LD Systems LDWS100RPS WS 100 R PS – Power Supply for LDWSECO Receiver and LDMEI Sender

20%
LD_LOGO
All products by LD SYSTEMS

€19.01 incl. GR VAT

In stock

EAN: N/A
Installments calculation €
CompareAdd to wishlist Submit Better Price
Availability: Available Available SKU: LDWS100RPS Category:
Input Voltage: 230 – 240 V AC, 50 Hz Input Voltage: 13,5 V DC, 300 mA regulated

 

Read more

  • Input Voltage: 230 – 240 V AC, 50 Hz
  • Input Voltage: 13,5 V DC, 300 mA regulated
Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “LD Systems LDWS100RPS WS 100 R PS – Power Supply for LDWSECO Receiver and LDMEI Sender”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD Systems LDWS100RPS WS 100 R PS - Power Supply for LDWSECO Receiver and LDMEI Sender removeTOA IR-700D Infrared Wireless Distributor removeAKG RA 4000B Active Dipoleantenna removeTOA IR-300M Infrared Wireless Microphone removeShure PS9E Power Supply for P4HW removeRELOOP RWM-10 HH Wireless Microphone Handheld System 853.1-864.8MHz and Receiver DEMO remove
NameLD Systems LDWS100RPS WS 100 R PS - Power Supply for LDWSECO Receiver and LDMEI Sender removeTOA IR-700D Infrared Wireless Distributor removeAKG RA 4000B Active Dipoleantenna removeTOA IR-300M Infrared Wireless Microphone removeShure PS9E Power Supply for P4HW removeRELOOP RWM-10 HH Wireless Microphone Handheld System 853.1-864.8MHz and Receiver DEMO remove
Image
SKULDWS100RPSIR-700DRA 4000BIR-300MPS9ERWM-10 HH
Rating
Price €19.01 incl. GR VAT €251.00 incl. GR VAT €209.00 incl. GR VAT €290.00 incl. GR VAT €84.00 incl. GR VAT €198.40 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock

AvailabilityIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Input Voltage: 230 - 240 V AC, 50 Hz
  • Input Voltage: 13,5 V DC, 300 mA regulated

The IR-700D is a receiver distributor used in the TOA's infrared wireless microphone system. It employs 4 receiver mixing inputs and 2 distribution outputs. By using the IR-700D in conjunction with the IR-702T Infrared Wireless Tuner, up to 16 infrared wireless receivers can be connected to the IR-702T.

Specification
Power Source AC mains, 50/60 Hz (supplied from the included AC adapter)
Power Consumption 25 W or less
Input/Output 4 mixing inputs, 2 distribution outputs
Band-Pass Frequency 3.0 - 6.0 MHz
Gain 0 dB (±3 dB)
Infrared Receiver Input 75 Ω, BNC jack × 4 (Infrared wireless receiver's power source: 24 V DC,
800 mA max. in total of 4 terminals)
Distribution Output 75 Ω, BNC jack
Operating Temperature -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F)
Operating Humidity 30 % to 85 %RH
Finish Case: ABS resin, black
Dimensions 210 (W) × 44 (H) × 200.9 (D) mm (8.27" × 1.73" × 7.91“)
Weight 640 g (1.41 lb) (unit only)
Accessory AC adapter* …1, AC Power cord (2 m (6.56 ft)) …1,
BNC plug-to-BNC plug cord (50 cm (1.64 ft)) …1, Rubber foot …4
Option Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-702T
together)

 

Carrier frequency range: 650 to 870 MHz
Total gain (antenna + internal amplifier): 17 dB
RF input: 1 BNC socket, 50 ohms
RF output: 1 BNC socket, 50 ohms
Operating voltage: 8 VDC from PS 4000 or ASU 4000 via connecting cable
Dimensions: 110 x 35 mm (4.3 x 1.4 in.)
Weight: 100 g (3.5 oz.)

  • For indoor or outdoor use, specifically, for near- field antenna setups with no preferred direction
  • Integrated high-performance antenna booster for use with antenna cables up to 180 m (600 feet) long (RG 213, in conjunction with 2 x AB 4000)
  • Remote powering option
  • Rugged, water-resistant case, BNC output
  • Status LED

The IR-300M is a hands-free infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.

Specification
Battery IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces).
Current Consumption Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H)
Infrared Emitter
Wavelength 870 nm (AM: Brightness modulation)
Modulation Method Frequency modulation
Carrier Frequency Channel A: 3.100 MHz
Channel B: 3.350 MHz
Transmission Distance Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space)
Tone Signal 32.768 kHz
Modulation Sensitivity ±4.8 kHz (1 kHz, when SPL of 84 dB is input)
Maximum Input Sound Pressure 120 dB SPL
Input Sensitivity Adjustment Adjustment range: -9 dB to 0 dB (factory preset: 0 dB)
Microphone Unit Unidirectional electret condenser microphone
Frequency Response 100 Hz - 12 kHz
Preemphasis 300 μs
Input External microphone input (φ3.5 monaural mini jack)
Battery Operation Time Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N)
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 30 % to 85 %RH
Finish Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter
Dimensions 64 (W) × 91.3 (H) ×27.3 (D) mm (2.52" × 3.59" × 1.07“)
Weight 130 g (0.29 lb) (with battery and strap)
Accessory Screw driver (for setting) …1, Color label (6 colors) …1

 

Shure PS9E Power Supply for P4HW

  • Suitable for the follpwing: T11, LX1, UT1, ULX1, MX1BP, P2R, P4R
  • For external power supplies
  • Consists of a PS21E power supply + 9V block
The Reloop RWM-10 system is the wireless solution for professional demands. True Diversity Technology ensures that the two antennaes maintain a parallel connection with the transmitter, while the stronger signal is always chosen. For outstanding transmission stability and quality which virtually prevents any signal loss. The high-quality dynamic processors of Reloopʼs professional system facilitate an excellent timbre; the customised frequency range with a clear mid-range makes the RWM-10 the ideal solution for precise voice reproduction. The HH set comes with a hand-held transmitter microphone for classic performance. features: * Ready-to-go set consists of: 1 x stationary 1 channel rack receiver with mains adapter 1 x Reloop hand-held transmitter mic with wireless transmitter * 1 channel UHF microphone with condenser capsule * True Diversity Technology for maximum receiving quality and reliable transmission * Crystal clear sound thanks to dynamic processor * 16 interference-free pre-set channels * Noise cancellation: Compressing-expanding * Quartz-controlled oscillation * Volume control * Symmetrical outputs (XLR and 6.3 mm jack plug) technical data: * UHF carrier frequencies: 853.1 – 864.8 MHz * Stability: +/- 0.003% * S/N ratio: > 90 dB * Distortion: * Frequency range: 40 Hz - 15 kHz * Sensitivity (receiver): 10 dB * Weight (receiver): 1.5 kg * Includes battery
Weight0.10 kg0.64 kg0.10 kg0.14 kg0.50 kg4.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.64 kg
Weight 0.10 kg
Weight 0.14 kg
Weight 0.50 kg
Weight 4.00 kg

Related products