| Content |
Battery disposal information [77,1 KB]
User's manual [7,82 MB]
LD Systems MEI1000G2
The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands.
Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously.
* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
- Product type: Transmitter
- Radio frequency range: 823 - 832 and 863 - 865 MHz
- Channels: 96 (8 groups of 12 channels)
- Transmission method: FM, stereo
- RF output: 10 mW
- Frequency response: 60 Hz - 16 kHz
- S/N ratio: 85 dB
- Inputs: 2
- Input connections: XLR/ 6.3 mm jack (combo)
- Input impedance: 14 kOhm
- Antenna connector: TNC
- Controls: up, down, set, power, volume headphone, input level, pad
- Indicators: LC display
- Power supply: 12 - 18 V DC
- Width: 200 mm
- Height: 44 mm
- Depth: 96 mm
- Accessories (included): Antenna, power supply, headphones
|
Round off your Sennheiser Tourguide System with the EK 2020-D receiver. Whether conferences, guided tours or hearing assistance: this extremely sturdy and versatile bodypack receiver provides excellent audio and ease of use for your guests. The EK 2020-D can be used with headphones or an induction neckloop for transmitting the sound to hearing aids equipped with a T coil. Digital transmission ensures optimum reception quality, with a range of up to 100 metres outdoors and around 50 metres indoors. The backlit receiver display shows all settings at a glance. Of course, the bodypack receiver can be used in mixed systems with stethoset receivers.
EK 2020-D: just right for everyone. All your guests need to do is connect their headphones or induction neckloop to the receiver. That's it! The receiver can conveniently be clipped to the shirt pocket or worn on a lanyard. When no signal is received, or when the headphones or neckloop are disconnected, the receiver will automatically switch off to save battery life. The operating time is up to 16 hours.
Features-
Digital RF signal transmission
-
Intuitive operating concept
-
16 hours battery life
-
Free choice of headphones or induction loop
-
Backlit LC display
-
Sturdy housing
| Battery disposal information [77,1 KB]
LD Systems MEI1000G2
The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands.
Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously.
* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
- Model name: LDMEI1000G2BPR
- Product type: Belt pack receiver
- Radio frequency range: 823 - 832 and 863 - 865 MHz
- Channels: 96 (8 groups of 12 channels)
- Transmission method: FM, stereo
- Frequency response: 60 Hz - 16 kHz
- S/N ratio: 80 dB
- THD:
- Audio outputs: 3.5 mm jack
- Max. audio output level: 100 mW
- Controls: Up, Down, Escape, Set, Volume
- Indicators: LC Display, Low Battery, Power
- Power supply: 2 x 1.5 V AA
- Operating time: > 13 hrs., battery-dependent
- Width: 65 mm
- Height: 90 mm
- Depth: 24 mm
|
Specifications:
- Transmit Power: Switchable 10mW, 50mW
- RF bandwidth: up to 40MHz
- Number of compatible frequencies per band: 20
- Audio frequency range: 35Hz to 15kHz
- S / N Ratio (A weighted): 90dB
- Stereo Separation: 60dB |
The ATW-T310b wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a 5V DC bian connection allowing it to be used with condenser and dynamic microphones, as well as Hi-Z instrument pickups. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. Operating on two standard AA batteries, the transmitter features high and low-level RF output settings. The low-level setting allows two additional hours of bttery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently including battery fuel remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. A dual-colour status LED illuminates green when power is on, and red when the transmitter is muted. Programmable power/mute locks limit the functioning of the transmitterʼs power/mute button as desired for particular users and applications. To match the audio input level to the transmitter, a four-position audio input gain setting selected through the function menu is provided.
The body-pack transmitter features a safety cover to protect the soft-touch controls from being accidentally activated and a recessed input connector to increase the life of the microphone cable. Constructed of high impact materials, the body-pack transmitter features a field replaceable whip antenna and captive locking battery cover door.
- RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
- Spurious Emissions: Following federal and national regulations
- Input Connection: Four-pin Locking Connector
Pin 1: GND, Pin 2: INST INPUT,
Pin 3: MIC INPUT, Pin 4: DC BIAS +5V - Batteries: Two 1.5V AA, not included
- Battery Life: High: 6 hours (alkaline), Low: 8 hours (alkaline)
Depending on battery type and use pattern. - Dimensions: 66.0 mm W x 24.0 mm D x 87.0 mm H
- Net Weight: 81 g without batteries
|
Description
The PROCAB TST200 Cable Tester comes with all audio and electronics industry standard inputs, such as XLR Male/Female (3-pin/5-pin), 3.5 mm jack, 6.3 mm jack, DIN (3-pin/5-pin), RCA, Speaker (4-pin), RJ45, RJ11, BNC. The unit has separate 'Sender' and 'Receiver' units, which are able to be locked together for ease of transport, or split apart for testing cables at either end of a signal chain.
Simply plug in either end of an audio cable into the "A" and "B" side of the device, then select your mode to check signal continuity across all active pins or conductors. The brightly coloured LED's will light up indicating signal continuity and which pins are connected together. The inbuilt speaker of the TST200 also beeps when a successful connection is made between the Sender and Receiver units. If not all connections are made, no beep will sound, and the faulty connection's LED will not be lit.
Thanks to the split unit design means you can test both cables you have on hand, as well as longer cables that are already set up. This time saving feature removes the hassle of packing down your cables just for testing. The sender unit (B) includes a switch to select the speed in which the connections are tested, as well as the power switch.
This two-part cable tester is reliable and durable, whether it be on the road or in the studio. Both the A and B units are powered separately, and each side requires 9V battery power.
Product features
| Dimensions |
165 x 168 x 45 mm (W x H x D) |
| Construction |
Plastic |
| Application |
AV & IT |
|
Rental & MI |
| Series |
Bulk & Accessories |
|
Reviews
There are no reviews yet.