mount onto a 35mm speaker pole and the option of a padded bag for extra protection that can be purchased separately.
SPECIFICATION
Power: 200 Watts RMS
Response: 45-20000Hz
Dimensions: 588 x 431 x 310mm
Weight: 17Kg
|
Features
400 Watt digital bi-amplification
127 dB max spl
Wide dispersion 90 x 60 constant directivity horn
12" High power woofer, 2.5" voice coil
1" Mylar dome, high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 50 Hz ÷ 20 kHz
Max SPL: 127 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1" 1.4" voice coil
Woofer: 12" 2.5" voice coil
Input/Output Section
Input signal: bal/unbal
Input connectors: xlr-jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1800 Hz
Limiter: Fast limiter, RMS limiter
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Cabinet
Cabinet Material: Composite PP
Hardware: 2 x M10 flying points
Handles: 1 on top, 2 on sides
Pole Mount/Cap: yes
Grille: steel
Colour: Anthracite grey
Physical Specifications
Height: 637/25 mm/inch
Width: 384/15.11 mm/inch
Depth: 363/14.2 mm/inch
Net Weight: 17.2/37.91 kg/lbs
|
Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 15-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount
Specifications:
Frequency Response (+/-3 dB): 60 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 45 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 135 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2265FF, 381 mm (15 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 13 M10 Fittings, 35 mm pole mount socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 613 x 434 x 359 mm
24.1 x 17.1 x 14.1 in
Net Weight: 24.7 kg (55 lb)
| Product Features:
- High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
- Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
- High-performance MP3 player included to play audio files via USB stick
- “Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
- 2-channel mixer with individual Mic/Line inputs (XLR and 1/4" TRS), Volume controls and Clip LEDs
- Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
- Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
- Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power
- state-of-the-art 1" phenolic-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential horn
- Additional Line output allows linking of additional speaker systems
- Versatile trapezoidal enclosure design allows different positioning:
- - Stand mounting with 35-mm pole socket
- - Tilts on its side for use as a floor monitor
- Ergonomically shaped handles for easy carrying and setup
- High-quality components and exceptionally rugged construction ensure long life
User's Manual |
The DBR12 represents a perfect balance of size and performance, with 1000W of power and outstanding resolution at any output level. Ideal for front-of-house, floor monitoring applications or even the stage side fills, the DBR12 is an ideal choice for a wide range of applications. |
Reviews
There are no reviews yet.