| Content | Developed in Germany, the UHF Diversity wireless systems from the U300 series deliver excellent audio performance. They achieve a range of 100 metres in ideal conditions and are available in 5 frequency bands: 584 MHz - 608 MHz, 655 MHz - 679 MHz, 823 MHz - 832 MHz + 863 MHz - 865 MHz, 470 MHz - 490 MHz or 514 MHz - 542 MHz. Six U300 systems can be used simultaneously for each frequency band. Convenient one-touch synchronisation via infrared ensures fast, problem-free wireless connection between the transmitter and receiver, while a squelch with pilot tone ensures disruption-free operation.
U300 transmitters have a 10 mW output and an operating time of 10 hours on two AA batteries. The handheld microphone’s frequency response ranges from 55 Hz to 16 kHz. With a lower cut-off frequency of 25 Hz, the bodypack is also suitable for transmitting 5-string bass guitars with a deep H string. The bodypack’s input level can be adjusted to both active and passive guitars and basses over three levels. The power switch features a handy standby mode for temporary muting. The U300 receiver is fitted with a bright LCD channel display, an LED chain for displaying audio signal strength and both a balanced XLR and an unbalanced 6.35 mm audio output. The audio output can also be switched to instrument level for directly connecting to guitar and bass amplifiers.
U300 series wireless systems feature a fresh, modern design and are available as vocal sets with receiver and dynamic handheld microphone with cardioid characteristic, bodypack and headset or bodypack and lavalier microphone. The microphone characteristic can be changed using U500 series replaceable heads. U300 instrument sets are available with bodypack and clip-on microphone for wind instruments or a double-shielded low-capacitance cable for guitars and basses.
Product type
Wireless Microphone Systems
Product type
Wireless Microphone System Accessories
Transmission frequency range
584 - 608 MHz
Frequency response
55 - 16000 Hz
Signal-to-noise ratio
104 dB
Rated HF output power
10 mW
Other features
IR frequency synchronisation, Pilot tone
Indicators
ASC IR Sync (Green/Amber Blinking LED), Battery (low battery: red), Power LED (Power ON: green)
Operating voltage
2 x AA battery
Frequency response
25 - 16,000 Hz
Transmission optimization
Pilot tone
Total Harmonic Distortion (THD)
< 0.3 %
Audio output, balanced
XLR
Audio output, unbalanced
6.3 mm jack, switchable unbalanced output level
Max. output level
+10 dBu (Bal), +7 dBV (Unbal, Line), +2,5 dBV (Unbal, Instr) dBu
Controls
ASC Sync, Channel down, Channel up, Line/Instrument Level, Power, volume
Indicators
5 LED VU meters, Antenna A/B, LC display
Operating voltage
12 V DC - 18 V DC (500 mA), external power supply
Accessories (included)
2 x AA battery, Audio cable, Power supply
|
MicLink Wireless aims to take the complexity, frustration, and cost out of traditional wireless systems - creating a flexible, all-in-one solution that gets you up and running with the dynamic mic of your choice.
Main features
- Universal XLR transmitter converts any Lo-Z dynamic microphone into a wireless system
- Simple single-button pairing of transmitter/receiver; connects in seconds
- Enjoy up to 60 feet (18.3 m) of reliable connectivity and over 6 hours of battery life
- Lithium ion-powered transmitter conveniently recharges via USB
- Connect up to 5 wireless systems simultaneously
- Reliable 2.4 GHz spectrum; 14 Channels
- Compact receiver with 1/4' out and antenna; powered via battery (AAAx3) or included AC adapter
- Ideal for all but the largest sound environments: Small to medium stages, karaoke, public speaking, wedding, business presentations, and beyond
|
System Includes | BLX2 | Handheld transmitter with choice of microphone cartridge. | | BLX4 | Single channel wireless receiver with microprocessor-controlled internal antenna diversity. |
Shure BLX Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it's the most accessible way to own the stage.
Includes BLX4 single-channel receiver, BLX2/PG58 handheld transmitter, microphone clip, power supply, 2 AA batteries, and user guide.
| The HT-300 metal handheld transmitter is made to withstand the rigors of daily use but still be comfortable in your hand. The PL22 dynamic microphone is the perfect all-around microphone for speaking engagements, singing and emcees. The cardioid pick up pattern rejects noise from the surroundings, helps to control audio feedback, and still allows an experienced vocalist to work the microphone. The receiver for the R300 system is equally at home on a table top or in a 19 inch equipment rack. Rack mount kits and front mount antenna cables are available for the R300 for a professional installation. For applications with up to 4 receivers in one rack, the APD4+ antenna splitter can provide antenna and power feeds.
Antennas Flexible TNC 1/2 Wave
Audio Frequency Response 80 Hz - 18kHz +/- 2dB
Battery Life 14 hours with (2) AA alkalines typical
Case Material Metal
Connector Type 1/4 inch unbalanced, 3-pin XLR balanced
Controls on/off, Set, Up, Down, Sync
Distortion (@ 1 kHz, 40 kHz deviation) less than 1.0, 0.4 typical %
Diversity True Antenna
Dynamic Range greater than 95 dB
Element PL22 Cardioid Dynamic
Power Supply 12 VDC, 500mA max
Receiver Type Synthesized PLL Agile UHF
RF Frequency Range 16 MHz
RF Output 8 mW typical
RF Sensitivity (12 dB SINAD) less than 1.0 uV
Signal-to-Noise Ratio (A-weighted) greater than 100 dB
Squelch Tone code plus Amplitude |
The Audio Technica 3000 Series wireless systems provide reliable, professional UHF technology for the most demanding of applications. The ATW-3171 is a frequency agile, true-diversity handheld wireless microphone system including the ATW-R310 receiver and ATW-T371 handheld Transmitter.
The ATW-R310 receiver features frequency adjustable UHF reception, allowing access of up to 200 user selectable channels. Diversity reception allows 2 build-in, independent receivers to relay on a single frequency for the strongest possible reception. The rear panel reveals both unbalanced 1/4" Phone and balanced XLR outputs. A comprehensive back-lit LCD display reveals channel and frequency settings, signal status and transmitter battery status. The receiver also features a ground lift switch, convenient in settings where bad power feeds result in ground hum and noise on the output stage.
The ATW-T371 handheld transmitter features an ATM710 cardioid condenser element. The cardioid polar pattern effectively minimizes noise and feed-back at the off-axis sections. The condenser element increases sensitivity and provides details, accurate audio reproduction.
Frequency Agile The system operates on UHF frequencies allowing greater channel selectability and range. The transmitter and receiver feature 200 user selectable channels. Diversity Reception The ATW-R310 receiver features dual internal receivers. The receivers relay between each-other, vying for the strongest reception while minimizing noise and signal drop-out. ATW-T371 Handheld Transmitter The handheld transmitter features a cardioid capsule which minimizes noise at the off-axis sections of the microphone.
| System |
|---|
| Type of System |
UHF Frequency Agile Handheld |
| RF Carrier Frequency Range |
Band D - 655.500 MHz - 680.375 MHz |
| Approx. Working Range |
300 feet |
| Overall Frequency Response |
70Hz to 15kHz |
| Signal-to-Noise Ratio |
110 dB at 35 kHz deviation (IEC-weighted), maximum modulation 75 kHz |
| # Of Channels |
200 Channels |
| # Of Simultaneous Systems |
6 |
| Receiver |
|---|
| Type of Receiver |
Dual independent receivers, automatic-switching diversity |
| Type of Outputs |
Unbalanced: 1/4" TS (“mono“) phone jack
Balanced: XLRM-type |
| Headphone Monitoring |
No |
| Power Requirements |
120V AC 60 Hz; 12-18V DC, 500 mA, center positive, with external supply |
| Battery Type/Approx. Life |
AC Powered Only |
| Display |
Back-Lit LCD Display & Battery / Signal Status LED |
| Mounting Options |
Table Surface / Rack Mountable rack ears included |
| Antenna Type |
Internal |
| Dimensions |
8.27 x 1.93 x 6.93" (210.0 x 49.0 x 176.0mm) (WxHxD) |
| Weight |
9.9 oz (280 grams) |
| Transmitter |
|---|
| Type of Transmitter |
Frequency Agile Handheld |
| Type of Input Connector |
not applicable |
| Type of Microphone |
ATM710 Condenser Element |
| Polar Pattern |
Cardioid |
| Interchangeable Mic Heads |
No |
| Battery Type/Approx. Life |
(2) 1.5v AA Alkaline not included |
| Mute Switch |
Power / Mute switch dual function |
| Level Control |
No |
| Antenna Type |
BNC Flexible UHF |
| Display |
Back-Lit LCD Display & Battery / Signal Status LED |
| Dimensions |
9.33 x 1.89" (237.0 x 1.89)(Length x Diameter) |
| Weight |
2.4 lbs (1.1 kg) |
| Packaging Info |
|---|
| Package Weight |
5.5 lb |
| Box Dimensions (LxWxH) |
15.0 x 13.25 x 3.75“ |
| The WMS40 mini2 Sets ensure brilliant sound and ease of use at an unbeatable price/performance ratio.
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic
sound at any time.
The SR40 mini2 receiver provides three status LEDs each for channels 1 and 2, indicating ON/OFF
status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the
level at the ¼" output jack. Each receiver comes with a universal 12-V switched mode power supply with
EU, UK, and US adapters. The illuminated ON/OFF button switches both channels on and off
simultaneously.
The PT40 mini bodypack is probably the smallest and lightest transmitter in its class. A reliable mini XLR
input allows you to connect every compatible AKG miniature microphone.
The rugged HT40 mini handheld transmitter features an ON/OFF/MUTE switch and a sturdy wire-mesh
cap protecting the cardioid dynamic microphone element. Battery life is the same legendary 30 hours off
a single AA battery as for the standard WMS40 models, reducing the need to replace batteries and thus
saving real money in the long run. Consumer Alert (for US users)
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: The system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change.
KEY SPECIFICATIONS
Carrier frequency range 660 to 865 MHz
Modulation FM
Audio bandwidth 40 to 20,000 Hz
Frequency stability (-10°C to +50°C) ±15 kHz
T.H.D. at 1 kHz typ. 0.8%
Compander integrated
Signal/noise ratio typ. 105 dB(A)
RF output typ. Max. 10 mW
Power requirement single 1.5-V AA size battery
Battery life >30 hours |
Reviews
There are no reviews yet.