| Content |
- 2-way passive 8” bass reflex PA speaker
- 400 watts RMS power handling
- 125 dB maximum SPL
- 12" custom woofer and BMS compression driver
- BEM optimized HF waveguide for uniform coverage
- Birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
- Shock-resistant front grill provides maximum speaker protection
- 36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
- Large selection of smart installation and transport accessories
STINGER 12 G3
Engineered for rock-solid reliability day in, day out this passive 2-way loudspeaker is a truly professional performer. With its multi-purpose bass reflex construction it is equally suitable for fullrange, satellite or floor monitor use in live PA systems and permanent installations. The Stinger® 12 G3 boasts a mighty 400 watts RMS power handling and 125 dB maximum sound pressure. It is loaded with a custom designed 12” woofer and BMS compression driver delivering extended low frequency response and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 12 G3 is designed to be a real workhorse throughout. The enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 12 G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type PA loudspeaker
Type passive
Low/mid driver dimensions 12 "
Woofer Size 304.8 mm
Woofer magnet Ferrite
Woofer brand Custom-made
Woofer voice coil 2.5 "
Woofer voice coil (mm) 63.5 mm
Horn CD horn
HF driver dimensions 1 "
HF Driver Size 25.4 mm
HF driver magnet Ferrite
HF driver brand BMS
HF driver voice coil 1 "
HF Driver Voice Coil 25.4 mm
Dispersion (H x V) 90 ° x 50 °
Load rating (RMS) 400 W
Peak power 800 W
Frequency response 58 - 20000 Hz
SPL (1W/1m) 99 dB
Max. SPL 125 dB
Impedance 8 Ohm(s)
Protection circuits HF Driver
Loudspeaker inputs 1
Speaker input connections Speakon compatible
Loudspeaker outputs 1
Speaker output connections Speakon compatible
Cabinet material 15 mm Plywood
Cabinet surface Polyurea
Cabinet construction vented
Monitor angle 54 °
Width 390 mm
Height 627 mm
Depth 377 mm
Weight 17,7 kg |
The MI-112 is a 2-way passive full range loudspeaker that utilizes a 12? cone
low frequency transducer and a 1? throat compression driver with titanium
diaphragm. The multi-angle cabinet is constructed of Complex Aggregate Board
and finished with a hard-wearing black carpet. Two bar handles and a steel grille
sealed against corrosion using a polyamide powder coat finish are provided. A 35
mm tripod socket allows for stand mounting.
APPLICATIONS:
Intended for use in portable sound reinforcement and P.A.
FEATURES:
2-way vented loudspeaker system
1 x 12" speaker
1" compression driver with constant directivity horn
225 W power handling
Highly resistant CAB enclosure
SPECIFICATIONS:
RMS (Average) Power HandlingR: 225 W
Program Power HandlingP: 450 W
Peak Power HandlingK: 900 W
On-axis Frequency RangeF: 60 Hz - 16 kHz
Nominal Impedance: 8 Ω
On-axis Sensitivity 1W / 1 mS: 98 dB SPL
Rated Peak SPL at Full Power:128 dB
Nominal -6 dB BeamwidthsB: 90° Horizontal
(average, 500 Hz to 8 kHz) 75° Vertical
Speech Coverage AnglesC: 90° Horizontal x 80° Vertical
Enclosure Material:Complex Aggregate Board
Finish:Blue Gray carpet
Connector: 2 paralleled NL4 Speakon, wired
Dimensions (H x W x D): 59 x 43 x 35 cm / 26.5 x 19 x 15.4 in
Weight: 20.3 kg/ 45 lbs
Shipping Weight: 23.5 kg/ 52 lbs |
Electro-Voice ZX3-60B - 600-Watt, 12” two-way loudspeaker system, bi-amp or passive, 60 X 60 horn, integral stand mount, Neutrik Speakon, Black
This item is BLACK.
The Electro-Voice ZX3-60B is a 2-way P.A. passive loudspeaker with a 600-watt continuous power handling capacity and a 60x60° coverage angle, for long-throw and cluster applications. The high-tech, high-impact polypropylene enclosure houses a 12" woofer and a 1" Neodymium compression driver with a large 2" voice-coil.
The ZX3-60B cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker.
• 2-way 600-watt suspension P.A. speaker with 60x60° coverage for long-throw and cluster applications
• High output, 131dB SPL capacity
• Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor
• 12" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil
• Rugged, high-tech polypropylene enclosure
• 3 suspension Anchor Plates, 10 M8 insert suspension points Additional Information on the ZX3-60B
| Active or Passive |
Passive |
| Frequency Response |
-10dB:48-20,000Hz |
| Power Capacity |
600W |
| Maximum Sound Pressure Level (SPL) |
131dB |
| Nominal Sensitivity |
97dB |
| Impedance |
8 Ohms |
| Crossover |
2KHz |
| Low Frequency Driver |
DVX3121, 12" (305mm) Driver |
| High Frequency Driver |
ND2, 1" (25.4mm) exit Neodymium |
| Enclosure Material |
Polypropylene Structural Foam |
| Input Connections |
Neutrik Speakon NL4\'s x 2 |
| Mounting Options |
Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure |
| Dimensions |
24.14 x 15.64 x 14.26" (613 x 397 x 362mm) |
| Weight |
43.7 lbs (19.8 kg) |
| The Electro-Voice® ZX3 offers an unprecedented level of lightweight, 12-inch, two-way, loudspeaker performance for the widest variety of portable and installed applications. Featuring the new DVX3121 12-inch woofer and the ND2 neodymium compression driver, the ZX3 continues the groundbreaking innovation of the EV DVX woofer program, joining the ranks of EV\'s ZX series between the eight-inch ZX1 and the 15-inch ZX5.
When it comes to problem and solution versatility, the ZX3 is in a class of its own. In addition to the highest performance drivers available, a complete range of optional accessories, including the CB-5 array kit, MB3 wall and ceiling-mount bracket, HA-3 handle adapter for use with the VSA-1 strong arm mount, and TCA-1 truss clamp adapter allow the ZX3 to be easily and precisely configured in multiple box arrays, mounted on trusses or tripods, deployed as monitors, or used as system mains with a subwoofer.
Housed in a stylish yet rugged injection molded enclosure, the ZX3 shares the same functionality as the larger ZX5, with 90 degre x 50 degree or 60 degree x 60 degree horn dispersion patterns, 45 degree or 55 degree monitor angles, passive or biamp operation, and seven M8 rigging points. The ZX3 is available in a weatherized version and in either a black or white finish. An optional HDC-3 heavy-duty stackable cover is also available. |
With the newly designed D12W, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffle by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.
|
With the newly designed D12-3, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust high-performance professional 12" 3-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12-3 is also ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
Cabinet Full-Range Configuration Passive 3-Way Nominal impedance 8 Ohms Rated power RMS 350 Watts Program power 700 Watts Peak power 1400 Watts SPL 2,83 V / 1m 1W / 8 Ohm 100 dB Max. SPL 1m (calculated) 128 dB Frequency range ( -10dB ) Full range 70 Hz - 20kHz Coverage angle 1 kHz -6dB 120° Conical Coverage angle 10kHz -6dB 90° * 50° Passive crossover frequency 700Hz, 4kHz Voice coil tracking protection Yes Component HIGH Electro-Voice DH-3 Order No. 353 078 Component MID DYNACORD DND 6120 Neodymium Order No. 366 302 Component LOW Electro-Voice DL12BFH Order No. 358 288 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) mm 430 x 586 x 321 Shipping weight 20 kg Net weight 19 kg Enclosure material Heavy Duty Polypropylene Finish Black Grille Powder coated steel, Acoustic foam Handles 1
|
Reviews
There are no reviews yet.