TASCAM DR-10SG Portable recorder with microphone

Features at a glance

• Supercardioid shotgun microphone
• Shoe adapter (ISO/JIS standard) attaches to a camera accessory shoe.
• Records to microSD or microSDHC cards.
• Records 44.1/ 48 kHz, 16/24-bit, mono or poly linear PCM (WAV/BWF)files.
• Built-in clock stamps BWF files with time-of-day information for additional convenience when editing or searching for files.
• Equalizer has four presets that can be selected to match the recording conditions.
• Limiter automatically reduces high input levels to suitable levels.
• Low cut filter reduces low-frequency noise (120Hz cutoff frequency).
• Dual recording for two files to be recorded simultaneously with different gain levels.
• Slate tone for conveniently synchronizing with video files.
• Camera out jack (combined with headphone jack)outputs audio to a camera.
• Automatic file closing prevents the loss of data before the battery runs out.
• Included noise isolation arm reduces lens operation noise.
• Included attenuation cable matches output audio signal level when connected to a camera.
• Included cable clip secures attenuation and headphone cables.
• Tripod threads (ISO/JIS standards for mounting directly to a camera tripod or rig.
• Playback to headphones to check recorded file contents immediately.
• Time track increment silently and seamlessly splits a recording by creating a new file at regular intervals (about 15 minutes)for easier editing.
• File naming based on a user-specified word or the current date.
• Operates on 1 AAA battery (alkaline, rechargeable NiMH or disposable lithium)or USB bus power.
• Secondary lithium-ion battery maintains date and time information.
• 3.5mm(1/8“)headphone jack built in.
• Easy to read 96×16 dot OEL display with wide viewing angle.
• Micro-B USB 2.0 port to easily transfer files to a computer.

• Record to SD/SDHC card (Up to 32GB)
• Simultaneously record up to 4 tracks
• Record Mode：MONO, STEREO, DUAL MONO, DUAL STEREO, 4-CHANNEL
• Recording format：44.1/48/96kHz 16/24bit (WAV/BWF)
• TASCAM original HDDA microphone preamps
• Recording levels can be adjusted independently for the 1/L, 2/R and 3-4 inputs
• Two XLR/TRS inputs support +4dBu line level input and phantom power (24 or 48VDC on XLRF)
• Plug-in power and high-output mic input supported on inputs 3-4
• CAMERA OUT connector for output from the DR-60D's mixer (adjustable gain)
• CAMERA IN connector for sound monitoring from the camera
• Independent adjustable LINE OUT and HEADPHONE jacks for high-quality sound output
• 50mW/ch headphone output
• Tripod mounting socket (bottom) and DSLR mounting screw attachment (top)
• Handles protect the screen and can be used to attach a shoulder strap
• Soft-Touch Rubber Keys for silent operation
• HOLD switch to prevent accidental operation
• QUICK button feature for easy access to various functions
• 128x64 pixel LCD with backlight
• USB 2.0 connection for high-speed transferring of files
• Mini USB cable included
• Operates on 4-AA batteries, an AC adapter (sold separately) or USB bus power
• Can extend battery life with BP-6AA battery pack (sold separately)
• Dedicated remote control jack for the wired RC-10 remote control or RC-3F footswitch (both sold separately)
• Internal mixer: PAN and LEVEL controls
• Low cut filter(40/80/120Hz)
• Limiter (1/L and 2/R can be selected for link-operation)
• Delay function for microphone distance adjustment (up to 150ms)
• M-S decode function
• Slate tone generator (AUTO/MANUAL)
• Selectable duration of slate tone from four positions (0.5/1/2/3 sec, when auto-generated)
• Selectable slate tone generation. 3 positions: OFF/HEAD/HEAD+TAIL, when auto-generated
• File name format can be set to use a user-defined word or date
• Dual-recording function allows two files to be recorded simultaneously at different levels
• Auto-record function can automatically start and stop recording at set level
• Pre-recording function allows the unit to record a 2 second sound buffer before recording is activated
• Self-timer function for solo recording
• New file starts recording automatically without interruption when maximum file size is reached
• Track incrementing function allows a recording to be split by creating a new file when desired
• Jump back and play function
• Equalizer function for playback, and level alignment function to enhance the perceived overall sound pressure
• Resume function to memorize the playback position before the unit is turned off
• MARK function up to 99 points per audio track
• DIVIDE function

• The recording times shown above are estimates. They might differ depending on the SD/SDHC card in use.
• The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the SD/SDHC card.
• If recorded in mono in WAV files, the maximum recording time will be double the figures above.
• For dual and 4-channel recording in WAV/BWF format, the recording times are about half those shown above.

The D-2012C is a 6U rack mountable Remote Console Unit designed for exclusive use with the D-2008SP Digital Mixing Processor Unit. Assigned to any desired channels inside the D-2008SP by the dedicated software, the D-2012C's 12 motorized faders and 8 rotary encoders can remotely adjust their volumes. Desired preset memories can be recalled using 8 function keys. It is equipped with 1 channel line input (stereo), which allows the audio signal to be transmitted to the D-2008SP via monitor bus. Audio signals inside the D-2008SP can be monitored via monitor bus through headphones connected to a stereo headphone output. The D-2012C can be installed on a desk with the additional use of an optional D-2012AS Console Case.

The DP-24SD Digital Portastudio is a 24-track workstation, allowing eight tracks of simltaneous recording. The built-in mixer includes everything you need for a professional-sounding mix, from EQ and reverb to amp simulation and multi-band mastering effects. The Digital Portastudio series creates finished productions without the need for a computer, instead using a simple-to-use control surface to keep you creative. 

For clear display of your mix, the DP-24SD has a large color LCD displaying tracks, meters, and effects parameters. A set of 12 encoders control EQ, effects sends, and panning. Built-in effects include compression, guitar amp modeling, delay, reverb, with a total of 10 effects processirs available during mixing. 

Eight XLR mic/line inputs each provide phantom power for condenser microphones, switchable in banks of four. One input includes an instrument-level impedence switch for direct input recording of guitar or bass. Balanced monitor outputs and effects sends are also provided on the rear panel. A USB output allows tracks and mixes recorded to your SD card to be transferred to a computer for CD burning or sharing online. 

For a complete music production on a desktop, there's no simpler choice than the DP-24SD.

Designed for Windows based Pro Tools systems, the affordable Digidesign Pro Tools Custom Keyboard WIN let users work faster in their Pro Tools environment by providing direct access to primary transport and editing functions.

The Digidesign Pro Tools Custom Keyboard use the same symbols and color coding system built into the keyboards on the ICON D-Control worksurface and the other Digidesign control surfaces while retaining all the conventional alphanumeric labels that appear on standard computer keyboards. The Digidesign Pro Tools Custom Keyboard provides plug-and-play USB connectivity and offers a fresh new look at a lower price than ever before. The keyboard also supports a PS-2 connection for maximum compatibility.

Digidesign Pro Tools Custom Keyboard WIN Features

• Text and icons for main Pro Tools custom key commands, in addition to standard keyboard alphanumeric lettering
• Windows - PS-2 connection cord and USB adapter for easy connection with either method