| Content | LD Systems ICOA 12 A 12" Active Coaxial PA Speaker
This full-range loudspeaker impresses with its outstanding sound, even at low frequencies. The ICOA 12 A by LD Systems is a genuine all-rounder that offers unparalleled features for its class. Its coaxial design, rotating, BEM-optimised CD horn and extensive and precisely calibrated DynX DSP presets make this aktive 12" loudspeaker exceptionally flexible.
The outstanding bass reproduction from the horn-loaded woofer makes the LD ICOA 12 A the ideal choice for musicians, bands, entertainers and dance schools. It also allows DJs to play sets without the need for a subwoofer. Deployed vertically, the speaker impresses as a satellite; horizontally, it's excellent in suspended systems or as a floor monitor. The efficient class-D power amplifier delivers 126 dB max. SPL and 300 W RMS performance.
Drawing on DynX DSP technology by LD Systems, the speaker delivers perfect performance with maximum clarity and power under all conditions. 4 presets, a 3-band EQ and a delay function facilitate optimal adjustment of the sound to the venue conditions. The 2 line/mic input channels with individual gain controllers, plus mono mix output, allow a variety of signal sources to be connected.
Thanks to its shock-resistant front grille and ideal 55° tilt angle, the LD ICOA 12 A is also outstanding as a floor monitor. Placed vertically, the 36 mm dual tilt stand attachment offers the choice of a 0° or 5° tilt angle for optimally adapting the system to the local acoustic environment.
Extensive and smart accessories for installation and transport are optionally available. 4 aluminium handles with an ergonomic rubber surface provide optimal grip when carrying the speaker.
| Product type |
PA loudspeaker |
| Type |
Powered |
| Low/mid driver dimensions |
12 " |
| Woofer size |
304.8 mm |
| Woofer magnet |
Ferrite |
| Woofer brand |
Custom-made |
| Horn |
BEM optimized CD Horn |
| HF driver dimensions |
1 " |
| HF driver size |
25.4 mm |
| HF driver magnet |
Ferrite |
| HF driver brand |
Custom-made |
| HF driver voice coil |
1.4 " |
| HF driver voice coil |
35 mm |
| Amplifier |
Class D |
| Dispersion (H x V) |
90° x 50° |
| RMS |
300 W |
| Peak power |
1200 W |
| Frequency response |
50 - 20000 Hz |
| Crossover frequency kHz |
2 kHz |
| Max. SPL (peak) |
126 dB |
| Protection circuits |
Multiband limiter, over voltage, over-current, thermal overload |
| Controls |
2 x gain, On / off switch, Rotary/push encoder |
| Indicators |
LC display |
| Mic/ line inputs |
2 |
| Mic-/ Line Input Connectors |
6.3 mm jack Combination sockets (symmetrical), XLR |
| Line inputs |
1 |
| Line input connectors |
3.5 mm TRS |
| Line outputs |
1 |
| Line output connectors |
XLR |
| Operating voltage |
SMPS |
| Power consumption |
150 W |
| Ambient temperature (in operation) |
0 - 40 °C |
| Operating voltage |
100 V - 240 V AC / 50 - 60 Hz |
| Relative Humidity |
< 80 %, not condensing |
| Fuse |
T4AL 250 V |
| Cabinet material |
Polypropylene |
| Cabinet construction |
Bass Reflex |
| Mounting |
36mm flange (0°, 5°), 6 x M10 flying points |
| Monitor angle |
55 ° |
| Width |
375 mm |
| Height |
635 mm |
| Depth |
396 mm |
| Weight |
19,95 kg |
| Accessories (included) |
Power cord |
| Features
- Best in class audio performance
- 2000 Watt Class-D amplifier module
- Intrinsic Correction™ tuning and loudspeaker management
- DMT™ (Directivity Matched Transition) design provides excellent power response and consistent performance across the listening are
- Refined, professional appearance looks great in any application
- Rugged ABS enclosure for long life and lasting durability
- Deployment in either main PA or floor monitor position
- Factory Presets and savable/recallable Scenes for commonly-used application
- Multi-function digital display for control and selection of loudspeaker functions including cross-over, EQ, delay and frequency contour
- Dual pole cup mounts (standard and 7.5 degree down-tilt)
- M10 fittings for flown applications
- Optional security panel prevents unauthorized tampering of controls
- Complete EASE and CAD information available online
- 6-Year Warranty (with product registration)
|
The full range 12" two-way, SRX812P features legendary JBL Drivers, proprietary 2,000 Watt Crown amplification, Crown Front-End DriveCore Technology, premium JBL user-configurable DSP, V5 Tunings compatible with Vertec and VTX touring systems, and HiQnet Network control options via iOS and Android applications. Drawing on JBLʼs long history of groundbreaking technology and loudspeaker design, the SRX800 Series meets the needs of touring houses, installations, and the most demanding live sound applications ensuring they can deploy a no-compromise, all-in-one solution featuring legendary JBL sound and performance, a wide array of configurability, and compatibility with JBLʼs flagship touring systems. |
Dimensions (H x W x D) 620 x 394 x 330 mm (24.4 x 15.5 x 13“)
Net Weight 20.5 kg (45.1 lbs)
Components 1 x 12" (305 mm) LF driver, 1 x 1" (25 mm) HF compression driver
Frequency Response 50 Hz - 18 kHz ±3 dB
Dispersion 90° H x 60° V @ -6 dB points
Calculated Max SPL 128 dB peak
Construction Injection-moulded polypropylene enclosure. Recessed carrying handles. Integral dual-angle pole mount socket
Grille Powder coated galvanised perforated steel mesh with foam backing
Connectors
Mic/Line input: combo jack/female XLR wired pin 2 hot
Mix out: male XLR wired pin 2 hot
IEC mains connector with integrated fuseholder with integrated fuseholder
Rigging (6) M10 threaded internal rigging points
Spares & Accessories LS-1229 12" (305 mm) Replacement LF loudspeaker
RC-1229 Recone kit
CD-125 1" (25 mm) HF compression driver
RD-125 HF diaphragm
MG-M12 Metal grille
PB-55 Wall bracket, pole mount fixing
EB-10 Shoulder eyebolt
|
With a 12" woofer and a 1" titanium compressor driver, the EKX-12P from Electro-Voice is a powered two-way Loudspeaker providing 1500W of Class D amplification. It\'s suitable in live-music scenarios, lecture setups, and generalized nightclub use. The loudspeaker\'s integrated QuickSmartDSP technology can be modified using the LCD-based menu-navigation screen and the single-knob user interface. Four presets of DSP are provided for various settings—Music, Live, Speech, and Club—though EQ manipulation and five user-programmable presets are all adjustable. Visual monitoring of your limiter, input metering, and master volume allow you to gain-stage properly.
Its on-board amplifier can deliver up to 132 dB of SPL, its frequency response ranges from 50 Hz to 20 kHz at -10 dB, and its intelligent thermal-management system controls fan-speed by means of multiple built-in sensors, thus reinforcing the durable performance of this speaker (whose 15mm wooden enclosure is fronted by an 18 AWG steel grille). Electro-Voice\'s SST waveguide design provides measured and dependable coverage of a given area, and the speaker\'s Cardioid Control Technology allows you to steer output towards the audience while reducing levels up to 35 dB on stage when multiple subwoofers are employed.
For convenience in mounting and transport, this loudspeaker boasts eight M10 threaded mounting points, aluminum pole mounts, and metallic handles; as such, it can be mounted on a tripod stand, on a pole above your subwoofer, or utilized as a floor monitor for artists on stage. You can feed the speaker sweet, sweet audio via RCA inputs or XLR/1/4" combination jacks, and you can link it to other monitors via an XLR link-output.
| Connectors |
1 x stereo RCA input
2 x XLR/TRS combo jack
1 x XLR, link output |
| Coverage |
Nominal: -6 dB
Horizontal: 90°
Vertical: 60° |
| Crossover Frequency |
1.7 kHz |
| Enclosure Material |
15 mm Plywood with EVCoat |
| Frequency Response |
-10 dB: 50 Hz - 20 kHz
-3 dB: 60 Hz - 18 kHz |
| Grille |
18 AWG steel with powdercoat |
| Transducer |
HF: DH-1M 1" titanium compression driver
LF: EVS-12M 12" (300 mm) |
| Maximum SPL |
132 dB
132 dB maximum SPL is measured at 3.3\' / 1 m using broadband pink noise at maximum output |
| Power Consumption |
1.8 A
Current rating is 1/8 power |
| Power Rating |
1500 W |
| Suspension |
8 x M10 threaded mounting points |
| Dimensions |
23.9 x 14.76 x 14.02" / 60.7 x 37.5 x 35.6 cm |
| Weight |
41.45 lb / 18.8 kg |
|
Features
- Compact multi-purpose system with monitor position
– Ultra lightweight 3rd generation Class D amplifier
– Switch-mode power supply
– Reduced size and weight
– Pole mount socket
– Rigging points
The Avant series incorporates an impressive battery of high tech features that take powered portable systems to a new level of performance. The latest in Class D power amplification, digital signal processing and optimized D.A.S. components have been combined with enclosures designed for ease of transportation and road worthiness.
The Avant 12A offers a multi-angle enclosure which allows it to be used in stage monitor applications as well as a compact P.A. system.
The 600 W Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the Avant series one of the best sounding systems on the market. After all, isn´t quality sound what it´s all about?
The 12AV4 loudspeaker designed and built by D.A.S. provides accurate low frequency reproduction. High frequencies are handled by the M-50N compression driver which uses a neodymium magnet structure and 2" titanium diaphragm-features hard to find on other systems in this market segment.
Technical Data
| Nominal LF Amplifier Power | 500 W | | Nominal HF Amplifier Power | 100 W | | Frequency Range (-10 dB) | 60 Hz-20 kHz (EQ Main) | | Rated Peak SPL at 1 m | 133 dB | | Dispersion | 80ºH x 50ºV rotatable horn | | Enclosure Material | Plywood | | Color/Finish | Black/Paint | | Connectors | Input: Female XLR-Jack combo
Loop Thru: XLR
AC Input Male IEC | | AC Requirements | 115 V, 50/60 Hz
230 V, 50/60 Hz | | Current Draw (1/3 power @ 230 V) | 1.7 A | | Dimensions (H x W x D) | 71.3 x 36.2 x 39.7 cm
28 x 14.3 x 15.6 in | | Weight | 22 kg (48 lb) |
|
Reviews
There are no reviews yet.