User’s manual Elegant PA for musicians, DJs and conference sound systems 1,600-watt RMS/129 dB peak SPL/40 Hz to 20 kHz Large dispersion area with uniform volume coverage Feedback-free monitoring and PA system Even sound distribution with broad dispersion angle (120° horizontal) Fast and simple assembly without stands or cables Powerful bandpass subwoofer with a low […]
Elegant PA for musicians, DJs and conference sound systems
1,600-watt RMS/129 dB peak SPL/40 Hz to 20 kHz
Large dispersion area with uniform volume coverage
Feedback-free monitoring and PA system
Even sound distribution with broad dispersion angle (120° horizontal)
Fast and simple assembly without stands or cables
Powerful bandpass subwoofer with a low resonance frequency
Crystal-clear trebles and a detailed mid-range sound
LECC DSP for distortion-free audio reproduction
Protection circuits for safe, reliable operation
LD Systems MAUI 44 active column PA system with LECC DSP
The MAUI 44 is the flagship of the LD Systems MAUI series and offers an enormous 1,600 watts of total output (RMS) with a frequency response of 40 Hz to 20 kHz and a sound-level pressure of 129 dB (peak). With its outstanding sound properties and wide-ranging functions, this compact column PA is perfect for musicians, DJs and solo entertainers as well as for permanent installations.
The housing of the bandpass subwoofer is made of rugged 15 mm birch plywood and fitted with two 2 x 12″ neodymium woofers as well as two Hypex modules with separate switching power supplies. The four frequency groups of the vertical array system consist of a total of 16 3.5″ neodymium speakers with die-cast basket and integrated heat sink along with two 1″ Celestion HF drivers with wave guide. They are operated via 4 dedicated class-D power amps.
In terms of connections, the MAUI 44 offers both combo sockets (XLR/6.3 mm jack) and RCA inputs. Total and subwoofer levels can be individually adjusted, providing a perfectly balanced sound in every situation with a crystal-clear treble, a crisp mid-range and a powerful bass. The LD Systems LECC DSP (limiter, equalizer, compressor and crossover) along with two additional limiters provide distortion-free audio reproduction with an extended dynamic range, guaranteeing safe, reliable operation with effective protection circuits to prevent short circuiting, overcurrent and overvoltage.
Designed for simple transportation, the MAUI 44 consists of a subwoofer and an aluminium array with a total weight of less than 60 kg. Special multi-pin inputs reduce set-up time to a minimum, and thanks to its exceptional feedback resistance and extremely wide horizontal coverage of 120°, the system does without additional monitors.
Product type
PA Complete Systems
Colour
Black
Max. SPL (continuous)
121 dB
Max. SPL (peak)
129 dB
Frequency response
40 – 20000 Hz
Dispersion (H x V)
(horizontal) 120 °
Overall height
2223 mm
Weight
58,4 kg
Other features
LECC DSP , stable steel pins for a reliable connection between the components
Subwoofer
Low/mid driver dimensions
2 x 12 “
Woofer size
2 x 304.8 mm
Woofer magnet
Neodymium
Woofer brand
Custom-made
Cabinet construction
Bandpass
Cabinet material
15 mm Plywood
Cabinet surface
Polyurea
Subwoofer width
620 mm
Subwoofer height
412 mm
Subwoofer depth
615 mm
Subwoofer weight
40.8 kg
Subwoofer features
Custom-made multipin connector for vertical array
Mid/Hi System
Midrange size
16 x 3.5 “
Midrange size
16 x 88.9 mm
Midrange magnet
Neodymium
Midrange brand
Custom-made
Tweeter dimensions
(with Waveguide 1 x 7° tilted) 2 x 1 “
Tweeter dimensions (mm)
(with Waveguide 1 x 7° tilted) 2 x 25 mm
Tweeter magnet
Ferrite
Tweeter brand
Celestion
Loudspeaker inputs
1 each
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
aluminium
Mid/Hi system cabinet surface
powder coated
Mid/Hi system width
120 mm
Mid/Hi system height
1811 mm
Mid/Hi system depth
144 mm
Mid/Hi system weight
17.6 kg
Mid/Hi system features
vertical array with an extremely wide sound dispersion
Amplifier module (integrated in subwoofer)
Amplifier
Class D
Amplifier output system (RMS)
1600 W
Protection circuits
Multiband limiter , over voltage , over-current , short circuit
Cooling
passive
Controls
Main level , Power On/Off , Sub level
Indicators
Limit , On , Protect (protection circuit engaged) , Signal
Operating voltage
Switching power supply
Operating voltage
100 V AC – 120 V AC, 50 – 60 Hz , 220 V AC – 240 V AC, 50-60 Hz
Line inputs
2
Line input connectors
6.3 mm jack , RCA , XLR
Line outputs
1
Line output connectors
XLR
Loudspeaker outputs
1
Speaker output connections
Custom-made multipin
DSP characteristics
DSP Functions
Compressor , Crossover , EQ , limiter
Bit depth AD/DA converter
24/24 bit
Internal sampling frequency
48 kHz
Signal/noise ratio
100 dB
Weight
58.00 kg
Reviews
There are no reviews yet.
Be the first to review “LD Systems MAUI 44 Column PA System active” Cancel reply
Elegant PA for musicians, DJs and conference sound systems
1,600-watt RMS/129 dB peak SPL/40 Hz to 20 kHz
Large dispersion area with uniform volume coverage
Feedback-free monitoring and PA system
Even sound distribution with broad dispersion angle (120° horizontal)
Fast and simple assembly without stands or cables
Powerful bandpass subwoofer with a low resonance frequency
Crystal-clear trebles and a detailed mid-range sound
LECC DSP for distortion-free audio reproduction
Protection circuits for safe, reliable operation
LD Systems MAUI 44 active column PA system with LECC DSP
The MAUI 44 is the flagship of the LD Systems MAUI series and offers an enormous 1,600 watts of total output (RMS) with a frequency response of 40 Hz to 20 kHz and a sound-level pressure of 129 dB (peak). With its outstanding sound properties and wide-ranging functions, this compact column PA is perfect for musicians, DJs and solo entertainers as well as for permanent installations.
The housing of the bandpass subwoofer is made of rugged 15 mm birch plywood and fitted with two 2 x 12" neodymium woofers as well as two Hypex modules with separate switching power supplies. The four frequency groups of the vertical array system consist of a total of 16 3.5" neodymium speakers with die-cast basket and integrated heat sink along with two 1" Celestion HF drivers with wave guide. They are operated via 4 dedicated class-D power amps.
In terms of connections, the MAUI 44 offers both combo sockets (XLR/6.3 mm jack) and RCA inputs. Total and subwoofer levels can be individually adjusted, providing a perfectly balanced sound in every situation with a crystal-clear treble, a crisp mid-range and a powerful bass. The LD Systems LECC DSP (limiter, equalizer, compressor and crossover) along with two additional limiters provide distortion-free audio reproduction with an extended dynamic range, guaranteeing safe, reliable operation with effective protection circuits to prevent short circuiting, overcurrent and overvoltage.
Designed for simple transportation, the MAUI 44 consists of a subwoofer and an aluminium array with a total weight of less than 60 kg. Special multi-pin inputs reduce set-up time to a minimum, and thanks to its exceptional feedback resistance and extremely wide horizontal coverage of 120°, the system does without additional monitors.
Product type
PA Complete Systems
Colour
Black
Max. SPL (continuous)
121 dB
Max. SPL (peak)
129 dB
Frequency response
40 - 20000 Hz
Dispersion (H x V)
(horizontal) 120 °
Overall height
2223 mm
Weight
58,4 kg
Other features
LECC DSP , stable steel pins for a reliable connection between the components
Subwoofer
Low/mid driver dimensions
2 x 12 "
Woofer size
2 x 304.8 mm
Woofer magnet
Neodymium
Woofer brand
Custom-made
Cabinet construction
Bandpass
Cabinet material
15 mm Plywood
Cabinet surface
Polyurea
Subwoofer width
620 mm
Subwoofer height
412 mm
Subwoofer depth
615 mm
Subwoofer weight
40.8 kg
Subwoofer features
Custom-made multipin connector for vertical array
Mid/Hi System
Midrange size
16 x 3.5 "
Midrange size
16 x 88.9 mm
Midrange magnet
Neodymium
Midrange brand
Custom-made
Tweeter dimensions
(with Waveguide 1 x 7° tilted) 2 x 1 "
Tweeter dimensions (mm)
(with Waveguide 1 x 7° tilted) 2 x 25 mm
Tweeter magnet
Ferrite
Tweeter brand
Celestion
Loudspeaker inputs
1 each
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
aluminium
Mid/Hi system cabinet surface
powder coated
Mid/Hi system width
120 mm
Mid/Hi system height
1811 mm
Mid/Hi system depth
144 mm
Mid/Hi system weight
17.6 kg
Mid/Hi system features
vertical array with an extremely wide sound dispersion
Amplifier module (integrated in subwoofer)
Amplifier
Class D
Amplifier output system (RMS)
1600 W
Protection circuits
Multiband limiter , over voltage , over-current , short circuit
Cooling
passive
Controls
Main level , Power On/Off , Sub level
Indicators
Limit , On , Protect (protection circuit engaged) , Signal
Operating voltage
Switching power supply
Operating voltage
100 V AC - 120 V AC, 50 - 60 Hz , 220 V AC - 240 V AC, 50-60 Hz
Line inputs
2
Line input connectors
6.3 mm jack , RCA , XLR
Line outputs
1
Line output connectors
XLR
Loudspeaker outputs
1
Speaker output connections
Custom-made multipin
DSP characteristics
DSP Functions
Compressor , Crossover , EQ , limiter
Bit depth AD/DA converter
24/24 bit
Internal sampling frequency
48 kHz
Signal/noise ratio
100 dB
Delivering a massive low-end with punch and clarity, this set is ideal for outdoor sound reinforcement. With a quartet of subwoofers and two 15” tops, it easily covers medium-sized gigs at town fairs, street festivals and in marquees. We recommend this set for the following type of application: DJ, outdoor sound reinforcement for bands. The STINGER G3 IMPACT SET A is suitable for audiences of up to 400* pax. For optional stands and cables check out the "related products" section.
Set consisting of:
2 x STINGER 15 A G3 – 15” Powered loudspeaker
4 x STINGER SUB 18 A G3 – 18” Powered subwoofer
2 x STINGER 15 G3 PC – Padded protective cover for loudspeaker
4 x STINGER SUB 18 G3 PC – Padded protective cover for subwoofer
4 x STINGER SUB 18 G3 CB – Castor board for subwoofer
*NOTE: Audience size specifications are approximate only. The actual numbers may vary depending on room acoustics and environment.
Specifications
General
Product type
PA system
Type
Passive
System output (RMS):
3,400 W
Frequency response
35 – 20,000 Hz
Dispersion (H x V)
90 x 50°
Weight
260 kg
Items in this set
LD Systems STINGER SUB 18 G3 PC Padded protective Cover for Stinger® G3 Subwoofer 18"
Color
Black
Product type
PA Subwoofer Accessories
Type
Covers
Material
Nylon 1680D
Thickness of the padding
8 mm
Depth
625 mm
Width
567 mm
Height
470 mm
Weight
1,5 kg
LD Systems STINGER SUB 18 G3 CB Dolly Board for Stinger G3 Subwoofer 18" Models
Product type
PA Complete Systems Accessories
Material
Birch multiplex
Type
castor boards
Material thickness
15 mm
Surface
Polyurea
Color
Black
Number of casters
4
Wheel diameter
100 mm
Manufacturer of castors
Adam Hall
Number of drag castors
2
Length
650 mm
Width
540 mm
Weight
7 kg
LD Systems STINGER 15 A G3 Active 15" 2-way bass-reflex PA Loudspeaker
Product type
PA loudspeaker
Type
active
Low/mid driver dimensions
15 "
Woofer size
381 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
3 "
Woofer voice coil (mm)
76.2 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF driver size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF driver voice coil
25.4 mm
Dispersion (H x V)
90 x 50 °
System Power (RMS)
500 W
Peak power
1000 W
Frequency response
50 - 20000 Hz
Max. SPL (peak)
133 dB
Protection circuits
Multiband limiter, over-current, thermal overload
Input sensitivity
-5 dBu
Controls
2 x gain, 2 x Mic/Line
Indicators
Mic
Line input connectors
6.3 mm jack, XLR
Line outputs
1
Operating voltage
Switching power supply
Cabinet material
15 mm Plywood
Monitor angle
54 °
Width
480 mm
Height
737 mm
Depth
455 mm
Weight
26,8 kg
LD Systems STINGER 15 G3 PC Padded protective Cover for Stinger® G3 PA Loudspeaker 15"
Product type
PA Loudspeakers Accessories
Material
Nylon 1680D
Height
700 mm
Width
510 mm
Depth
460 mm
Weight
1 kg
LD Systems STINGER SUB 18 A G3 Active 18" bass-reflex PA subwoofer
Product type
PA subwoofer
Low/mid driver dimensions
18 "
Woofer size
457.2 mm
Woofer magnet
Ferrite
Woofer voice coil
4 "
Woofer voice coil (mm)
101.6 mm
Amplifier
Class D
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
System Power (RMS)
800 W
Peak power
1600 W
Frequency response
35 - Low-Pass Hz
Line inputs
2
Line input connectors
6.3 mm jack, XLR
Line output connectors
XLR
Max. SPL (peak)
135 dB
Protection circuits
DC, limiter, over voltage, short circuit
Power consumption (max.)
600 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 80% (non-condensing)
Cabinet surface
Polyurea
Cabinet construction
Bass Reflex
Controls
Main level, Mode
Depth
740 mm
Indicators
Limit, Mode, On, Protect (protection circuit engaged), Signal
Line outputs
2
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching), SMPS
Cabinet material
18 mm Plywood
Width
677 mm
Height
547 mm
Weight
42,6 kg
LD Systems MIX 10 A G3
Active 2-Way Loudspeaker with Integrated 7-Channel Mixer
The ideal choice for small-scale PA and personal monitoring applications, the active LD MIX 10 A G3 integrates a 7-channel mixer and Class D amplification with 2 x 400 watts peak power. The compact bass reflex loudspeaker features a 10" custom woofer and 1" Celestion HF driver complement, 65 Hz to 20 kHz frequency response and 90° x 60° dispersion delivering crystal clear sound with punch and detail.
Accomodating a wide variety of input sources including electric instruments, smartphones, tablets, MP3 and CD players, the built-in mixer provides 3 microphone channels with 2-band EQ, 48 V phantom power plus switchable hi-Z input (CH1) and stereo line channel. The output section includes a 3-band master EQ for overall tone shaping, 4-segment LED metering and XLR monitor and subwoofer outputs. In addition, the LD MIX 10 A G3 sports a DSP with 16 effect presets, limiter and overcurrent, overload, short circuit and thermal protection. A speakON output allows powering the passive LD MIX 10 G3 to easily create a stereo setup.
The rigid enclosure is constructed with tough plywood featuring a 50° monitor angle and Dual-Tilt pole receptacle for 0° or 5° mounting angles. On its own or in tandem with the passive unit, the LD MIX 10 A G3 provides amazing performance and versatility in a lightweight, easily portable package.
Product type
PA loudspeaker
Type
active
Woofer dimensions
10 "
Woofer size
254 mm
Woofer brand
Custom-made
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Celestion
Dispersion (H x V)
80 x 70 °
Frequency response
65 - 20.000 Hz
Amplifier
Class D
Amplifier output (RMS)
2 x 200 W
Amplifier output (peak)
2 x 400 W
Max. SPL
124 dB
Protection circuits
limiter, over-current, overload, short circuit, thermal overload
LD Systems DAVE 10 G3 - Active PA-System with DSP
The LD Systems DAVE 10 G3 is the latest generation of an extremely compact active PA system. The bass reflex subwoofer provides a solid bass foundation; the satellites ensure clearly defined mids and clear treble. The 2.1 power amp module built into the subwoofer delivers 1400W Peak power, and the intelligent LD LECC DSP guarantees perfect interaction and controlled functioning. The digital signal processor includes specially optimised crossovers, separate equalisers and limiters for the bass, mid, and treble frequency ranges, and a dynamic compressor that controls the subwoofer according to volume and provides for increased punch at low volumes.
The DAVE 10 G3 system's professional features include sturdy MDF cabinets, the necessary protection circuits, RCA, XLR/jack combo and Speakon-compatible connectors, and ergonomic handles. The LD "Evolutive" handles of the subwoofer are a genuine innovation - they permit a trouble-free, secure grip from all sides! The stand support of the satellites is tilted by five degrees for perfect orientation of the speaker cabinet.
Protection covers for the system components and a castor board with a lashing strap for convenient transport are available as accessories. Matching speaker stands, spacer tubes, and mounting forks are also available separately.
The DAVE 10 G3 is especially suitable for portable use and are very convenient to transport, making it just right for solo entertainers and duos. However, it also cuts a good figure in small permanent installations, e.g., in bars and restaurants.
Type: active
Max. SPL Continuous: 115 dB
Max. SPL Peak: 126 dB
Frequency range: 45 - 19,000 Hz
Dispersion angle (H x V): 70 x 70°
Subwoofers
Woofer size: 10“
Woofer size: 254 mm
Woofer magnet: ferrite
Woofer brand: custom made
Woofer voice coil: 2“
Woofer voice coil: 50.8 mm
Cabinet type: bass reflex
Cabinet material: 15 mm MDF
Cabinet surface: textured coating
Subwoofer width: 345 mm
Subwoofer height: 430 mm
Subwoofer depth: 460 mm
Subwoofer features: Threaded flange (M20), LD Systems Evolutive handles
Mid/Hi System
Midrange size: 5,25“
Midrange size: 133.4 mm
Midrange magnet: ferrite
Midrange brand: custom made
Midrange voice coil: 1“
Midrange voice coil: 25.4 mm
Horn: radial
Tweeter size: 1“
Tweeter size: 25.4 mm
Tweeter magnet: neodymium
Tweeter brand: custom made
Tweeter voice coil: 1“
Tweeter voice coil: 25.4 mm
Mid/Hi system impedance: 4 ohms
Speaker inputs: 1
Speaker input connections: Speakon compatible
Mid/Hi system cabinet type: closed
Mid/Hi system cabinet material: 12 mm MDF
Mid/Hi system cabinet surface:: textured coating
Mid/Hi system width: 200 mm
Mid/Hi system height: 300 mm
Mid/Hi system depth: 230 mm
Mid/Hi system features: Ergonomic recessed handles, speaker stand support with 5° tilt
Amplifier module (integrated in subwoofer)
Amplifier: Class A/B
Amplifier power system (RMS) 350 W
Amplifier power system (peak): 1400 W
Protection: Short circuit, limiter, overload
Cooling System: aluminium heat sink
Controls: Power, Sub Level, Subwoofer Phase Reverse, Volume
Indicators: On/Off, Limit, Signal
Power supply: transformer
Power consumption: 600 VA
Line inputs: 2
Line input connectors: RCA, XLR/ 6.3 mm jack (combo)
Speaker outputs: 2
Speaker output connections: Speakon compatible
All-in-one column speaker for PA and monitor applications
1,000 watts peak Class-D system power offer high performance with a low weight
Powerful bass reproduction with 3 x 6.5" woofers
Balanced mids thanks to the 8 x 3" full-range speakers
Precise and silky highs with 2 x 1" high frequency drivers
Increased range and wider coverage through the array arrangement
Homogeneous dispersion pattern through a BEM-optimised tweeter wave guide
Distortion-free sound even at the highest volume thanks to LD Systems DynX® DSP technology
Full control through a 4-channel mixer including Bluetooth® Stereo Audio Streaming
Two-piece column for compact transport
Secure plug-and-play connection thanks to the wireless multi-pin mechanism
A wide range of application options through dismountable columns
Easy operation with presets for mono or stereo configuration
Extensive and smart accessories for installation and transport
A complete sound system that you can carry together with your instrument: introducing the MAUI 11 G2. The two column elements in the padded shoulder bag, the subwoofer in one hand and the guitar or keyboard in the other - and off you go! Setting up the complete system, which doubles as a PA and monitor system is just as easy thanks to the special multi-pin cable plugs. The compact and elegant MAUI 11 G2 offers an unbeatable sound quality and wide-ranging sound distribution. It was developed after years of experience in the design of the column systems as a user-friendly solution for small to medium-sized gigs and fixed installations.
The MAUI 11 G2 is equipped with three 6.5" woofers, eight 3" full-range speakers and two 1" neodymium HF drivers. They are driven by a light Class-D power amplifier boasting 1,000 watts of peak power and producing a grunty bass, balanced mids and precise and silky highs. The DynX® DSP technology from LD Systems provides top-class performance each time and the highest level of freedom from distortion. It includes a multiband limiter which protects against overloading, an EQ, a compressor and a 3-way-crossover with run time correction.
The design of the MAUI 11 G2 line array achieves a longer range, increased resistance to feedback and a wider space coverage, which makes separate monitor speakers superfluous. The wave guide of the tweeters has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves an homogeneous dispersion - Your audience hears you in the back row just as clearly as in the front.
With the integrated 4-channel mixer, system presets for mono or stereo configuration and Bluetooth® Audio Streaming, you have full control over the system. Whether you are a singer-songwriter, solo entertainer or DJ, you will be thrilled with the extraordinary sound and portability of the MAUI 11 G2. The column and the subwoofer can be set up separately: thus, the system is extremely flexible and is also an excellent choice for fixed installations. With a selection of clever transport accessories and special mounting hardware, the MAUI 11 G2 is a well thought out overall solution, down to the last details.
Product type
PA Complete Systems
Type
active
Colour
Black
Max. SPL (peak)
124 dB
Frequency response
50 - 20000 Hz
Dispersion (H x V)
120° x 20 °
Overall height
2030 mm
Weight
24,9 kg
Woofer characteristics
Low/mid driver dimensions
3 x 6.5 "
Woofer size
3 x 165.1 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
1.5 "
Woofer voice coil (mm)
38.1 mm
Cabinet construction
vented
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Subwoofer width
285 mm
Subwoofer height
650 mm
Subwoofer depth
373 mm
Subwoofer weight
16.9 kg
Mid/Hi System
Midrange size
8 x 3 "
Midrange size
8 x 76.2 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Midrange voice coil
1 "
Midrange voice coil
25.4 mm
Horn
Waveguide
Tweeter dimensions
2 x1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Neodymium
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Loudspeaker inputs
1
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
aluminium
Mid/Hi system cabinet surface
HD coating
Mid/Hi system width
96 mm
Mid/Hi system height
620 / 730 mm
Mid/Hi system depth
104 mm
Mid/Hi system weight
5.4 / 2.6 kg
Amplifier module (integrated in subwoofer)
Amplifier
Class D
Amplifier output system (RMS)
500 W
Amplifier output system (peak)
1000 W
Protection circuits
DC protection , Multiband limiter , short circuit , thermal overload
Cooling
Convection
Operating Temperature
0 - 40 °C
Humidity Range
10% to 80%, (non-condensing)
Controls
Bluetooth switch , Hi-Z Level , Line level , Main level , Mono/stereo switch , MP3/Bluetooth Level , Power , Sub level
Indicators
Limit , mono , On , Protect (protection circuit engaged) , Setup , Signal , stereo
Power connector
IEC power cable (included)
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Power consumption Off / On / Max.
0/11/600 W
Line inputs
2 x stereo
Line input connectors
RCA , XLR/6.3 mm jack
Line outputs
1 x direct out
Line output connectors
XLR
Mic inputs
1
Mic inputs
XLR/6.3 mm jack
MP3 inputs
1
MP3 input connectors
3.5 mm jack
Hi-Z inputs
1
Hi-Z input connectors
6.3 mm jack
Loudspeaker outputs
1
Speaker output connections
Custom-made multipin
DSP characteristics
Bit depth AD/DA converter
24 bit
Internal sampling frequency
48 kHz
Signal/noise ratio
100 dB
The JBL PRX ONE all-in-one powered column PA features an acoustically optimized column array featuring a 7-channel digital mixer, a full suite of professional DSP, class-leading audio connectivity, Bluetooth functionality and JBL Pro Connect universal app control.
Enjoy unmatched power and performance in a sleek, compact package: PRX ONE delivers a stunning 130db max SPL, with consistent front-to-back throw, thanks to its custom-engineered 12-tweeter column array featuring JBL AIM acoustic technology, 12-inch bass-reflex woofer and built-in 2,000-watt (peak) amplifier.
Dial in great sound fast, with fewer pieces of gear, using PRX ONE’s full suite of professional Lexicon and dbx effects including reverb, delay, compression and dbx DriveRack technology featuring AFS Pro Automatic Feedback Suppression. Connect microphones, instruments, mobile devices and wireless rigs using PRX ONE’s versatile I/Os (featuring dedicated phantom power and Hi-Z inputs and pro-grade Neutrik connectors) and sophisticated Bluetooth 5.0 features. Work faster and easier with an intuitive Soundcraft-designed dual-mode digital mixer that can be set to general mix functions or channel-strip control, all controllable via app or a built-in color LCD.
PRX ONE is ideal for DJs, musicians, entertainment venues, corporate presenters, rental companies and houses of worship. It’s the perfect solution for anyone who demands best-in-class power, acoustic performance, creative control and connectivity in a stylish, full-featured column PA that’s ideal for both installed and portable applications.
More Details
Acoustic Innovations Deliver Unrivaled Sonic Performance
With PRX ONE, every seat is the best seat in the house: 12 custom-engineered tweeters work in combination with JBL A.I.M. (Array Inumbration Mechanics) geometrically optimized array-shading technology to provide controlled, consistent front-to-back coverage and even response.
Custom-designed high-frequency transducers feature copper-capped pole pieces to reduce inductance for smoother, more precise high-frequency response; HF transducers exhibit less power compression, offering more natural performance without the need for heavy DSP. High-frequency performance is optimized down to 500 Hz, allowing the woofer to deliver a more natural, accurate bass sound. PRX ONE’s acoustically optimized woofer delivers superior performance without DSP, reducing “huffiness.”
Pristine Power at Any Volume
Go ahead, crank it up with confidence, thanks to ultra-efficient amplification that ensures you’ll be heard loud and clear at any volume level. PRX ONE’s 2,000-watt Class D amplifier with power factor correction delivers clean, stable power through various voltages, ensuring longevity of components and reliable operation anywhere. High-quality, high-linearity inductors improve efficiency and minimize total harmonic distortion. And, because the amp is fully bridged, you’ll truly tap its full power potential, with plenty of headroom to handle any scenario.
Everything You Need to Dial In Your Signature Sound
Who wants to lug cumbersome outboard effects to gigs? Sculpt your sound right inside PRX ONE with a full suite of iconic dbx and Lexicon audio effects, including reverb, delay, chorus, echo, compression, limiting and gating. Presenters, teachers and fitness instructors will always be heard loud and clear when they rely on PRX ONE’s built-in ducking feature, which lowers background music when speech is detected. Presets let you save and recall go-to settings. Four console-quality microphone preamps maintain full bandwidth, even at maximum gain. It all adds up to clean, clear, studio-quality sound, no matter how loud you go.
Sonic Success In Fewer Steps
PRX ONE’s Soundcraft-designed dual-mode mixer is optimized for fast navigation: Channel Strip Mode provides hardware control of gain, EQ and effects sends for each channel, while Mix Mode provides gain control over the 7-channel mixer. Going for next-level effects? A Triple Tier DSP interface control lets users choose experiences that match their knowledge level, from beginner to advanced. PRX ONE’s full-color LCD screen provides complete access to DSP, EQ and dynamics, and a Setup Saver saves snapshots for easy recall. Simple Success dynamic LED metering gives users a fast, easy way to verify levels and channel functions such as mute and clipping.
Your Workhorse Anytime, Anywhere System
It’s never been easier to sound your best anywhere, thanks to PRX ONE’s robust DSP and custom presets. Once you’re up and running, count on dbx Automatic Feedback Suppression to squash those screeches before they start. PRX ONE can be used in both portable applications and fixed installations; installers, presenters and houses of worship will appreciate the ability to detach and mount the PRX ONE array separately from the subwoofer, using an optional mounting accessory.
Class-Leading Connectivity
PRX ONE offers two independent channels of true +48V phantom power, plus four XLR Combo jacks, one 1/8-inch in, two dedicated Hi-Z inputs and Bluetooth 5.0 functions including audio streaming to one device and control of up to 10 devices. Two onboard USB ports can be used to charge external devices or power AKG wireless systems.
Room to Expand
PRX ONE goes the distance: XLR male Thru output offers true analog expansion with the ability to time-align multiple speakers, with up to 100ms of delay per speaker.
An All-In-One Control Ecosystem
Get hands-on anywhere with the JBL Pro Connect app, which offers control over every PRX ONE feature from mixing to DSP to Bluetooth functions. Adjust levels from anywhere in the room. Because the app and the mixer are always in sync, you’ll never have to guess where your levels are. Plus, get access to Plus get access to app-only features like speaker grouping, delay tap tempo, and whole speaker snapshots.
Tested, Trusted and Road-Tough
Every PRX ONE portable PA undergoes 100 hours of JBL stress testing to ensure that it’ll perform like a champ in real-world conditions. The system is housed in a durable shell that’s rugged enough for your most demanding gigs yet discreet enough to complement any presentation scenario.
Features
Vertical array of 12 2.5-inch drivers delivers consistent, even HF response from the front of the room to the back
Custom-designed high-frequency drivers feature copper-capped pole pieces to minimize distortion and smooth, natural high-frequency response
Wide, 130° (H) x 30° (V) dispersion pattern delivers consistent coverage across the audience area
Sophisticated crossover management and HF/LF coupling allow for more natural low-end response and smooth, uniform response across the entire frequency range
12-inch bass-reflex woofer extends low-end response to 35 Hz
2,000-watt (peak), fully bridged Class D amplifier with power factor correction and high-linearity inductors provides clean, efficient system power, superior headroom, low THD and protection from voltage spikes
Four high-efficiency, low-noise microphone preamps maintain constant bandwidth at any gain level
130 dB max SPL
Integrated 7-channel digital mixer with dual-operating mode gives users full control of their input faders or individual channel controls like bass, mid, treble and effects sends.
Powerful Lexicon effects engine with delay, reverb chorus, echo and sub synth, with presets for easy setup
Triple Tier DSP control offers multi-level user experiences based on knowledge level
dbx DriveRack Inside technology features AFS (Automatic Feedback Suppression), 8-band master EQ, system limiter, plus gates and compressors on each channel for unrivaled dynamic control
One-touch ducking by Soundcraft ensures speech is always heard
Simple, intuitive full-color LCD screen provides easy access to all PRX ONE functions
8 user presets instantly optimize system sound
Robust audio connectivity: I/Os include 4 XLR Combo, 2 Hi-Z, 1 1/8-inch/BT audio and 1 XLR Pass Thru
2 USB 2.0 ports charge devices and power AKG wireless systems (with optional JBL adapter cable)
Two channels of true +48V phantom power expand microphone support
Bluetooth 5.0 connectivity allows remote system control of up to 10 units using the JBL Pro Connect app
Full app control using JBL Pro Connect
Rugged enclosures withstand the rigors of the road
Optional bracket and adapter allow array to be wall or truss-mounted independently of subwoofer for permanent installations
Computer-modeled ComfortGrip handle simplifies transport
Included nylon carrying bag for array
Attractive, discreet form factor
Weight: 55.65 lbs (25.7 kg)
Tech Specs
Type: Powered PA Speaker
Speaker Drivers: 1 x 12" LF, 12 x 2.5" HF
Number of Mixer Channels: 7
Crossover Frequency: 260Hz
EQ: 3-band Channel EQ
Effects: Reverb, Delay, Chorus
Inputs: 4 x XLR-1/4" combo, 2 x 1/4" (Hi-Z), 1 x 1/8" (aux), 1 x XLR
USB: 2 x Type A
Bluetooth: Yes, v5.0
Total Power: 1000W RMS, 2000W Peak
Mounting Options: Floor
Power Source: Standard IEC AC power supply
Height: 80.3"
Width: 17.6"
Depth: 14.7"
Net Weight: 25.7 kg (56.6 lbs)
Gross Weight: 31.75 kg (69.9 lbs)
Diamensions: 850 mm x 482 mm x 647 mm (33.4 in x 18.9 in x 25.4 in)
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.