TASCAM DR-10CS Portable recorder

215.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Features at a glance To TOP Supports Sennheiser wireless system mics and transmitters (DR-10CS) Supports Shure wireless system mics and transmitters (DR-10CH, DR-10CS with optional AK-DR10CH panel) Supports Sony/RAMSA wireless system mics and transmitters (DR-10CS/DR-10CH with optional AK-DR10CR panel) Note: The Sony/RAMSA panel has a sliding switch to allow proper wiring configuration 48kHz/24-bit linear PCM […]

 

Read more

Features at a glance

To TOP
  • Supports Sennheiser wireless system mics and transmitters (DR-10CS)
  • Supports Shure wireless system mics and transmitters (DR-10CH, DR-10CS with optional AK-DR10CH panel)
  • Supports Sony/RAMSA wireless system mics and transmitters (DR-10CS/DR-10CH with optional AK-DR10CR panel)
    Note: The Sony/RAMSA panel has a sliding switch to allow proper wiring configuration
  • 48kHz/24-bit linear PCM mono recording
  • WAV files (compatible with BWF format)
  • Media: microSD/SDHC cards (supports 32GB capacities)
  • Sliding record switch and hold function to prevent misoperation during recording
  • Dual recording function
  • automatic file closing function to prevent the loss of already recorded data
  • High/Mid/Low recording level settings
  • Low-cut filter
  • Limiter
  • Automatic level function
  • With a built-in clock function, supports BWF files that can have time information added – convenient for editing and searching
  • Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
  • Playback function allows recorded data to be checked immediately
  • Headphone output
  • Easy-to-read organic EL display
  • micro USB B port enables easy data exchange with computers
  • Records at least 10 hours on a single AAA battery * using alkaline batteries (EVOLTA)
  • Unit settings can be created and transferred as a computer text file
  • Settings can be transferred between DR-10C units using the infrared transmission function
  • Firmware can be updated using a microSD card
  • Belt clip included
  • Silicon band that can be used to attach the unit to a transmitter included
  • Custom case for storing the unit and accessories included
  • RoHS-compliant product
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “TASCAM DR-10CS Portable recorder”

Your email address will not be published. Required fields are marked *

Quick Comparison

TASCAM DR-10CS Portable recorder removeDIGIDESIGN Pro Tools Custom Keyboard — Mac removeTASCAM DP-32 SD 32-Track Digital Portastudio removeTASCAM DP-03 Digital Recording Workstation removeKORG TMR-50 BK Digital metronome, tuner and recorder removeTASCAM RC-HS2OPD Remote Control for HS-8 remove
NameTASCAM DR-10CS Portable recorder removeDIGIDESIGN Pro Tools Custom Keyboard — Mac removeTASCAM DP-32 SD 32-Track Digital Portastudio removeTASCAM DP-03 Digital Recording Workstation removeKORG TMR-50 BK Digital metronome, tuner and recorder removeTASCAM RC-HS2OPD Remote Control for HS-8 remove
Image
SKUTA/EM/000447ProToolsCustomKeyboardMacTAEM000555TA/EM/000429TMR-50-BKRC-HS2OPD
Rating
Price 215.00 incl. GR VAT 103.93 incl. GR VAT 625.00 incl. GR VAT 279.00 incl. GR VAT 51.35 incl. GR VAT 2,020.70 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Features at a glance


To TOP
  • Supports Sennheiser wireless system mics and transmitters (DR-10CS)
  • Supports Shure wireless system mics and transmitters (DR-10CH, DR-10CS with optional AK-DR10CH panel)
  • Supports Sony/RAMSA wireless system mics and transmitters (DR-10CS/DR-10CH with optional AK-DR10CR panel)
    Note: The Sony/RAMSA panel has a sliding switch to allow proper wiring configuration
  • 48kHz/24-bit linear PCM mono recording
  • WAV files (compatible with BWF format)
  • Media: microSD/SDHC cards (supports 32GB capacities)
  • Sliding record switch and hold function to prevent misoperation during recording
  • Dual recording function
  • automatic file closing function to prevent the loss of already recorded data
  • High/Mid/Low recording level settings
  • Low-cut filter
  • Limiter
  • Automatic level function
  • With a built-in clock function, supports BWF files that can have time information added - convenient for editing and searching
  • Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
  • Playback function allows recorded data to be checked immediately
  • Headphone output
  • Easy-to-read organic EL display
  • micro USB B port enables easy data exchange with computers
  • Records at least 10 hours on a single AAA battery * using alkaline batteries (EVOLTA)
  • Unit settings can be created and transferred as a computer text file
  • Settings can be transferred between DR-10C units using the infrared transmission function
  • Firmware can be updated using a microSD card
  • Belt clip included
  • Silicon band that can be used to attach the unit to a transmitter included
  • Custom case for storing the unit and accessories included
  • RoHS-compliant product

Work faster in your Pro Tools® environment with direct access to primary transport and editing functions. This affordable Digidesign® Pro Tools Custom Keyboard uses the same symbols and color coding system built into the ICON D-Control™ worksurface and other Digidesign control surfaces while retaining all the conventional alphanumeric labels that appear on standard computer keyboards.

With functionality specific to Mac systems, the keyboard features plug-and-play USB connectivity.

Features

  • Text and icons for main Pro Tools custom key commands, in addition to standard keyboard alphanumeric lettering
  • Based on Apple Mac G5 Pro Keyboard
  • Two USB ports and USB connection cord

System Requirements
  • Digidesign-qualified Mac-based Pro Tools|HD®, Pro Tools LE™, or Pro Tools M-Powered™ system. (Note that some key commands are available only with Pro Tools HD software or with the DV Toolkit™ 2 option for Pro Tools LE.)
Add 8 more ADAT optical inputs and outputs to your DM-3200 or DM-4800. Also works with older TASCAM gear such as the DM-24, DS-M71 and SX-1.The DP-32 is a home recording Portastudio with 32 tracks based on solid-state technology. The unit is equipped with colour LCD and channel strip controls to make recording simple so the user can stay creative. Up to eight tracks can be recorded at a time on a standard SD/SDHC memory card through its XLR and 6.3-mm combo jacks. Input processing like compression and limiting, an internal send effect with reverb, delay and chorus, guitar amp simulation and multi-effects for use with the instrument-level input as well as an external effects send are available during recording. For mixdown, the DP-32 offers 20 channel faders and 12 rotary controls for EQ, Pan and effects including reverb and chorus. During the mastering process, the material can be further optimized with EQ, compression and normalization. Once finished, songs can be written to CD with the built-in CD-RW drive or transferred to computer over USB to publish the songs on the Internet, for example. Main Features 32-track digital Portastudio 8 mono tracks, 12 stereo tracks (can also be used as mono tracks) Record up to 8 tracks at once with 44.1/48 kHz and 16/24-bit audio resolution Simultaneous playback of all 32 tracks Virtual tracks for alternate takes and undo Dedicated stereo master track Colour LC display and 12-encoder channel strip for simple operation Built-in 40-channel mixer Mix down your 32 playback tracks with eight input signals to the dedicated stereo master track Use the Bounce function to set tracks free by mixing multiple tracks to a single mono or stereo track Dedicated controls for EQ, pan and effect sends Solid-state recording to SD Card media for better shock resistance and reliability compared to hard drive recording 8 balanced microphone inputs on balanced combo XLR/jack connectors Switchable phantom power for 4 channels each One input switchable to instrument level for direct recording of a guitar or bass Unbalanced stereo output (RCA jacks) Balanced stereo monitor output (6.3-mm TRS jacks) Two unbalanced effect sends (6.3-mm TS jacks) Stereo headphones output (6.3-mm TRS jack) MIDI input and output for MMC, Control Change and MTC output Footswitch input (2.5-mm mini jack) for Tascam RC-3F (optional accessory) Input effects (Limiter, Compressor, Noise suppressor, Exciter) Guitar effects (Amp simulator, Reverb, Compressor, Chorus, Flanger, Phase shifter) Mixdown effects (Reverb, Delay, Stereo chorus) Mastering effect (Single/Multi-band stereo compressor, EQ, Noise shaping) Mark function (up to 99 location marks) Built-in chromatic tuner and metronome CD-RW drive for audio CD creation as well as file import and export USB 2.0 port for data backup/restore and file transfer with a computer Specifications Recording media and file systems Recording media        SD card (512 MB to 2 GB) SDHC card (4–32 GB) File system        SD card (512 MB to 2 GB): FAT16 SDHC card (4–32 GB): FAT32 Analogue audio inputs and outputs MIC/LINE INPUTS A–H, XLR (balanced) Connector        XLR-3-31 (1: GND, 2: HOT, 3: COLD) Input impedance        2.4 kOhm Nominal input level        –14 dBu Maximum input level        +2 dBu MIC/LINE INPUTS A–H, phone jack (balanced) Connector        6.3-mm TRS phone jack Input impedance        >22 kOhm or 1 MOhm (INPUT H, when LINE-GUITAR switch is set to GUITAR) Nominal input level        +4 dBu Maximum input level        +20 dBu STEREO OUT L/R connectors        RCA pin jack Nominal output level        –10 dBV Maximum output level        +6 dBV Output impedance        200 Ohm EFFECT SENDS 1/2 connectors        6.3-mm TS phone jack Nominal output level        –10 dBV Maximum output level        +6 dBV Output impedance        200 Ohm MONITOR OUT L/R connectors        6.3-mm TRS phone jack Nominal output level        –2 dBu Maximum output level        +14 dBu Output impedance        200 Ohm PHONES connector        6.3-mm TRS phone jack Maximum output power        70 mW + 70 mW or more (THD + N 0.1% or less, 32 Ohm load) Other inputs and outputs MIDI input (MIDI IN)        DIN 5 pin Format        Standard MIDI format MIDI output (MIDI OUT)        DIN 5 pin Format        Standard MIDI format USB connector        USB 4-pin mini-B type Format        Mass Storage Class USB 2.0 High Speed REMOTE connector        2.5-mm TRS jack Audio performance Frequency response        20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) Distortion        ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) S/N ratio        ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) Audio performance Frequency response        20 Hz to 20 kHz, +1/–1 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) Distortion        ≤0.01 % (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) S/N ratio        ≥90 dB (MIC/LINE INPUT to STEREO OUT/EFFECT SENDS/MONITOR OUT) Operating system requirements Windows        Pentium 300 MHz or faster 128 MB or more memory Macintosh        Power PC, iMac, G3, G4 266 MHz or faster 64 MB or more memory Recommended USB port        USB 2.0 Recommended USB host controller        Intel chipset Supported operating systems        Windows XP, Windows Vista, Windows 7 Mac OS X 10.2 or later Power requirements and other specifications Power supply        AC adaptor (TASCAM PS-1225L) Power consumption        12 W (Phantom power on) Dimensions (Width x Height x Depth, excluding projections)        514 mm x 104 mm x 340 mm Weight        6.2 kg Operating temperature        5–35 °C Design and specifications subject to change without notice.

* 8-track Digital Portastudio with CD Burner
* Records to SD/SDHC Card media
* Import audio tracks from CD
* Built-in stereo condenser microphone
* Two XLR microphone inputs with phantom power
* 1/4" stereo line inputs
* Switchable instrument-level input for guitar/bass direct recording
* Multi-band mastering effects
* 2-band EQ per track
* Internal reverb processor with dedicated send per track
* Chromatic Tuner and Metronome
* Track editing, autopunch and bounce features
* Optional RC-3F footswitch offers three switches for punch-in and transport operation
* Compact and lightweight
* Dimensions: 11.4" W x 2.1" H x 8.2" D
* Weight: 4lbs

Rhythm pattern:

Duplets, triplets, triplets without the center beat, quadruplets, and quadruplets without the center beats

Tempo accuracy:

±0.3%

Terminals:

            Input (f6.3mm, Mono-Standard Jack type)

            Headphones (f3.5mm, Stereo-mini Jack type)           

            USB (mini-Type B)      

Internal Speaker:

            Dynamic Speaker (f28 mm)                                                             

Power (Battery):

AAA battery (3.0 V) x 2

Manganese batteries or alkaline batteries, Ni-MH: Nickel metal hydride

Battery Life:

Recorder ... Approximately 16/13/11 hours

(Backlight: off/soft/auto, using alkaline batteries. Maximum of 20 minutes per

recording.)

Tuner ... Approximately 24/22/20 hours

(Backlight: off/soft/auto, A4 continuous input, using alkaline batteries)

Metronome ... Approximately 18/16/14 hours

(Backlight: off/soft/auto, tempo 120, 4 beats, maximum volume, using alkaline batteries)

Dimensions (W x D x H):

111 x 82 x 18 mm / 4/37 x 3.23 x 0.71 inches

Weight:

119 g / 4.19 oz (Including battery)

Included items:

AAA battery (3.0 V) x 2 for verifying proper operation

USB Cable

Options:

            Contact Mic = CM-100L

Computer Requirements

Windows:

A computer that satisfies the operating requirements of Microsoft Windows XP/Windows Vista/Windows 7 and is equipped with a USB port

Macintosh:

            Mac OS X 10.5 or later

 

Main Features

    * Colour TFT touch screen interface
    * 20 illuminated flash start keys

    * Up to 100 tracks available for flash start through touch screen
    * Transport and Online buttons recessed to prevent accidental operation
    * 100-mm fader with fader start capability and 0-dB lock
    * Monitor speaker and headphones output for monitoring
    * CAT6 connection to HS-2 and HS-8


Weight0.50 kg0.50 kg6.20 kg2.00 kg0.30 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.50 kg
Weight 6.20 kg
Weight 2.00 kg
Weight 0.30 kg
Weight 1.00 kg