DB TECHNOLOGIES Flexsys FM-10 Active Monitor Speaker 400W

The FM 10 renders vocals with such remarkable power, dynamics, and precision that it can serve as a compact fullrange system. This and its extended bass response make it the ideal monitor for vocals and keyboards. FM Series monitors feature a powerful DSP that offers a crossover, digital multiband limiters, phase correction, and eight variable presets that serve to adapt the monitor to the varying demands of vocalists, instrumentalists, and audio playback applications.

The NX 12-SMA is equipped with new high power 700 W digital amplifier and a newly designed 12” coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system.
The NX 12-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes:
- Floor, for stage monitoring;
- Free Field, for the use of the speakers as a stand-alone PA system.
Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road.
An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker

• • Main vocal stage monitor
• • High-output drum or keyboard monitor
• • Main PA in small venues

General Specs

• 1400 Watt Peak, 700 Watt RMS digital bi-amplification
• 129 dB max spl
• 60° x 60° constant directivity horn
• 12" High power neodymium woofer, 2.5" voice coil
• 1.7 kapton dome, 1" exit, neodymium high frequency driver
• DSP processing, floor - fre field equalization, soft limiter and protection
• Combo xlr/jack input, xlr signal output

Acoustical Specs

• Frequency Response -3 dB:50Hz ÷ 20000 Hz
• Max SPL:129dB
• Horizontal coverage angle:60°
• Vertical coverage angle:60°
• Compression Driver:1.7 kapton dome, 1" exit, neodymium
• Woofer:12" neo high power woofer, 2.5" voice coil

Processor Section

• Limiter:Soft Limiter
• Controls:Freefield, floor

Amplifier Specifications

• Total power:1400W PEAK
• High frequencies:400 W PEAK
• Low frequencies:1000 W PEAK
• Total power:700W RMS
• High frequencies:200 W RMS
• Low frequencies:500 W RMS

Cabinet Specs

• Cabinet Material:Baltic Birch
• Handles:1 on side
• Pole Mount/Cap:yes
• Grille:steel

Size/Weight

• Height:324/12.7mm/inch
• Width:550/21.6mm/inch
• Depth:417/16.4mm/inch
• Net Weight:16,5/36.3kg/lbs

The NX 10-SMA is equipped with new high power 400 W digital amplifier and a newly designed 10 " coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system.
The NX 10-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes:
- Floor, for stage monitoring;
- Free Field, for the use of the speakers as a stand-alone PA system.
Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road.
An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker.

• • Main vocal stage monitor
• • Drum or keyboard monitor
• • Main PA in small venues

General Specs

• 800 Watt Peak, 400 Watt RMS digital bi-amplification
• 127 dB max spl
• 60° x 60° constant directivity horn
• 10" High power neodymium woofer, 2.5" voice coil
• 7 kapton dome, 1" exit, neodymium high frequency driver
• DSP processing, floor - fre field equalization, soft limiter and protection
• Combo xlr/jack input, xlr signal output

Acoustical Specs

• Frequency Response -3 dB:60Hz ÷ 20000 Hz
• Max SPL:127dB
• Horizontal coverage angle:60°
• Vertical coverage angle:60°
• Compression Driver:7 kapton dome, 1" exit, neodymium
• Woofer:10" neo high power woofer, 2.5" voice coil

Processor Section

• Limiter:Soft Limiter
• Controls:Freefield, floor

Amplifier Specifications

• Total power:800W PEAK
• High frequencies:200 W PEAK
• Low frequencies:600 W PEAK
• Total power:400W RMS
• High frequencies:100 W RMS
• Low frequencies:300 W RMS

Cabinet Specs

• Cabinet Material:Baltic Birch
• Handles:1 on side
• Pole Mount/Cap:yes
• Grille:steel

Size/Weight

• Height:324/12.7mm/inch
• Width:450/17.7mm/inch
• Depth:417/16.4mm/inch
• Net Weight:14,5/31.96kg/lbs

The LDMON101A features a high end 10" co-axial speaker with a 1" compression driver and delivers 150 W RMS output power.

The Volex power supply system allows a secure connection of further active monitors, this feature enables the installation of a big active stage monitor system while using only one power plug. The monitor also features a softclip-limiter as well as a volume control.

The Housing was built out of a high quality plywood with a high resistance textured finish. The stabile front guard ideally protects the speakerbox. 

• Model Name: LDMON101A
• Type: Bass Reflex
  
• Components:
  • Woofer / Compression Driver: 10" / 1" Coaxial Custom Made Speaker
  • Amplification: Class A / B
• Dispersion: 75° x 75°
• Power: 150 W RMS
• Frequency Range: 90 Hz- 20 Khz
• SPL (1 W / 1 m): 99 dB
• Max. SPL: 121 dB
• Protection: Limiter, Circuit and Overcurrent
• Controls: Volume, On/Off Switch
  
• Indicators: Signal, Power, Limit
• Connectors:
  • Input: Line: XLR /6,3 mm jack (combo)
    
  • Output: Line: XLR
• Power Supply: Transformer
• Cabinet Material: 15 mm Plywood
• Cabinet Surface: Painting
• Dimensions: 360 x 370 x 425 mm
• Features: Ergonomic milled handles, VOLEX power plug input / output

The LD Stinger MON121AG2 is a compact active stage monitor for all mobile applications.

The specially developed 12" coaxial speaker with an integral 1" HF driver and powerful ferrite magnets stands out because of a precisely symmetrical dispersion over 75° x 75° and attains a maximum sound-level pressure of 124dB with maximum resistance to feedback. It is driven by a Class AB power amplifier with a power output of 250W RMS. The frequency response curve is 80Hz - 20kHz.

Dependable operation of the LD MON121AG2 is ensured by a limiter that prevents overloading of the speaker and a protection circuit that guards against short-circuiting.

The input is a XLR-jack combo socket, an XLR output permits looping through of the signal. Other connector panel features include a volume control, IEC power socket, LED indicators of various colours for power, signal, and the limiter function.

The elegant looking bass-reflex enclosure of the LD MON121AG2 is made of 15mm-thick multiplex finished with a durable coating. A sturdy metal grille guards against speaker damage, and ergonomically milled handles make transport easier. The monitor angle is 35°.

• Type: active
• Woofer size: 12“
• Woofer size: 304 mm
• Woofer type: coaxial speaker
• Woofer magnet: ferrite
• Woofer brand: custom made
• Woofer voice coil: 2
• Woofer voice coil: 50.8 mm
• HF driver size: 1“
• HF driver size: 25.4 mm
• HF driver magnet: ferrite
• HF driver brand: custom made
• HF driver voice coil: 1“
• HF driver voice coil: 25.4 mm
• Amplifier: Class A / B
• Dispersion angle (H x V): 75° x 75°
• Power output (RMS): 250 W
• Power output (peak): 500 W
• Frequency response: 80 Hz - 20 kHz
• Crossover frequency: 2200 Hz
• SPL (1 W/1 m): 100 dB
• Max. SPL (continuous): 116 dB
• Max. SPL (peak): 124 dB
• Protection: limiter, short-circuit
• Controls: Volume, On / Off
• Indicators: Power, Signal, Limit
• Number of line inputs: 1
• Line input connectors: XLR/ 6.3 mm jack (combo)
• Number of line outputs: 1
• Line output connectors: XLR
• Power supply: transformer
• Operating voltage: 230 V AC / 50-60 Hz
• Cabinet material: 15 mm plywood
• Cabinet type: bass reflex
• Monitor angle: 35°
• Width: 440 mm
• Depth: 360 mm
• Height: 514 mm
• Features: Ergonomic insert handles